Elemental composition of Jamaican foods 1: A survey of five food crop categories

The concentrations of 27 elements in Jamaican food categories consisting of fruit, legumes, leafy and root vegetables and other root crops are reported. The main analytical techniques used were neutron activation analysis and flame and graphite furnace atomic absorption spectrophotometry. The results are compared, where possible, with values from Denmark, the United Kingdom, the United States and Nigeria, and with some regulatory limits. Over 75% of the results for antimony, arsenic, barium, cerium, thorium and uranium were below the respective sample detection limits but even among these, some of the maximum values observed indicate that further examination may be useful for those foods grown in the regions of highest uptake and consumed in large amounts. The other elements reported are bromine, cadmium, calcium, caesium, cerium, chromium, copper, europium, hafnium, iron, lanthanum, lead, magnesium, manganese, phosphorus, potassium, rubidium, scandium, samarium, sodium, strontium, thorium, uranium, and zinc. Many of these elements occur at concentration levels above those reported from the other countries but it seems unlikely that most of these will contribute significantly to public health risk. However, at this stage cadmium clearly appears to be the element of greatest concern in the Jamaican food chain. The observed range of cadmium concentrations suggests that factors such as land selection, coupled perhaps where necessary, with suitably modified agricultural practices, is a feasible way to reduce the cadmium content of certain local foods.     

Monitoring of Benzene in Ambient Air with Organic Vapor Badges

The original Texas Intersection Model (TEXIN) for air quality near street intersections has been widely adopted across the nation. At the request of transportation agencies from several states, the TEXIN model was revised to improve its performance and flexibility. The new capabilities include T-intersections, one-way streets, four-way stops, inspection/maintenance capabilities, anti-tampering programs and a short-cut emissions algorithm. TEXIN2 uses the CMA procedures for estimating traffic flow parameters, MOBILE3 to determine free flowing traffic cruise emissions, and CALINE3 to model the pollutant distribution downwind of an intersection. The new model, TEXIN2, offers the user more accurate simulations with enhanced versatility while still requiring a minimal amount of input data.     

Associations between self-reported odour annoyance and volatile organic compounds in ‘Chemical Valley’, Sarnia, Ontario

Annoyance produced by air pollution has been suggested as a useful proxy for determining ambient air pollution exposure. However, most of the studies, to date, have focused on nitrogen dioxide and sulphur dioxide, with no work done on volatile organic compounds (VOC). This study is aimed at examining the associations between odour annoyance and VOC in ‘Chemical Valley’, Sarnia, Ontario, Canada. Annoyance scores were extracted from a community health survey (N?=?774), and exposures to VOC were estimated from respondents’ six-digit alphanumeric postal codes using land use regression models. Univariate analyses were used to explore the relationships between odour annoyance and modelled pollutants, whilst multivariate ordinal logistic regression was utilized to examine the determinants of odour annoyance. The results indicate that odour annoyance is significantly associated with modelled benzene, toluene, ethylbenzene, o-xylene and (m?+?p)?xylene (BTEX) pollutants. The findings also show that the determinants of odour annoyance in the context of VOC include gender, number of relatives in the community, perception of air pollution, community satisfaction, medical checkups, ability to cope with daily life demands and general symptoms. When compared, the analysis indicates that Sarnia residents respond to considerably lower BTEX concentrations than the allowable ‘safe’ levels in the province of Ontario. In general, the results exhibit a dose–response gradient with annoyance score increasing with rising modelled pollutant concentrations. The observed relationships suggest that odour annoyance might be a function of true exposure and may serve as a proxy for air quality and ambient air pollution monitoring. However, questionnaire-based odour annoyance scores need to be longitudinally validated across different geographical scales and pollutants if they are to be adopted at the national level.     

