Source extraction information from air quality data monitored in an Argentinean steel mill

A statistical analysis of a series of ambient air concentrations of suspended particulate matter (SPM) and NO2 is presented. Measurements were taken at four sites that belong to an Argentinean steel mill and in another site located in its vicinity. The air pollutants were measured during a three-week exploratory sampling. The monitoring sites were selected on the basis of relevant characteristics of the emission sources and the corresponding climatological statistics of the last decade. Suspended particulate matter with aerodynamic diameter of less than 10 microm (PM10) and NO2 were continuously measured at only one site, while 1-hr samples of NO2 and 24-hr samples of total SPM and SO2 were collected at the other sites. The registered concentrations show that SPM was the pollutant of major concern. A first estimate about the nature of the contribution of the different sources of particles and NO2 present in the area was obtained through the statistical analysis of measured concentration data coupled with prevalent meteorological variables.     

ROLE OF MODELS IN GROUNDWATER MANAGEMENT1

To answer the difficult question of how to integrate operation of ground and surface water supplies into their management plans, the decision-makers must be able to predict the effects of various alternative modes of operation and meteorological conditions on the groundwater basin. Many types of models have been used for simulating the behavior of groundwater basins under these changes. Analog simulators, analog computers, and digital computers have been employed for model development. To achieve plausible models, detailed hydraulic and hydrologic characteristics are required, such as data on transmissivity, storage, and net deep percolation. These data are used in the equations that form the model. Water quality, which cannot be separated from quantity, deserves equal consideration. Recently, considerable efforts have been made to develop water quality prediction tools through the use of modeling techniques.     

Genetic evidence that the “Padstow mussel” is Mytilus galloprovincialis

Electrophoretic analysis of loci controlling a variety of enzymes has been applied to samples of the Padstow mussel and typical Mytilus edulis L. living strictly sympatrically at Rock, Cornwall, England, in order to resolve the disputed status of the Padstow mussel. Small samples indicated similar monomorphic states at the GPDH, TO, MDH-2 loci and weak polymorphism at the 6 PGD locus in both types of mussel. The MDH-1 locus may be weakly polymorphic in the Padstow mussel and monomorphic in M. edulis. Large samples assayed for AP, LAP, PGM, and PHI produced data showing very large and highly significant differences in allele frequencies at three of these loci between the two groups of mussels separated on anatomical characters. At the LAP locus, significant deficiencies of heterozygotes were observed in both groups of mussels. A small percentage of mussels from Rock are difficult to assign with certainty to one or other group on anatomical and morphological criteria, but the genetic evidence indicates that most, if not all, such specimens are M. edulis. These genetic differences make it highly improbable that any significant degree of genetic exchange occurs between the two groups in nature and, taken together with the evidence of genetic resemblance of the Padstow mussel to M. galloprovincialis from Venice and that of Rock M. edulis to M. edulis, from the Gower peninsula of Wales we conclude that the Padstow mussel is indeed M. galloprovincialis.     

Anguilla anguilla L. oxidative stress biomarkers responses to copper exposure with or without beta-naphthoflavone pre-exposure

The redox cycling of heavy metals as well as their interactions with organic pollutants is a major contributor to the oxidative stress resulting from aquatic pollution. Therefore, in order to evaluate beta-naphthoflavone (BNF), Cu and BNF/Cu-induced oxidative stress with single and subsequent exposures, research was carried out in European eel (Anguilla anguilla L.). Eel gill and kidney oxidative stress biomarker responses such as lipid peroxidation (LPO), glutathione peroxidase (GPX), catalase (CAT), glutathione S-transferase (GST) and total reduced glutathione (GSH) to a single 24 h exposure to two copper concentrations (Cu-1 microM, 2.5 microM) and BNF (2.7 microM) with or without 24 h BNF (2.7 microM) pre-exposure were investigated. Cu exposure alone showed a significant gill GST increase at the lowest concentration and GSH content decrease for the highest concentration. Double BNF exposure in gill demonstrated a significant increase in LPO, CAT, GPX and GST, as well as a decrease in GSH content. However, in sequential BNF/Cu exposures, only the highest Cu concentration exhibited a significant increase in LPO and GSH as well as a decrease in GPX (vs. BNF + CW). In kidney, Cu exposure alone showed a significant CAT and GSH contents decrease for both concentrations, and at highest concentration in GPX; as well as GST increase at the lowest concentration. Double BNF exposure showed a significant increase in LPO and GST. Nevertheless, in sequential BNF/Cu exposures, both concentrations exhibited a significant increase in LPO and decrease in GSH contents. Moreover, LPO was also increased significantly in comparison to BNF+CW and the equivalent Cu exposures without BNF pre-exposure. Concerning GPX, a significant increase was observed at highest Cu concentration. In GST, a significant decrease at the lowest Cu concentration and increase at the highest Cu concentration was observed. Summarizing, a simple copper or BNF exposures have no ability to induce LPO in both gill and kidney. However, double BNF exposure induced LPO in both organs and sequential BNF/Cu exposures potentiated the risk of peroxidative damage occurrence in both organs. BNF/Cu interference on antioxidant responses differs between the studied organs. In gill, antagonistic effects were denoted with probable reflex in terms of peroxidative damage increase. In kidney, BNF pre-exposure prevented CAT and GPX inhibition by copper; though, no advantage of this effect was perceptible as defence against LPO generation. Considering BNF as a surrogate for a PAH and the detected interactions with copper, as well as the likelihood that these effects would be observed in polluted ecosystems, current results demonstrate their relevance to actual ecological exposures contributing to a better knowledge on oxidative stress mechanisms in fish.     

