Aerosol Number Concentrations during Kosa Events on Suburban Hills in Japan

Measurements of aerosol size-separated number concentrations were performed in March 2001 on the Tama Hills of Japan, located near regions of heavy industry. The concentrations of particles larger than 1.0 μ m in diameter dramatically increased during the Kosa phenomena on 6–8 and 18–24 March. The number concentrations of coarse particles (> 3.0 μm) showed distinct diurnal variations, especially during the Kosa events. Fine particles smaller than 0.5 μm increased when the relative humidity was high and the wind speed was low. On the other hand, the coarse particles concentrations were well correlated with wind speed and temperature. The dry deposition velocity of the coarse particles at the forest canopy was estimated from the nighttime decrease in the number concentrations.     

The mild hydrothermal synthesis of hydrogrossular from coal ash

In this study, an attempt was made to synthesize hydrogrossular, a group of garnet minerals, under hydrothermal conditions at temperatures below 180°C, using coal ash, which is the solid waste from thermal power plants, as a starting material. A single phase corresponding to hydrogrossular was found at around 120°C, and the hydrogrossular coexisted with 11-Å tobermorite above 140°C. The hydrogrossular phase decreased with increasing reaction temperature, while that of 11-Å tobermorite increased concurrently. The physicochemical properties of the hydrogrossular obtained from the hydrothermal synthesis was characterized by X-ray diffraction thermogravimetry/differential thermal, analysis, scanning electron microscopy, Fourier transform infrared spectroscopy, and X-ray fluorescence spectroscopy. Received: September 4, 2000 / Accepted: March 7, 2001     

Development of a novel hybrid microwave-heater reactor for paper-based waste treatment

It is necessary to develop a medical waste management system featuring nonburning treatment and safety functions for small medical institutions. In this article, the development of a waste management system without oxygen injection was achieved by means of hybrid heating using microwave energy and an electric heater. The shape of the microwave reactor was a rectangular parallelepiped with a volume of about 0.1 m³. In the experimental setup, microwave energy (2.45 GHz, about 800 W) was injected from the top of the reactor, while the heater (about 1 kW) was located at the bottom. Heat insulators were set into all the walls of the reactor. The gases generated in the system were vented through water and activated carbon. Five paper-based diapers with absorbed water were used as the waste sample. For the evaluation of performance, the reduction rate was defined as the ratio (in percent) of the weight before and after treatment. The reduction rate as a function of treatment time and the effect of the position of the waste in the reactor on the reduction rate and the uniformity of treatment were examined for about 3 kg of waste. It was found that the reduction rate reached as low as 4.2% at 3 h and then 3% after 8 h. The treated profile strongly depended on the position of the waste in the reactor. In particular, it was clarified that a metal cylindrical enclosure and a needle electrode played an important role in attaining uniform treatment of the waste.     

Historical trends in human dietary intakes of endosulfan and toxaphene in China, Korea and Japan

Recently, the Stockholm Convention prohibited the use of toxaphene and has been reviewing endosulfan. The historical use of these pesticides may contaminate food and tend to accumulate in the food chain. In this study, to evaluate the spatial and temporal trends of food contamination, the endosulfan and toxaphene levels were measured in pooled 24-h food composite samples from Chinese (n = 10), Korean (n = 10) and Japanese (n = 40) adults in the 1990s and 2007-2009. Endosulfan was detected in 32 of 40 samples from Japan, but its levels (sum of α- and β-isomers) were low in both the 1990s and 2009 (range as geometric mean (geometric standard deviation) [GM (GSD)]: 0.96 (1.6)-1.42 (1.4) ng kg⁻¹ d⁻¹). The dietary intakes of endosulfan in Seoul as GM (GSD) were 38.68 (1.3) ng kg bw⁻¹ d⁻¹ in 1994 and 92.17 (4.4) ng kg bw⁻¹ d⁻¹ in 2007, and significantly higher than those in Japan (p < 0.05). The samples from Beijing showed a 50-fold increase in the endosulfan levels from 1993 (GM: 0.58 ng kg⁻¹ d⁻¹) to 2009 (GM: 24.91 ng kg bw⁻¹ d⁻¹) (p < 0.05). Toxaphene was detected in 33 of 40 samples from Japan. The dietary intake of toxaphene in Japan (sum of Parlars #26, #50 and #62) was 0.32-1.21 ng kg bw⁻¹ d⁻¹ (range as geometric mean) and no temporal trend was observed. The dietary intake of toxaphene in Seoul increased significantly from 0.2 ng kg bw⁻¹ d⁻¹ (GM) in 1994 to 3.6 ng kg bw⁻¹ d⁻¹ (GM) in 2007 (p < 0.05). Only one of 10 pooled samples from Beijing contained a detectable level of toxaphene (0.3 ng kg bw⁻¹ d⁻¹). For the entire population, the risk of adverse health effects from dietary intakes of endosulfan and toxaphene is unlikely. However, the concentrations of endosulfan in several samples exceeded 10% of the acceptable daily intake limit value of 6 μg kg bw⁻¹ d⁻¹ set by the World Health Organization (WHO). It appears important to refine dietary intake estimates targeting food types and source identification to ensure safe food for consumers.     

