Insights into the Porretta Terme (northern Apennines,Italy) hydrothermal system revealed by geochemical data on presently discharging thermal waters and paleofluids

Environmental Geochemistry and Health - This study focuses on the geochemical features of the presently discharging thermal and cold springs and on paleofluids from the upstream portion of the Reno...     

Effects of fluvial instability on the bed morphology in vegetated channels

Environmental Fluid Mechanics - Flume experiments are conducted to investigate the effect of streambed instability in channels with randomly-distributed vegetation, varying vegetation density and...     

Bisphenol A and Bisphenol S release in milk under household conditions from baby bottles marketed in Italy

A simple and sensitive validated analytical method based on liquid chromatography coupled to tandem fluorescence (FD) and ultraviolet (UV) spectrophotometry was applied to monitor the presence of bisphenol A and bisphenol S in plastic baby bottles marketed in Italy. The limits of detection (LOD) were 3.75 ng mL^?1 and 80.00 ng mL^?1, and those of quantification (LOQ) were 12.51 ng mL^?1 and 260.00 ng mL^?1 for BPA (FD detection) and for BPS (UV detection), respectively. BPA was found in only four samples, two samples undergone to microwave heating and two samples undergone to bottle warmer heating either at 40°C or at 80°C. Although the quantities of leached BPA were well below the reference dose for daily intake established by the European Food Safety Authority (EFSA) (4.0 µg kg^?1 bw/day), the release of BPA and BPS from these plastic materials should be carefully considered by the government authorities to increase people's awareness on this issue and to protect the most vulnerable population group.     

A human embryonic stem cell-based in vitro model revealed that ultrafine carbon particles may cause skin inflammation and psoriasis

Air pollution has been linked to many health issues,including skin conditions,especially in children.Among all the atmospheric pollutants,ultrafine particles have been deemed very dangerous since they can readily penetrate the lungs and skin,and be absorbed into the bloodstream.Here,we employed a human embryonic stem cell(h ESC)-based differentiation system towards keratinocytes,to test the effects of ultrafine carbon particles,which mimic ambient ultrafine particles,at environment related conce...     

Agricultural waste as household fuel: Techno-economic assessment of a new rice-husk cookstove for developing countries

In many rural contexts of the developing world, agricultural residues and the organic fraction of waste are often burned in open-air to clear the lands or just to dispose them. This is a common practice which generates uncontrolled emissions, while wasting a potential energy resource. This is the case of rice husk in the Logone Valley (Chad/Cameroon). In such a context household energy supply is a further critical issue. Modern liquid fuel use is limited and traditional solid fuels (mainly wood) are used for daily cooking in rudimentary devices like 3-stone fires, resulting in low efficiency fuel use, huge health impacts, increasing exploitation stress for the local natural resources. Rice husk may be an alternative fuel to wood for household energy supply. In order to recover such a biomass, the authors are testing a proper stove with an original design. Its lay-out (featuring a metal-net basket to contain the fuel and a chimney to force a natural air draft) allows a mix of combustion/gasification of the biomass occurring in a completely burning fire, appropriate for cooking tasks. According to results obtained with rigorous test protocols (Water Boiling Test), different lay-outs have been designed to improve the performance of the stove. Technical and economic issues have been addressed in the development of such a model; building materials have been chosen in order to guarantee a cost as low as possible, using locally available items. The feasibility of the introduction of the stove in the studied context was assessed through an economic model that keeps into account not only the technology and fuel costs, but also the energy performance. According to the model, the threshold for the trade-off of the stove is the use of rice husk to cover 10–15% of the household energy needs both with traditional fireplaces or with improved efficiency cookstoves. The use of the technology proposed in combination with improved woodstove would provide householders with an appropriate and convenient cooking technology portfolio, increasing the opportunities of choice of the preferred energy system for the user and allowing significant savings for the family budget (up to 50% of the total annual cooking energy expenditure). The proposed model may be used also as a tool for the evaluation of the affordability or for the comparison of different cooking technologies also in other similar contexts, given their specific techno-economic parameter values.     

A holistic life cycle analysis of waste management scenarios at increasing source segregation intensity: The case of an Italian urban area

Life cycle analysis of several waste management scenarios for an Italian urban area was performed on the basis of different source segregation collection (SS) intensities from 0% up to 52%. Source segregated waste was recycled and or/recovered by composting. Residual waste management options were by landfilling, incineration with energy recovery or solid recovered fuel (SRF) production to substitute for coal. The increase in fuel and materials consumption due to increase in SS had negligible influence on the environmental impact of the system. Recycling operations such as incineration and SRF were always advantageous for impact reduction. There was lower impact for an SS of 52% even though the difference with the SS intensity of 35% was quite limited, about 15%. In all the configurations analyzed, the best environmental performance was achieved for the management system producing SRF by the biodrying process.     

