Americium,plutonium and uranium contamination and speciation in well waters,streams and atomic lakes in the Sarzhal region of the Semipalatinsk Nuclear Test Site,Kazakhstan

New data are reported on the concentrations, isotopic composition and speciation of americium, plutonium and uranium in surface and ground waters in the Sarzhal region of the Semipalatinsk Test Site, and an adjacent area including the settlement of Sarzhal. The data relate to filtered water and suspended particulate from (a) streams originating in the Degelen Mountains, (b) the Tel′kem 1 and Tel′kem 2 atomic craters, and (c) wells on farms located within the study area and at Sarzhal. The measurements show that ²⁴¹Am, ^239,240Pu and ²³⁸U concentrations in well waters within the study area are in the range 0.04–87 mBq dm⁻³, 0.7–99 mBq dm⁻³, and 74–213 mBq dm⁻³, respectively, and for ²⁴¹Am and ^239,240Pu are elevated above the levels expected solely on the basis of global fallout. Concentrations in streams sourced in the Degelen Mountains are similar, while concentrations in the two water-filled atomic craters are somewhat higher. Suspended particulate concentrations in well waters vary considerably, though median values are very low, at 0.01 mBq dm⁻³, 0.08 mBq dm⁻³ and 0.32 mBq dm⁻³ for ²⁴¹Am, ^239,240Pu and ²³⁸U, respectively. The ²³⁵U/²³⁸U isotopic ratio in almost all well and stream waters is slightly elevated above the ‘best estimate’ value for natural uranium worldwide, suggesting that some of the uranium in these waters is of test-site provenance. Redox analysis shows that on average most of the plutonium present in the microfiltered fraction of these waters is in a chemically reduced form (mean 69%; 95% confidence interval 53–85%). In the case of the atomic craters, the proportion is even higher. As expected, all of the americium present appears to be in a reduced form. Calculations suggest that annual committed effective doses to individual adults arising from the daily ingestion of these well waters are in the range 11–42 μSv (mean 21 μSv). Presently, the ground water feeding these wells would not appear to be contaminated with radioactivity from past underground testing in the Degelen Mountains or from the Tel′kem explosions.     

C60 fullerene: a powerful antioxidant or a damaging agent? The importance of an in-depth material characterization prior to toxicity assays

Since the discovery of fullerenes in 1985, these carbon nanospheres have attracted attention regarding their physico/chemical properties. Despite little knowledge about their impact on the environment and human health, the production of fullerenes has already reached an industrial scale. However, the toxicity of C₆₀ is still controversially discussed.The aim of this study was to clarify the biological effects of tetrahydrofuran (THF) suspended C₆₀ fullerene in comparison to water stirred C₆₀ fullerene suspensions. Beyond that, we analyzed the effects on the Crustacea Daphnia magna an indicator for ecotoxicological effects and the human lung epithelial cell line A549 as a simplified model for the respiratory tract.We could demonstrate that water-soluble side products which were formed in THF nC₆₀ suspension were responsible for the observed acute toxic effects, whereas fullerenes themselves had no negative effect regardless of the preparative route on either A549 cell in vitro or D. magna in vivo.     

Epiphytische Flechten im Wandel von Immissionen und Klima ? Ergebnisse einer Vergleichskartierung 1989/2007 in Nordwestdeutschland