Aerobic nitrogenase activity measured as acetylene reduction in the marine non-heterocystous cyanobacterium Trichodesmium spp. grown under artificial conditions

Aerobic nitrogenase activity in the marine non-heterocystous cyanobacterium Trichodesmium spp. NIBB 1067, isolated off the Izu Peninsula, Japan in 1983 and grown under artificial conditions, was assayed by the acetylene reduction method. This strain exhibited acetylene reduction activity under aerobic conditions when cells had been grown in the medium free of combined nitrogen. Activity was markedly enhanced by light, and dependent on the growth phase being higher during the exponential growth phase and lower during the late linear and stationary growth phases. Since typical colony formation occurred during the last growth phase, the present results contradict the idea that N₂-fixation depends on colony formation. The photosynthesis inhibitor DCMU at 10^-6 M inhibited light-dependent acetylene reduction completely. Acetylene reduction by Trichodesmium spp. was tolerant of O₂ as strongly as that in the heterocystous cyanobacteria. Even at a partial pressure of oxygen (p_{O 2}) of 3 atm, the activity still remained as high as half of the maximum. It was almost under anaerobic conditions. Maximum activity was obtained at pO₂ of ca. 0.1 atm.     

Optimal turning method of composting regarding hygienic safety

The new tuming method was proposed and verified its effectiveness to pathogens by laboratory scale experiments. Considering the results obtained from the previous studies, it could be said that tuming of a composting pile was essential in terms of hygienic aspects but the number of tuming should be minimized. Effectiveness of inactivation was estimated for each composting run. From this estimation,tuming by layers, which is different from conventional tuming that mixes compost pile entirely, was proposed and investigated its performance by experiments. Composting operations with static pile method, complete mix(conventional) tuming method, and proposed tuming( layer tuming) method were done and their effectiveness on inactivation of indicator microorganism was evaluated and compared.As results, the conventional tuming method was not a proper method in terms of pathogen inactivation, whereas, the proposed tuming method showed an excellent performance and should be employed in a composting operation.     

Suppressive effect of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and dioxin-like polychlorinated biphenyls transfer from feed to eggs of laying hens by activated carbon as feed additive

In this study, we investigated the suppressive effect of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and dioxin-like polychlorinated biphenyls (DL-PCBs) transfer from the feed to the eggs of laying hens by using activated carbon as a feed additive. Four groups of six hens (White Leghorn egg-layers; age, 11 weeks) were housed as two control groups and two exposure groups for a period of 20 weeks. Two control groups were fed with either the basal feed “Control” or basal feed additing activated carbon “Control + C”. Another two exposure groups were fed with feed contaminated (about 6 ng TEQ kg⁻¹ feed) by standard solutions of PCDDs/PCDFs and DL-PCBs “Exposure” alone and contaminated feed adding activated carbon “Exposure + C”. There was no significant effect on each groups for the growth rate, biochemical blood components, and egg production: these were around the standard levels for poultry in general. Moreover the results in this study showed the availability of activated carbon as a feed additive owing to the reduction in the risk of food pollution by PCDDs/PCDFs and DL-PCBs. The concentration in the eggs of the Exposure group gradually increased following the start of egg-laying but reached a steady state after about 1 month. In contrast, the concentration for the Exposure + C group was stationary and below the maximum EU level (6 pg TEQ g⁻¹ fat). In comparison to the Exposure group, the Exposure + C group showed a significant decline in the percentage of bioaccumulation into the egg. This reduction due to activated carbon was also observed in the muscle and abdominal fat. The reductions were compound- and congener-dependent for DL-PCBs as follows: PCDDs/PCDFs, non-ortho-PCBs, and mono-ortho-PCBs were more than 90%, 80%, and 50%, respectively, irrespective of the type of tissues. Fat soluble vitamin concentrations in the eggs of the Exposure + C group showed lower trends than the Exposure group. The γ-tocopherol and α-tocopherol concentrations in eggs of Exposure + C group showed a significant reduction of about 40%. However, the addition of activated carbon into animal feed could obviate the remote potential for accidents causing unintentional food pollution with PCDDs/PCDFs and DL-PCBs.     