Yttrium recovery from primary and secondary sources: A review of main hydrometallurgical processes

Yttrium is important rare earths (REs) used in numerous fields, mainly in the phosphor powders for low-energy lighting. The uses of these elements, especially for high-tech products are increased in recent years and combined with the scarcity of the resources and the environmental impact of the technologies to extract them from ores make the recycling waste, that contain Y and other RE, a priority.The present review summarized the main hydrometallurgical technologies to extract Y from ores, contaminated solutions, WEEE and generic wastes. Before to discuss the works about the treatment of wastes, the processes to retrieval Y from ores are discussed, since the processes are similar and derived from those already developed for the extraction from primary sources.Particular attention was given to the recovery of Y from WEEE because the recycle of them is important not only for economical point of view, considering its value, but also for environmental impact that this could be generated if not properly disposal.     

Crossing technology and sustainability in cities’ development

This paper deals with sustainability in cities and the role technology plays in furthering sustainable results. Recently, many interventions have been implemented in cities to propose paths and models promoting the sustainability of cities from an overall perspective. Technologies are favouring the achievement of aims recalling the three spheres of sustainability as proposed by Arcadis (2017), namely “planet”, “profit”, and “people”. The ties between technology and the three spheres are investigated through a content analysis of reports issued by the 10 cities with the most significant advances in terms of becoming sustainable cities, as indicated in the Arcadis Report 2016. The results highlight technology as an element crossing sustainability, as processes and models in cities management and service provisions to citizens are significantly changing. New tools are innovating the processes addressing environmental issues, thus leading to cost efficiency and better economic conditions. Parallel to this, new models for city management and the provision of public services are addressing the need for a better quality of life for citizens and cities’ other stakeholders. Technology itself is thought of as sustainable because it should lead to efficiency and being efficient itself. A qualitative cluster analysis and a focus on excerpts from reports are proposed to highlight the ties between technologies and the elements representing key issues in managing and leading a city towards more sustainable conditions.     

Distribution of Cd and As in organs and tissues of four marine mammal species stranded along the Italian coasts

Concentrations of Cd and As were determined in organs and tissues (muscle, heart, kidney, lung and liver) of four cetacean species (Stenella coeruleoalba, Truncatus truncatus, Grampus griseus and Ziphius cavirostris) stranded along the Italian coasts during the period 2000-2009. Significant differences were found between Cd concentrations in the different analysed tissues. Particularly, the kidney shows the highest concentrations of Cd in all analysed specimens, followed by the liver. No systematic or statistically significant difference in As concentrations was found in the analysed tissues. Considerable differences of Cd and As values in samples from different geographical areas (Sicily Channel, Adriatic Sea and Tyrrhenian Sea) were found, with the highest values measured in samples from the Sicily Channel. This basically suggests that anthropogenic and natural sources significantly affect Cd and As content in cetaceans.     

Nitrate,sulphate and chloride contents in public drinking water supplies in Sicily,Italy

Water samples collected from public drinking water supplies in Sicily were analysed for electric conductivity and for their chloride, sulphate and nitrate contents. The samples were collected as uniformly as possible from throughout the Sicilian territory, with an average sampling density of about one sample for every 7,600 inhabitants. Chloride contents that ranged from 5.53 to 1,302 mg/l were correlated strongly with electric conductivity, a parameter used as a proxy for water salinity. The highest values are attributable to seawater contamination along the coasts of the island. High chloride and sulphate values attributable to evaporitic rock dissolution were found in the central part of Sicily. The nitrate concentrations ranged from 0.05 to 296 mg/l, with 31 samples (4.7% of the total) exceeding the maximum admissible concentration of 50 mg/l. Anomalous samples always came from areas of intensive agricultural usage, indicating a clear anthropogenic origin. The same parameters were also measured in bottled water sold in Sicily, and they all were within the ranges for public drinking water supplies. The calculated mean nitrate intake from consuming public water supplies (16.1 mg/l) did not differ significantly from that of bottled water (15.2 mg/l). Although the quality of public water supplies needs to be improved by eliminating those that do not comply with the current drinking water limits, at present it does not justify the high consumption of bottled water (at least for nitrate contents).