Zusammenfassung   Hintergrund, Ziel und Zweck Borkenbewohnende (epiphytische) Flechten reagieren sehr empfindlich auf verschiedene Umwelteinflüsse wie Stoffgehalte in der Atmosph?re und Temperaturen. Sie haben als Bioindikatoren für Luftverunreinigungen einen hohen Stellenwert bei Umweltuntersuchungen. Basierend auf einer 1989 durchgeführten Kartierung borkenbewohnender (epiphytischer) Flechten in einem landwirtschaftlich intensiv genutzten Raum Nordwestdeutschlands erfolgte 2007 eine Wiederholungsuntersuchung. Dabei galt es, m?gliche Ver?nderungen der Immissionssituation und des Klimas zu erkennen. Material und Methoden Die Studie basiert auf einer vergleichenden Kartierung epiphytischer Flechten von 355 Tr?gerb?umen an 45 Monitoringpunkten. Die angewandte Methode orientiert sich an der 1989 angewandten halb-quantitativen Erfassung. Ergebnisse Es stellten sich gravierende Ver?nderungen in der Vegetation rindenbewohnender Flechten heraus. Insgesamt war eine Erh?hung der Artenzahl an nahezu allen Monitoringpunkten festzustellen. Es wurde eine sehr starke Abnahme s?uretoleranter Arten und eine deutliche Zunahme basen- und n?hrstofffordernder Flechtenarten festgestellt. Darüber hinaus zeigte sich eine deutliche Zunahme w?rmeliebender Flechtenarten mit einem Verbreitungsschwerpunkt in Südeuropa bei gleichzeitigem Rückgang von Arten mit einem boreal-montanem Verbreitungsschwerpunkt. Diskussion Die festgestellte Entwicklung steht im Einklang mit überregionalen Beobachtungen. Sie wird im Wesentlichen auf eine gro?r?umig ver?nderte Immissionssituation, d. h. einer Abnahme der atmosph?rischen SO₂-Belastung und Zunahme der Ammoniakbelastung zurückgeführt. Ebenso treten deutliche Auswirkungen der Klimaerw?rmung hervor. Schlussfolgerungen Mit relativ geringem Untersuchungsaufwand lie?en sich Ver?nderungen bei den epiphytischen Flechten in den letzten 18 Jahren aufzeigen. Diese sind relevant für die Beurteilung regional und kleinr?umig ver?nderter Umweltbedingungen, die auch für andere Organismen und ?kosysteme l?ngerfristig von gro?er Bedeutung sind. Empfehlungen und Ausblick Unter Verwendung standardisierter Methoden vermitteln epiphytische Flechten ein differenziertes Bild der Luftbelastungssituation in Ballungsr?umen und in landwirtschaftlich genutzten Regionen. Darüber hinaus sind sie offensichtlich gute Indikatoren für Temperatur?nderungen ihrer Umgebung. Weiterer Forschungsbedarf besteht für die Verwendung epiphytischer Flechten zum Biomonitoring von Klimaver?nderungen.      

Association of plutonium with sediments from the Ob and Yenisey Rivers and Estuaries

The present study applied sequential extraction techniques to investigate the binding and mobility of plutonium (Pu) in sediments from the rivers and estuaries of the Ob and Yenisey. As a study site, the Ob and Yenisey are particularly interesting as both rivers have weapons-grade Pu sources in their catchment areas, including the Russian Pu production and reprocessing plants at Mayak, Tomsk-7 and Krashnoyarsk, and the Semipalantinsk nuclear weapons testing site in Kazakhstan. Plutonium activity and ²⁴⁰Pu/²³⁹Pu ratios were determined using accelerator mass spectrometry (AMS). Sequential extractions showed that between 47 and 80% of the Pu in Yenisey River sediments and 35–53% of the Pu in soils around the Techa River are mobilized with weak oxidising agents, which can indicate that Pu is bound to organic material. In contrast, Pu in Ob and Yenisey Estuarine sediments was more strongly bound, with 60–100% being found in the HNO₃-extractable fraction. This change in speciation could reflect either that Pu bound to organic material in the Techa and Yenisey River sediments becomes more fixed to the sediments with time, or that organic-bound Pu is mobilized and released to the water when the sediments encounter the more saline water of the Ob and Yenisey estuaries. In general, ²⁴⁰Pu/²³⁹Pu ratios were relatively consistent between different extraction fractions, although, in whole sediments, an increase in ratio was observed with distance from the source. This reflects the increased influence of weapon fallout from catchment runoff within the river systems, as compared to the weapons-grade sources close to the production and reprocessing plants. Knowledge of Pu speciation in the Ob and Yenisey Rivers, and the processes controlling its behaviour in estuarine systems, can improve predictions of its transfer and subsequent environmental impact to Arctic Seas.     