Contamination of butyltin compounds in Malaysian marine environments

Concentration of butyltin compounds (BTs), including tributyltin (TBT), dibutyltin (DBT) and monobutyltin (MBT) and total tin (SigmaSn) were determined in green mussel (Perna viridis), 10 species of muscle fish and sediment from coastal waters of Malaysia. BTs were detected in all these samples ranging from 3.6 to 900 ng/g wet wt., 3.6 to 210 ng/g wet wt., and 18 to 1400 ng/g dry wt. for mussels, fish and sediments, respectively. The concentrations of BTs in several locations of this study were comparable with the reported values from some developed countries and highest among Asian developing nations. Considerable concentration of BTs in several locations might have ecotoxicological consequences and may cause concern to human health. The parent compound TBT was found to be highest than those of its degradation compounds, DBT and MBT, suggesting recent input of TBT to the Malaysian marine environment. Significant positive correlation (Spearman rank correlation: r2=0.82, P<0.0001) was found between BTs and SigmaSn, implying considerable anthropogenic input of butyltin compounds to total tin contamination levels. Enormous boating activities may be a major source of BTs in this country, although aquaculture activities may not be ignored.     

Measurement of wastewater treatment efficiency by fluorescence and UV absorbance

The degree of chemical treatment in terms of removal of organic matter from different wastewaters has been investigated by employing potassium ferrate (K₂FeO₄) and ozone in various combinations. The study was performed in both the batch and the continuous flow systems. The treatment efficiency was determined through three different methods, i.e., chemical oxygen demand (COD), fluorescence and ultraviolet (UV) absorption. Fluorescence and UV absorption techniques were employed due to their specificity in measurement of humic substances, aromatic compounds and heterocyclic systems, whereas COD is a general parameter for the estimation of total organic matter. Fluorescence and UV absorbance values were correlated with respective COD values.Abdul Bari is with the Department of ChemistryShaukat Farooq is with the Department of Civil Engineering     

Biological treatment of textile wastewater using sequencing batch reactor technology

This study was conducted to biologically treat wastewater discharged from the textile industry (textiles made of cotton and/or synthetic fiber) using sequencing batch reactor (SBR) technology (activated sludge process operating on batch mode). To achieve the objectives of the study, the characteristics of textile wastewater and the biodegradation of its organic constituents under unsteady state conditions were studied. Then, a bench-scale pilot plant was used to study the performance of SBR by monitoring the settleability and change in the constituents (chemical oxygen demand and solids) over time. Results of the study showed that textile wastewater has different types of pollutants: heat, basicity, suspended solids, organic and inorganic matter, and heavy metals. The factors affecting the biodegradation of organic matter were determined as the reaction time and the ratio of initial substrate to sludge concentrations. Also, removal of solids was monitored, and the settling velocity as affected by sludge concentration was graphically presented to enable the determination of settling time. Finally, the outcome of this study was used to suggest a procedure for the design of a full-scale SBR unit for treatment of textile wastewater.     

HIA and pollution prevention control: What they can learn from each other

Following the implementation of the Pollution Prevention and Control (England and Wales) Regulations on 1st August 2000, health authorities (now Primary Care Trusts) became statutory consultees for permits issued to industry by the environmental regulators (the Environmental Agency, Local Authorities). The aims of this paper are to review the process of providing public health input in the light of its similarities to and differences from HIA and to identify the opportunities for both HIA and PPC to learn from each other's practice. We emphasise the challenges that are encountered by public health professionals who provide the public health input in the PPC. We use both our own experience of providing this input on behalf of health authorities and our expertise in HIA, environmental epidemiology and contaminated land.     

The effect of pH, temperature, and molecular size on the removal of dyes from textile effluent using manganese oxides-modified diatomite.

This work is an investigation on the use of manganese oxides-modified diatomite (MOMD) for the removal of color from textile wastewaters. The modification of the diatomite was carried out by treatment with manganese oxides; delta-bimessite type resulted. The surface area, pH(ZPC), Fourier transform infrared (FTIR), and scanning electron microscopy of MOMD were studied. The influence of concentration, pH, particle size, and temperature on the adsorption capacities of methylene blue (MB) and hydrolyzed reactive black (RB) and reactive yellow (RY) was investigated. Key thermodynamic parameters such as deltaH degrees, deltaS degrees, and deltaG degrees were also determined. The deltaH degrees of MB and hydrolyzed RB and RY was +94.64, -143.1, and -38.78 kJ/mol, respectively, whereas the deltaG degrees values of -17.68, -27.93, and -23.26 kJ/mol were obtained, indicating a spontaneous process with low activation-energy requirements. The findings further indicated that coulomb interaction, molecular size, and orientation of the dye and its surface charge played an important role in the adsorption and attachment of the dyes to the bimessite layers of MOMD.