Influence of Chronic Man-made Pollution on Bromus inermis Genome Size

Russian Journal of Ecology - Technogenic pollution can accelerate microevolutionary processes in natural populations. We estimated the nuclear DNA content of 10 Bromus inermis Leyss. samples from...     

The Formation of Mg3Ca(S04)4 during the Sulfation Reaction of Dolomite

Abstract

Inspection and maintenance programs for motor vehicles in the United States increasingly use loaded mode mass emissions testing (IM240). A method was developed to predict mass emission rates and mass emission changes, particularly from repair benefits, using a low-cost, portable four-gas non-dispersive infrared (NDIR) vehicle exhaust gas analyzer. A single vehicle was tested several times with the analyzer while on the dynamometer and undergoing successive repairs. Excellent correlations for CO and HC were observed. Five vehicles were measured using an on-road driving loop before and after emissions-related repairs, while another three vehicles were tested with no repairs performed. The on-road concentration data used to guide the repair process were converted to grams per gallon; when divided by estimated miles per gallon, this gave grams per mile emissions for comparison to IM240. Correlation coefficients (r²) of 0.87 for CO and 0.76 for HC were achieved for the 13 tests. The linear correlations between IM240 and emissions measured by this method would allow repair facilities to perform a relatively inexpensive test for diagnostic purposes and to estimate repair effectiveness without the need for a dynamometer.     

Estimating Watershed Level Nonagricultural Pesticide Use From Golf Courses Using Geospatial Methods1

Abstract: Limited information exists on pesticide use for nonagricultural purposes, making it difficult to estimate pesticide loadings from nonagricultural sources to surface water and to conduct environmental risk assessments. A method was developed to estimate the amount of pesticide use on recreational turf grasses, specifically golf course turf grasses, for watersheds located throughout the conterminous United States (U.S.). The approach estimates pesticide use: (1) based on the area of recreational turf grasses (used as a surrogate for turf associated with golf courses) within the watershed, which was derived from maps of land cover, and (2) from data on the location and average treatable area of golf courses. The area of golf course turf grasses determined from these two methods was used to calculate the percentage of each watershed planted in golf course turf grass (percent crop area, or PCA). Turf‐grass PCAs derived from the two methods were used with recommended application rates provided on pesticide labels to estimate total pesticide use on recreational turf within 1,606 watersheds associated with surface‐water sources of drinking water. These pesticide use estimates made from label rates and PCAs were compared to use estimates from industry sales data on the amount of each pesticide sold for use within the watershed. The PCAs derived from the land‐cover data had an average value of 0.4% of a watershed with minimum of 0.01% and a maximum of 9.8%, whereas the PCA values that are based on the number of golf courses in a watershed had an average of 0.3% of a watershed with a minimum of <0.01% and a maximum of 14.2%. Both the land‐cover method and the number of golf courses method produced similar PCA distributions, suggesting that either technique may be used to provide a PCA estimate for recreational turf. The average and maximum PCAs generally correlated to watershed size, with the highest PCAs estimated for small watersheds. Using watershed specific PCAs, combined with label rates, resulted in greater than two orders of magnitude over‐estimation of the pesticide use compared to estimates from sales data.     

Optimality of parental investment: The influence of nursing on reproductive success of mother and female young house mice

Summary The amount of parental milk investment determines not only the number of young the parent can produce, but also affects the offspring's fitness. The antagonism between quantity and quality of offspring was investigated in laboratory mice.In nursing first litters containing 2,4, ..., 14 pups, mothers invested increasing amounts of milk. This mainly extended the intervals between their first and second litters and slightly increased the size of their second litters, whilst third litters were not affected. In the female young, the decreasing amount each individual received as a result of increasing litter size led to delayed birth and reduced the size of their first litters. The intervals between their first and second litters and the size of the second litters were also affected, although to a lesser extent.Taking these results into consideration on a standard lifetime pattern of reproduction, the effects were calculated on net reproductive rates as an expression of fitness. Death rates were assumed that referred to population equilibrium or population growth. In both situations, the fitness curves of mothers and young showed that the actual level of milk investment and the level yielding optimal reproduction were in agreement. There was no significant deviation towards increased investment, as might result from parent-offspring conflict.     

Hot spots in the bee hive

Honeybee colonies (Apis mellifera) maintain temperatures of 35-36°C in their brood nest because the brood needs high and constant temperature conditions for optimal development. We show that incubation of the brood at the level of individual honeybees is done by worker bees performing a particular and not yet specified behaviour: such bees raise the brood temperature by pressing their warm thoraces firmly onto caps under which the pupae develop. The bees stay motionless in a characteristic posture and have significantly higher thoracic temperatures than bees not assuming this posture in the brood area. The surface of the brood caps against which warm bees had pressed their thorax were up to 3.2°C warmer than the surrounding area, confirming that effective thermal transfer had taken place.     

Abschätzung der Einträge von polyzyklischen aromatischen Kohlenwasserstoffen in deutsche Gewässer

Background, aim, and scope Polycyclic aromatic hydrocarbons (PAH) result from incomplete combustion of almost every organic materials, e.?g. due to forest fires, residential heating, combustion engines, grilling, or smoking. PAH are predominantly distributed over the air-path. Their usage in products (e.?g. moth-balls) has been limited strictly or completely forbidden in the past. In the context of the EU Water Framework Directive (WFD), the single substances anthracene, fluoranthene and naphthalene, as well as PAHs as group of substances, are listed as “priority” substances. Background of this work is a first compilation of sources of PAH emissions, and in this context, the collection of all relevant data and information to calculate the total emissions into surface waters in Germany. Materials and methods Within the scope of diverse research projects, funded by the German Environmental Agency, the available data material concerning PAH input in surface waters has been analyzed by the Fraunhofer Institute for Systems and Innovation Research. On the basis of the collected data, a first evaluation of relevance of the different sources has been conducted using the model MONERIS. Results As a result of the atmospheric deposition, PAHs enter, to a large extent, surface waters directly or indirectly through surface runoff (e.?g. urban areas, wastewater treatment plants, erosion). Discussion Although there is still additional research need for some of the covered PAH sources, a noticeable distribution pattern of relevance emerges. Conclusions The scenarios, based on the currently known sources, show that the implementation or the neglect of emission reduction measures in the field of diffuse air-borne PAHs are crucial for the further development of the deposition of PAHs in surface waters. More far-reaching studies are necessary, e.?g. concerning emissions from inland navigation/motor boats, the inhomogeneous source “products”, or the path “erosion”. Recommendations and perspectives According to the EU-WFD, all depositions, emissions and losses of “priority hazardous” classified substances, such as the group of PAHs, have to be stopped or gradually finished in the long term. Until the year 2015, environmental quality standards (EQS) have to be met for all “priority substances”. Presently, the EQS often are not completely fulfilled for many substances of the PAH group, including benzo(a)pyrene. Reduction measures are necessary within diverse areas, especially concerning diffuse atmospheric emissions (e.?g. “residential heating”).