Numerical analysis of water and solute transport in variably-saturated fractured clayey till

This study numerically investigates the influence of initial water content and rain intensities on the preferential migration of two fluorescent tracers, Acid Yellow 7 (AY7) and Sulforhodamine B (SB), through variably-saturated fractured clayey till. The simulations are based on the numerical model HydroGeoSphere, which solves 3D variably-saturated flow and solute transport in discretely-fractured porous media. Using detailed knowledge of the matrix, fracture, and biopore properties, the numerical model is calibrated and validated against experimental high-resolution tracer images/data collected under dry and wet soil conditions and for three different rain events. The model could reproduce reasonably well the observed preferential migration of AY7 and SB through the fractured till, although it did not capture the exact depth of migration and the negligible impact of the dead-end biopores in a near-saturated matrix. A sensitivity analysis suggests fast flow mechanisms and dynamic surface coating in the biopores, and the presence of a plough pan in the till.     

Biodegradation potential of MTBE in a fractured chalk aquifer under aerobic conditions in long-term uncontaminated and contaminated aquifer microcosms

The potential for aerobic biodegradation of MTBE in a fractured chalk aquifer is assessed in microcosm experiments over 450 days, under in situ conditions for a groundwater temperature of 10 °C, MTBE concentration between 0.1 and 1.0 mg/L and dissolved O₂ concentration between 2 and 10 mg/L. Following a lag period of up to 120 days, MTBE was biodegraded in uncontaminated aquifer microcosms at concentrations up to 1.2 mg/L, demonstrating that the aquifer has an intrinsic potential to biodegrade MTBE aerobically. The MTBE biodegradation rate increased three-fold from a mean of 6.6 ± 1.6 μg/L/day in uncontaminated aquifer microcosms for subsequent additions of MTBE, suggesting an increasing biodegradation capability, due to microbial cell growth and increased biomass after repeated exposure to MTBE. In contaminated aquifer microcosms which also contained TAME, MTBE biodegradation occurred after a shorter lag of 15 or 33 days and MTBE biodegradation rates were higher (max. 27.5 μg/L/day), probably resulting from an acclimated microbial population due to previous exposure to MTBE in situ. The initial MTBE concentration did not affect the lag period but the biodegradation rate increased with the initial MTBE concentration, indicating that there was no inhibition of MTBE biodegradation related to MTBE concentration up to 1.2 mg/L. No minimum substrate concentration for MTBE biodegradation was observed, indicating that in the presence of dissolved O₂ (and absence of inhibitory factors) MTBE biodegradation would occur in the aquifer at MTBE concentrations (ca. 0.1 mg/L) found at the front of the ether oxygenate plume. MTBE biodegradation occurred with concomitant O₂ consumption but no other electron acceptor utilisation, indicating biodegradation by aerobic processes only. However, O₂ consumption was less than the stoichiometric requirement for complete MTBE mineralization, suggesting that only partial biodegradation of MTBE to intermediate organic metabolites occurred. The availability of dissolved O₂ did not affect MTBE biodegradation significantly, with similar MTBE biodegradation behaviour and rates down to ca. 0.7 mg/L dissolved O₂ concentration. The results indicate that aerobic MTBE biodegradation could be significant in the plume fringe, during mixing of the contaminant plume and uncontaminated groundwater and that, relative to the plume migration, aerobic biodegradation is important for MTBE attenuation. Moreover, should the groundwater dissolved O₂ concentration fall to zero such that MTBE biodegradation was inhibited, an engineered approach to enhance in situ bioremediation could supply O₂ at relatively low levels (e.g. 2–3 mg/L) to effectively stimulate MTBE biodegradation, which has significant practical advantages. The study shows that aerobic MTBE biodegradation can occur at environmentally significant rates in this aquifer, and that long-term microcosm experiments (100s days) may be necessary to correctly interpret contaminant biodegradation potential in aquifers to support site management decisions.     

Cation exchange in a glacial till drumlin at a road salt storage facility

At a former wood preservation plant severely contaminated with coal tar oil, in situ bulk attenuation and biodegradation rate constants for several monoaromatic (BTEX) and polyaromatic hydrocarbons (PAH) were determined using (1) classical first order decay models, (2) Michaelis–Menten degradation kinetics (MM), and (3) stable carbon isotopes, for o-xylene and naphthalene. The first order bulk attenuation rate constant for o-xylene was calculated to be 0.0025 d^− 1 and a novel stable isotope-based first order model, which also accounted for the respective redox conditions, resulted in a slightly smaller biodegradation rate constant of 0.0019 d^− 1. Based on MM-kinetics, the o-xylene concentration decreased with a maximum rate of k_max = 0.1 µg/L/d. The bulk attenuation rate constant of naphthalene retrieved from the classical first order decay model was 0.0038 d^− 1. The stable isotope-based biodegradation rate constant of 0.0027 d^− 1 was smaller in the reduced zone, while residual naphthalene in the oxic part of the plume further downgradient was degraded at a higher rate of 0.0038 d^− 1. With MM-kinetics a maximum degradation rate of k_max = 12 µg/L/d was determined. Although best fits were obtained by MM-kinetics, we consider the carbon stable isotope-based approach more appropriate as it is specific for biodegradation (not overall attenuation) and at the same time accounts for the dominant electron-accepting process. For o-xylene a field based isotope enrichment factor ε_field of − 1.4 could be determined using the Rayleigh model, which closely matched values from laboratory studies of o-xylene degradation under sulfate-reducing conditions.     

