A study of the elemental leachability and retention capability of compost

In this work a comparison is made between the different approaches that can be taken to evaluate the mobility of elements in compost. The practical consequences of the results obtained are also discussed in terms of methods for cleaning up compost and using compost in environmental remediation. The mobility of potentially toxic elements in compost is evaluated by leaching with four selected eluents, i.e. diluted sulfuric acid, oxalate, citrate and EDTA. In contrast to the chelating agents, diluted sulfuric acid was found to generally have a low leaching capability for removal of heavy metals from compost. This implies that the risk of heavy metal leaching caused by natural rainfall is likely to be low. The results obtained in the leaching experiment were compared with previous results obtained from sequential fractionation. This comparison confirmed that both methods gave similar results for predicting the lability of elements in compost. A non-linear regression analysis of the leaching curves was also conducted. The leaching curves for elements with high lability could be fitted with a two components model. The labile components identified by the kinetic model are approximately in accordance with the fractions obtained from the first step of the sequential extraction method. The kinetic speciation method is shown to be a relatively rapid and simple procedure for compost which gives more information about element lability than simple leaching experiments. The leaching reagents used in this work were not effective enough to be used for cleaning up compost with a high metal content. Compost was however shown to have a high affinity for heavy metals, with the order of affinity of metal for the compost being very similar to that seen for humic acid. Compost may therefore prove to be a good remediation material for metal contaminated waste.     

Fuel characteristics and emissions from biomass burning and land-use change in Nigeria

Nigeria is one of the 13 low-latitude countries that have significant biomass burning activities. Biomass burning occurs in moist savanna, dry forests, and forest plantations. Fires in the forest zone are associated with slash-and-burn agriculture; the areal extent of burning is estimated to be 80% of the natural savanna. In forest plantations, close to 100% of litter is burned. Current estimates of emissions from land-use change are based on a 1976 national study and extrapolations from it. The following non-carbon dioxide (CO₂) trace gas emissions were calculated from savanna burning: methane (CH₄), 145 gigagrams (Gg); carbon monoxide (CO), 3831 Gg; nitrous oxide (N₂O), 2 Gg; and nitrogen oxides (NO_x), 49 Gg. Deforestation rates in forests and woodlands are 300 × 10³ ha (kilohectare, or kha) and 200 × kha per year, respectively. Trace gas emissions from deforestation were estimated to be 300 Gg CH₄, 2.4 Gg N₂O, and 24 Gg NO_x. CO₂ emissions from burning, decay of biomass, and long-term emissions from soil totaled 125 561 Gg. These estimates should be viewed as preliminary, because greenhouse gas emission inventories from burning, deforestation, and land-use change require two components: fuel load and emission factors. Fuel load is dependent on the areal extent of various land uses, and the biomass stocking and some of these data in Nigeria are highly uncertain.     

Fractionation of butyltin species during sample extraction and preparation for analysis

Solvent extraction and evaporative concentration steps are often used in procedures for the measurement of butyltins in environmental samples. As part of a larger study utilizing radiolabeled butyltins, the loss and fractionation of butyltins during sample preparation was investigated. TBT, DBT, and MBT were extracted from acidified seawater by hexane with efficiencies of about 95–99, 50–60 and 11% respectively. In addition, losses of about 70% of DBT were found during evaporative concentration of hexane. A variety of sediment extraction procedures were tested and none were found to be highly efficient for total butyltin extraction.     

Within-and among-clutch variation of organochlorine residues in eggs of black-crowned night-herons

Within-clutch variability of DDE and PCB residues in eggs from 62 clutches of black-crowned night-herons (Nycticorax nycticorax) was small (12% and 17%) compared to among-clutch variability (88% and 83%). Significant correlations between concentrations of DDE (median r=0.8885) and of PCBs (median r=0.8244) occurred when 501 correlations were run on two randomly selected eggs from within the same clutch; no significant correlation occurred for either concentrations of DDE (median r=0.0353) or PCBs (median r=–0.0843) when eggs were not restricted to the same clutch but were restricted to the same colony. The probability of finding infrequently detected organochlorine contaminants (e.g., DDT, cis-chlordane) in eggs from the same clutch varied from 43–96% and increased as the chemical became more prevalent and the number of eggs per clutch became smaller. These results further support one of the basic assumptions of the sample egg technique, that the chemical residues in one egg in a clutch accurately reflect residues in the remaining eggs of the clutch.     

Application of multimedia exposure assessment to drinking water

A potentially important exposure route for humans is the ingestion of chemicals via drinking water. If comprehensive exposure assessments are to be completed for either existing or proposed new chemicals and cost effective control strategies developed, then a quantitative understanding of multimedia transport and fate of specific chemical pollutants must be achieved. Mathematical models provide a powerful framework into which quantitative relationships may be placed to provide guidance in reaching water quality goals. Existing, state-of-the-art media-specific toxic organic transport and fate models for atmospheric (DiDOT), land surface (NPS) and surface water processes (EXAMS) and potable water treatment (WTP) have been linked to demonstrate the technical feasibility of such an approach. Limited application and sensitivity testing of this linked modeling system has shown that the impact of various source loadings and control strategies on drinking water quality can be estimated.     