Measurements of ultrafine particles and other vehicular pollutants inside a mobile exposure system on Los Angeles freeways

A mobile exposure and air pollution measurement system was developed and used for on-freeway ultrafine particle health effects studies. A nine-passenger van was modified with a high-efficiency particulate air (HEPA) filtration system that can deliver filtered or unfiltered air to an exposure chamber inside the van. State-of-the-art instruments were used to measure concentration and size distribution of fine and ultrafine particles and the concentration of carbon monoxide (CO), black carbon (BC), particle-bound polycyclic aromatic hydrocarbons (PAHs), fine particulate matter (PM2.5) mass, and oxides of nitrogen (NOx) inside the exposure chamber. This paper presents the construction and technical details of the van and air pollutant concentrations collected in 32 2-hr runs on two major Los Angeles freeways, Interstate 405 (1-405; mostly gasoline traffic) and Interstate 710 (1-710; large proportion of heavy-duty diesel traffic). More than 97% of particles were removed when the flow through the filter box was switched from bypass mode to filter mode while the vehicle was driving on both freeways. The filtration system thus provides a great particulate matter exposure contrast while keeping gas-phase pollutant concentrations the same. Under bypass mode, average total particle number concentration observed inside the exposure chamber was around 8.4 x 10(4) and 1.3 x 10(5) particles cm(-3) on the I-405 and the I-710 freeways, respectively. Bimodal size distributions were consistent and similar for both freeways with the first mode around 16-20 nm and the second mode around 50-55 nm. BC and particle-bound PAH concentrations were more than two times greater on the I-710 than on the I-405 freeway. Very weak correlations were observed between total particle number concentrations and other vehicular pollutants on the freeways.     

A robust nonparametric method for quantifying undetected extinctions

How many species have gone extinct in modern times before being described by science? To answer this question, and thereby get a full assessment of humanity's impact on biodiversity, statistical methods that quantify undetected extinctions are required. Such methods have been developed recently, but they are limited by their reliance on parametric assumptions; specifically, they assume the pools of extant and undetected species decay exponentially, whereas real detection rates vary temporally with survey effort and real extinction rates vary with the waxing and waning of threatening processes. We devised a new, nonparametric method for estimating undetected extinctions. As inputs, the method requires only the first and last date at which each species in an ensemble was recorded. As outputs, the method provides estimates of the proportion of species that have gone extinct, detected, or undetected and, in the special case where the number of undetected extant species in the present day is assumed close to zero, of the absolute number of undetected extinct species. The main assumption of the method is that the per‐species extinction rate is independent of whether a species has been detected or not. We applied the method to the resident native bird fauna of Singapore. Of 195 recorded species, 58 (29.7%) have gone extinct in the last 200 years. Our method projected that an additional 9.6 species (95% CI 3.4, 19.8) have gone extinct without first being recorded, implying a true extinction rate of 33.0% (95% CI 31.0%, 36.2%). We provide R code for implementing our method. Because our method does not depend on strong assumptions, we expect it to be broadly useful for quantifying undetected extinctions.     

Introduction to the special issue on Advances in Life-Cycle Approachesto Business and Resource Management in the Asia-Pacific Region

This special issue of the Journal of Cleaner Production was initiated as a result of the 5th and 6th meetings of the Asia Pacific Roundtable for Sustainable Consumption and Production (APRSCP), which were held in Melbourne, Australia and Hanoi, Vietnam, respectively. A need identified at those meetings was to create another means of communicating the best ideas and papers being presented, to a wider audience. The Asia Pacific region has special development needs given its rapid emergence as a global production hub, but coupled to that are also the rapid social adjustments and shifts in patterns of consumption and production which aren't positive for the environment. This special issue contains eight papers covering the implementation of cleaner production and life cycle principles at the systems and regional planning level. These articles cover urban development, corporate CP programs, supply chain management, eco-industrial networks, and industrial parks, recycling, and understanding the role of human factors in bringing about environmental change.     

Aluminium and fluoride concentrations of three tea varieties growing at Lantau Island,Hong Kong

The present project aims to investigate aluminium (Al) and fluoride (F) contents in teas (Camellia sinensis (L.) O. Kuntze). Three different commercial tea varieties: Assam variety and two China sub-varieties, a large leafed variety and small leafed variety, were collected in two tea gardens of Lantau Island tea plantation of Hong Kong. In general, high concentrations of Al and F were accumulated in the mature leaves (15.3 and of 2.07 g kg^–1 respectively). Among the three varieties, the small leafed variety exhibited the highest Al and F contents followed by the large leafed variety whereas the Assam variety had the lowest Al and F concentrations in its tea bushes. Tea products from a plantation were also analysed and it was noted that black tea had higher Al and F concentrations than green tea. The amount of Al and F released into tea liquor was also tested and the results showed that higher concentrations of Al and F were released into tea liquor under repeated infusion method than continuous infusion method.