The effects of scale and spatial heterogeneities on diffusion in volcanic breccias and basalts: Amchitka Island, Alaska

Knowledge of the factors that influence the diffusion of contaminants, such as the diffusivity and the connected porosity, is crucial to modeling the long-term fate and transport of contaminants in subsurface systems with small or negligible advective flow, such as in fractured crystalline rock. Fractured rock is naturally heterogeneous, and hence, understanding the diffusivity of a molecule through this material (or the formation factor of the medium) becomes a complex problem, with critical concerns about the scale of laboratory measurements and about the spatial variability of these measurements relative to the scale needed for fate and transport modeling. This study employed both electrical and tracer-based laboratory methods to investigate the effects of scale and pore system connectivity on the diffusivity for volcanic matrix rock derived from the study site, a former underground nuclear test site at Amchitka Island, Alaska. The results of these investigations indicate a relatively well-connected pore system with scale effects generally limited to approximately 6 cm lengths and well-correlated to observed heterogeneous features. An important conclusion resulting from this study, however, is that there is a potential for the estimated diffusivity to be misrepresented by an order of magnitude if multiple samples or longer sample lengths are not used. Given the relatively large number of measurements resulting from these investigations, an analysis of the probability density function (PDF) of the diffusivity was possible. The PDF of the diffusivity was shown to generally follow a normal distribution for individual geologic layers. However, when all of the geologic layers are considered together, the distribution of the subsurface as a whole was shown to follow a lognormal distribution due to the order of magnitude differences amongst the layers. An understanding of these distributions is essential for future stochastic modeling efforts.     

Analysis of phytochelatin complexes in the lead tolerant vetiver grass [Vetiveria zizanioides (L.)] using liquid chromatography and mass spectrometry

Ethylenediamene tetraacetic acid (EDTA) has been used to mobilize soil lead (Pb) and enhance plant uptake for phytoremediation. Chelant bound Pb is considered less toxic compared to free Pb ions and hence might induce less stress on plants. Characterization of possible Pb complexes with phytochelatins (PC_n, metal-binding peptides) and EDTA in plant tissues will enhance our understanding of Pb tolerance mechanisms. In a previous study, we showed that vetiver grass (Vetiveria zizanioides L.) can accumulate up to 19,800 and 3350 mg Pb kg⁻¹ dry weight in root and shoot tissues, respectively; in a hydroponics set-up. Following the basic incubation study, a greenhouse experiment was conducted to elucidate the efficiency of vetiver grass (with or without EDTA) in remediating Pb-contaminated soils from actual residential sites where Pb-based paints were used. The levels of total thiols, PC_n, and catalase (an antioxidant enzyme) were measured in vetiver root and shoot following chelant-assisted phytostabilization. In the presence of 15 mM kg ⁻¹ EDTA, vetiver accumulated 4460 and 480 mg Pb kg⁻¹ dry root and shoot tissue, respectively; that are 15- and 24-fold higher compared to those in untreated controls. Despite higher Pb concentrations in the plant tissues, the amount of total thiols and catalase activity in EDTA treated vetiver tissues was comparable to chelant unamended controls, indicating lowered Pb toxicity by chelation with EDTA. The identification of glutathione (referred as PC₁) (m/z 308.2), along with chelated complexes like Pb-EDTA (m/z 498.8) and PC₁-Pb-EDTA (m/z 805.3) in vetiver root tissue using electrospray tandem mass spectrometry (ES-MS) highlights the possible role of such species towards Pb tolerance in vetiver grass.