Public participation in environmental monitoring: A means of attaining network capability

In the Puget Sound region of the United States a task force of community volunteers using bees monitored environmental pollution. This paper discusses advantages and limitations of public involvement in the assessment of regional environmental problems, particularly with respect to biological monitoring. This approach not only yielded extensive information about pollution levels but also was very cost effective.Work supported by Cooperative Agreement CR-810035-01-0 with the U.S. Environmental Protection Agency, Environmental Research Laboratory, Corvallis, Oregon, U.S.A.     

Sampling and analysis for radon-222 dissolved in ground water and surface water

Radon-222 is a naturally occurring radioactive gas in the uranium-238 decay series that has traditionally been called, simply, radon. The lung cancer risks associated with the inhalation of radon decay products have been well documented by epidemiological studies on populations of uranium miners.The realization that radon is a public health hazard has raised the need for sampling and analytical guidelines for field personnel. Several sampling and analytical methods are being used to document radon concentrations in ground water and surface water worldwide but no convenient, single set of guidelines is available. Three different sampling and analytical methods-bubbler, liquid scintillation, and field screening-are discussed in this paper. The bubbler and liquid scintillation methods have high accuracy and precision, and small analytical method detection limits of 0.2 and 10 pCi/l (picocuries per liter), respectively. The field screening method generally is used as a qualitative reconnaissance tool.     

Biodegradability: An assessment of commercial polymers according to the Canadian method for anaerobic conditions

The degradation of several biodegradable polymers was measured as a result of exposure to an anaerobic medium. The polymers investigated included materials based upon polylactic acid, polylactone, and poly(hydroxy butyrate/valerate) as well as those incorporating starch-based materials. The degradation was monitored by methane and carbon dioxide evolution. In addition, the physical and chemical changes were noted as a result of exposure. These measurements included changes in mass, dimension, and molecular weight. FTIR, UV-vis, proton, and¹³C NMR spectra were also recorded prior to and after exposure. The results clearly indicated that several biological and chemical degradation processes were occurring with the biodegradable polymers studied.Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.Issued as NRCC No. 37549.     

Genetic population structure of the recently introduced Asian clam,Potamocorbula amurensis,in San Francisco Bay

The genetic population structure of the recently introduced Asian clam, Potamocorbula amurensis, in San Francisco Bay was described using starch gel electrophoresis at eight presumptive loci. Specimens were taken from five environmentally distinct sites located throughout the bay. The population maintains a high degree of genetic variation, with a mean heterozygosity of 0.295, a mean polymorphism of 0.75, and an average of 3.70 alleles per locus. The population is genetically homogeneous, as evidenced from genetic distance values and F-statistics. However, heterogeneity of populations was indicated from a contingency chi-square test. Significant deviations from Hardy-Weinberg equilibrium and heterozygote deficiencies were found at the Lap-1 locus for all populations and at the Lap-2 locus for a single population. High levels of variability could represent a universal characteristic of invading species, the levels of variability in the source population(s), and/or the dynamics of the introduction. Lack of differentiation between subpopulations may be due to the immaturity of the San Francisco Bay population, the general purpose phenotype genetic strategy of the species, high rates of gene flow in the population, and/or the selective neutrality of the loci investigated.     

Immunity in children with exposure to environmental lead: II. Effects on humoral immunity

Lead has been found to depress the immune system in animal studies at levels far below those responsible for overt toxicity. Literature studies in animal systems most clearly showed an effect of lead on response to a specific immunogenic stimulus. Data are sparse concerning the effects of lead on the immune system in the human population at greatest risk for exposure-children up to six years of age. This portion of the Phase I study reports concentrations of IgG, IgM, IgA, and IgE, as well as antibody titers to the specific antigenic stimuli provided by the vaccines against diphtheria, tetanus, and Rubella. The study population consisted of a group of 193 children, ages 9 months to 6 years, who participate in the WIC (Women, Infants and Children) and Lead Poisoning Prevention Programs in the urban area of Springfield-Greene County Missouri. Blood lead levels ranged from 1 to 50 g dL^–1. Total Ig levels were determined and the data were analysed. No consistent significant differences were observed among the risk categories in the five age groups examined. A single Ig class in each of three age groups showed apparent significant differences among the various risk categories, but these differences were not correlated with blood lead. An analysis of specific antibody titers to diphtheria, tetanus, and Rubella was performed. Regression analyses of current data in Phase I of this study suggest a detrimental effect of lead on the antibody titres to diphtheria and Rubella.