电化学氢化物发生法处理含锑废水及对锑的回收

采用电化学氢化物发生法对模拟含锑废水进行处理,锑与水电解产生的氢形成氢化物从溶液中脱除,而后收集并加热分解锑化氢得到金属锑.实验表明,在酸性条件下对Sb(Ⅲ)去除效果较好,p H=4时去除率为76.1%.Sb(Ⅲ)与电解水产生的氢结合形成锑化氢从溶液中逸出是溶液中锑去除的最主要途径(回收率为66.2%),电沉积和吸附也对锑的去除做出少量贡献.Sb(Ⅴ)须预还原为Sb(Ⅲ)再氢化进行去除.试用了铅、石墨、钨这3种电解阴极材料,铅电极处理效果最佳.     

夏、冬季降雨中溶解性有机质(DOM)光谱特征及来源辨析

利用紫外-可见光谱与三维荧光光谱,结合拉格朗日混合单粒子轨道模型及火点图,研究了重庆2013年夏、冬两季雨水DOM光谱特征,并对其来源进行解析.结果表明,雨水DOM与水体、土壤DOM具有类似性质光谱特征,证明降雨DOM也是陆地及水环境中DOM地化特征的重要贡献者.雨水DOM中DOC含量为0.88~12.80 mg·L-1,CDOM含量在3.17~21.11m-1之间,夏、冬两季降雨DOM差异明显(P0.05).与夏季相比,冬季降雨DOM分子量较小,芳香性程度较低,腐殖化程度也更低,输入主要以本地和短距离输送为主;而夏季DOM来源较分散.尽管吸收和荧光光谱可用于解析雨水DOM组成和来源,但在光谱特征的解析和来源识别上与其他来源DOM有所区别,传统"内、外源区分"并不适用于雨水DOM.     

石油降解菌的分离鉴定及4株芽胞杆菌种间效应

通过富集培养和分离纯化的方法,从天津大港油田石油污染土壤和渤海海上钻井平台洗油污水中分离出6株石油降解细菌,生理生化试验及16S r DNA序列分析鉴定表明,它们分别属于Bacillus芽胞杆菌属(S1、S2、S3、S4)、Pseudomonas假单胞菌属(W1)和Ochrobactrum苍白杆菌属(W2),其中,S3具有最高的烷烃(41.3%)和芳烃(30.9%)降解率,从石油污染场地中筛选出的内源微生物对本油田石油的降解效果优于外源物种.对4株芽胞杆菌属菌株构建微生物组进行石油降解实验,结果表明,由S1和S4构成的微生物组F3具有最高的烷烃(50.5%)和芳烃(54.0%)降解率,比单菌降解率分别提高了69.9%和156.1%,同时比最优降解单菌S3的降解率分别高出22.1%和74.6%,而由S2和S3构成的微生物组F4对烷烃和芳烃的降解率最低,分别为18.5%和18.9%,比单菌降解率降低了55.3%和39.0%,实验表明同菌属微生物种间对石油的降解同时存在协同促进和拮抗抑制作用,芽胞杆菌属内亲缘性近的菌株之间对石油降解主要表现为促进作用.     

改良剂对广西环江强酸铅锌污染土壤的修复作用

广西环江沿岸农田土壤具有强酸、多重金属污染等特点,失去了农业生产能力,为此,本研究试用了土壤淋溶实验探究不同类型改良剂(生石灰、钙镁磷肥、有机肥、聚丙烯酰胺)组合对广西环江沿岸污染土壤的修复效果,土壤重金属迁移规律及对农田适耕性的影响.结果表明,对照组T1土壤酸化严重,降低清洁接触土壤层p H值,而处理方式T2、T3、T4、T5均能显著提高污染土壤p H值(P0.05),对供试土壤p H变化大小分别为2.7~3.2、1.6~2.7,均能达到南方农业生产土壤p H值范围.较对照组T1,在污染土壤0~20 cm处,处理方式T2、T3、T4、T5能有效地活化Pb,钝化Zn的作用;在清洁土壤20~60cm处,各个处理方式对DTPA-Pb、DTPA-Zn的作用不存在显著差异(P0.05).较对照组T1,处理方式T4、T5能为植物提供良好的种植营养物质,以期能为今后结合生物修复等措施提供技术支撑.     

Revealing the impact of water conservancy projects and urbanization on hydrological cycle based on the distribution of hydrogen and oxygen isotopes in water

Environmental Science and Pollution Research - In recent years, the development and utilization of water resources have imposed great impacts on hydrological characteristics and ecological...     

Polycyclic aromatic hydrocarbon and n-alkane pollution characteristics and structural and functional perturbations to the microbial community: a case-study of historically petroleum-contaminated soil

Characterization of the typical petroleum pollutants, polycyclic aromatic hydrocarbons (PAHs) and n-alkanes, and indigenous microbial community structure and function in historically contaminated soil at petrol stations is critical. Five soil samples were collected from a petrol station in Beijing, China. The concentrations of 16 PAHs and 31 n-alkanes were measured by gas chromatography-mass spectrometry. The total concentrations of PAHs and n-alkanes ranged from 973 ± 55 to 2667 ± 183 μg/kg and 6.40 ± 0.38 to 8.65 ± 0.59 mg/kg (dry weight), respectively, which increased with depth. According to the observed molecular indices, PAHs and n-alkanes originated mostly from petroleum-related sources. The levels of ΣPAHs and the total toxic benzo[a]pyrene equivalent (ranging from 6.41 to 72.54 μg/kg) might exert adverse biological effects. Shotgun metagenomic sequencing was employed to investigate the indigenous microbial community structure and function. The results revealed that Proteobacteria and Actinobacteria were the most abundant phyla, and Nocardioides and Microbacterium were the important genera. Based on COG and KEGG annotations, the highly abundant functional classes were identified, and these functions were involved in allowing microorganisms to adapt to the pressure from contaminants. Five petroleum hydrocarbon degradation-related genes were annotated, revealing the distribution of degrading microorganisms. This work facilitates the understanding of the composition, source, and potential ecological impacts of residual PAHs and n-alkanes in historically contaminated soil.

     

CO2 dynamic of Lake Donghu highlights the need for long-term monitoring

Environmental Science and Pollution Research - Inland freshwater lakes have been widely considered as significant sources of CO2 to the atmosphere. However, long-term measurements of CO2 dynamics...     

Environmental knowledge,behaviors, and attitudes regarding caffeine consumption among Chinese university students from the perspective of ecopharmacovigilance

Environmental Science and Pollution Research - Caffeine is considered the most representative pharmaceutical emerging contaminant (PEC) because of its ubiquity, high environmental abundance,...     

Effect of straw retention on carbon footprint under different cropping sequences in Northeast China

Environmental Science and Pollution Research - Inappropriate farm management practices can lead to increased agricultural inputs and changes in atmospheric greenhouse gas (GHG) emissions, impacting...     

汽车制造项目环境影响评价技术要点分析

本文在实际开展汽车制造项目环境影响评价的基础上,对汽车制造项目生产工艺及产污环节进行梳理,重点对废气、废水、固废、噪声源强核算过程和方法进行解析,对污染防治措施论证内容进行探讨,同时从清洁生产水平分析、政策相符性分析等方面的技术要点进行总结整理,梳理了目前汽车制造项目环评文件编制的要点核心,指出汽车整车制造项目环境影响评价中应关注的重点问题,主要在于挥发性有机废气源强和含氮、磷及重金属废水源强核算、物料平衡等,为下阶段汽车制造项目建设和环境管理提供参考。