Characterization of Solid-Phase Microextraction and Gas Chromatography for the Analysis of Gasoline Tracers in Different Microenvironments

Abstract

Gasoline tracers were collected on solid-phase microextraction (SPME) fibers and analyzed by capillary gas chromatography with photoionization detector (GC/PID). This was part of a larger study to quantify personal exposure to motor vehicle gasoline evaporative and combustive emissions in high-end exposure microenvironments (MEs). The SPME fiber selected for this application was a 75-µm carboxen/polydimethylsiloxane. Sequential 10-min samples were collected for measurement of benzene, toluene, ethylbenzene, and ortho-, meta-, and para-xylene in different MEs in Atlanta, GA, in summer 2002 and Reno, NV, in spring 2003. Field calibrations were performed with certified gas standards in 1-L Tedlar bags for varying concentrations and exposure times. SPME detection limits were ～0.2 ppbv with a precision of 3–17% and accuracy of 30%. A dynamic system was designed for temperature and relative humidity calibrations, with corrections for the effects of these variables performed when necessary. SPME data compared satisfactorily with integrated canister samples, continuous PID, and field portable mass spectrometer data.     

Characterization of solid-phase microextraction and gas chromatography for the analysis of gasoline tracers in different microenvironments

Gasoline tracers were collected on solid-phase microextraction (SPME) fibers and analyzed by capillary gas chromatography with photoionization detector (GC/PID). This was part of a larger study to quantify personal exposure to motor vehicle gasoline evaporative and combustive emissions in high-end exposure microenvironments (MEs). The SPME fiber selected for this application was a 75-microm carboxen/polydimethylsiloxane. Sequential 10-min samples were collected for measurement of benzene, toluene, ethylbenzene, and ortho-, meta-, and para-xylene in different MEs in Atlanta, GA, in summer 2002 and Reno, NV, in spring 2003. Field calibrations were performed with certified gas standards in 1-L Tedlar bags for varying concentrations and exposure times. SPME detection limits were approximately 0.2 ppbv with a precision of 3-17% and accuracy of 30%. A dynamic system was designed for temperature and relative humidity calibrations, with corrections for the effects of these variables performed when necessary. SPME data compared satisfactorily with integrated canister samples, continuous PID, and field portable mass spectrometer data.     

Evaluation of filter-based aerosol measurements during the 1987 Southern California Air Quality Study

The Southern California Air Quality Study (SCAQS) was conducted during the summer and fall of 1987 to assess the causes of elevated ozone and suspended particulate matter concentrations in California's South Coast Air Basin (SoCAB). Extensive gaseous (i.e. nitric acid, ammonia, sulfur dioxide) and particle (i.e. PM_2.5 and PM₁₀ mass, elements, ions, carbon) measurements were acquired for 11 days during the summer at nine locations, and six days during the fall at six locations. Outliers were identified so that they could be excluded from further statistical analyses. Carbon and elemental measurements were found to be negatively biased by 20% owing to inhomogenous aerosol deposits on the SCAQS filters and analysis methods which were applied to a portion of the filters. These biases seem relatively consistent, however, and should not affect conclusions drawn from data analysis efforts if they are appropriately considered. Significant fractions (30–60%) of ammonium nitrate volatilized during the summer when temperatures were higher. Less than 10% typically volatilized during the fall when temperatures were lower. Anion/cation balances support the accuracy and precision estimates of the nitrate, sulfate, and ammonium measurements. Coarse particle sulfate was generally low, while coarse particle nitrate was most pronounced at the coastal sites.This paper documents SCAQS filter-based aerosol measurement methods, and evaluates the accuracy, precision, and validity of the data set. Various comparisons were made for: (1) PM_2.5/PM₁₀ ratios for mass and major chemical species; (2) sum of chemical species versus measured mass; (3) sulfate versus sulfur ratios; (4) PM_2.5 particulate nitrate versus nitric acid-denuded nitrate; and (5) anion/cation balances. The measurement and evaluation techniques presented in this paper serve as a guideline for other data analysis and modeling studies.