Performance of an in situ passive sampling system for metals in stormwater

A passive sampler has been developed and is demonstrated in situ for urban runoff. The passive sampler is compared to conventional composite (time-dependent and flow-weighted) bottle sampling during and between storm events. The sampling was carried out at established stormwater stations; before and after a stormwater detention pond. In situ deployment of the passive sampler provides the metal concentrations, corresponding to the electrochemically available fraction of total metal, for time-dependent samples collected in parallel. The sampler provides improved accuracy compared to bottle sampling because contamination during sample transport and handling is minimised. Laboratory handling is reduced by direct analysis of the accumulated metals on the receiving membrane by laser ablation inductively coupled plasma mass spectrometry. Passive sampling also solves the problem of metal speciation change during transport to the laboratory, which is a potential problem for bottle samples. The low cost and convenience of the passive sampler and subsequent analysis should allow significantly more extensive spatial and temporal monitoring of metals in the aquatic environment than has previously been possible.     

产业联盟透视 关于中外产业联盟问题的10个答问

国内外产业联盟的形成和发展,原因在于经济全球化、高新技术特别是信息技术的快速发展。联盟按照自愿、平等、互利原则建立,这种组织形式有利于成员间的资源整合,有利于新技术的研发、统一标准、开拓全球市场,使联盟成员在市场竞争中获得更多的优势。联盟的发展需要有明确的定位,坚持战略性、市场化、互利性原则。目前安防行业成立的产业联盟,本质上是企业联盟。在企业家探索、实践产业联盟之际,我们对产业联盟的来龙去脉、对联盟的定位和功能进行了梳理,目的是抛砖引玉,希望大家对产业联盟、企业联盟有一个相对全面、直观的解读。     

Source characterisation of atmospheric platinum group element deposition into an ombrotrophic peat bog

Platinum, palladium, rhodium, iridium and osmium were found to be enriched relative to their expected natural concentrations in peat samples from Thoreau's Bog, an ombrotrophic peat bog in Concord, Massachusetts. The source of osmium into the bog was determined from its isotopic composition (187Os/188Os). Osmium is composed of 4% lithogenic osmium from atmospheric soil dust, 41% of anthropogenic osmium and 55% of osmium from a non-lithogenic, non anthropogenic source, with rain being a likely candidate for the latter. Significant anthropogenic and rain contributions are also expected for iridium. In contrast, platinum, palladium and rhodium are almost exclusively anthropogenic. The larger enrichments of platinum, palladium and rhodium indicate that automobile catalysts are the source of platinum group elements to Thoreau's bog. The bog is located approximately 300 m from a major road and, therefore, the occurrence of platinum elements is evidence for regional dispersion of these metals. The absence of a clear trend following the introduction of catalysts indicates that platinum group elements are not quantitatively conserved in peat with downward leaching and plants playing an important role in the accumulation of platinum group elements.     

Effect of High Content of Deinking Paper Sludge (DPS) on the Reinforcement of HDPE

Deinking paper sludge (DPS)/high density polyethylene (HDPE) composites with and without coupling agent (3 % of maleated polyethylene (MAPE)) were manufactured by twin-screw extrusion followed by injection molding with high percentages of DPS (0, 20, 30 and 40 %). The effects of DPS content and MAPE on the mechanical, thermal, and morphological properties of the DPS/HDPE composites were investigated. Increasing DPS content in composites increased the tensile and flexural modulus (E; MOE), tensile and flexural strength (Rm; MOR), while decreased elongation at break and Un-notched impact resistance due to a poor adhesion between the DPS and HDPE. The addition of DPS also improved the thermal stability and increased the composites crystallinity. High content of DPS (40 %) and 3 % MAPE achieved good interfacial adhesion between fibres of DPS and HDPE. Therefore, an increase is observed for Rm, MOR, ductility, and impact toughness.     

Atmospheric photochemistry and secondary aerosol formation of urban air in Lyon, France

Photochemical aging of volatile organic compounds (VOCs) in the atmosphere is an important source of secondary organic aerosol (SOA). To evaluate the formation potential of SOA at an urban site in Lyon (France), an outdoor experiment using a Potential Aerosol Mass (PAM) oxidation flow reactor (OFR) was conducted throughout entire days during January-February 2017. Diurnal variation of SOA formations and their correlation with OH radical exposure (OHexp), ambient pollutants (VOCs and particulate matters, PM), Relative Humidity (RH), and temperature were explored in this study. Ambient urban air was exposed to high concentration of OH radicals with OHexp in range of (0.2–1.2)×10¹² molecule/(cm³?sec), corresponding to several days to weeks of equivalent atmospheric photochemical aging. The results informed that urban air at Lyon has high potency to contribute to SOA, and these SOA productions were favored from OH radical photochemical oxidation rather than via ozonolysis. Maximum SOA formation (36 µg/m³) was obtained at OHexp of about 7.4 × 10¹¹molecule/(cm³?sec), equivalent to approximately 5 days of atmospheric oxidation. The correlation between SOA formation and ambient environment conditions (RH & temperature, VOCs and PM) was observed. It was the first time to estimate SOA formation potential from ambient air over a long period in urban environment of Lyon.     

Discussion of “Tang,H., Zhang,H., & Yuan,S. (2018). Hydrodynamics and contaminant transport on a degraded bed at a 90-degree channel confluence. Environmental Fluid Mechanics, 18(2), 443–463”

The authors measured and computed the hydrodynamics and passive scalar dispersion in 90-degree open channel confluences over flat and degraded beds with a dominant upstream or tributary inflow. The present discussion essentially deals with the direction of rotation of the secondary currents, reported for the flat bed configuration with dominant tributary inflow. This rotation direction is indeed surprisingly opposite to the ones reported in the literature, both from calculations and measurements, even if present geometry slightly differs from literature geometries.     

Modelling spatial patterns of correlations between concentrations of heavy metals in mosses and atmospheric deposition in 2010 across Europe

Background

This paper aims to investigate the correlations between the concentrations of nine heavy metals in moss and atmospheric deposition within ecological land classes covering Europe. Additionally, it is examined to what extent the statistical relations are affected by the land use around the moss sampling sites. Based on moss data collected in 2010/2011 throughout Europe and data on total atmospheric deposition modelled by two chemical transport models (EMEP MSC-E, LOTOS-EUROS), correlation coefficients between concentrations of heavy metals in moss and in modelled atmospheric deposition were specified for spatial subsamples defined by ecological land classes of Europe (ELCE) as a spatial reference system. Linear discriminant analysis (LDA) and logistic regression (LR) were then used to separate moss sampling sites regarding their contribution to the strength of correlation considering the areal percentage of urban, agricultural and forestry land use around the sampling location. After verification LDA models by LR, LDA models were used to transform spatial information on the land use to maps of potential correlation levels, applicable for future network planning in the European Moss Survey.

Results

Correlations between concentrations of heavy metals in moss and in modelled atmospheric deposition were found to be specific for elements and ELCE units. Land use around the sampling sites mainly influences the correlation level. Small radiuses around the sampling sites examined (5 km) are more relevant for Cd, Cu, Ni, and Zn, while the areal percentage of urban and agricultural land use within large radiuses (75–100 km) is more relevant for As, Cr, Hg, Pb, and V. Most valid LDA models pattern with error rates of <?40% were found for As, Cr, Cu, Hg, Pb, and V. Land use-dependent predictions of spatial patterns split up Europe into investigation areas revealing potentially high (=?above-average) or low (=?below-average) correlation coefficients.

Conclusions

LDA is an eligible method identifying and ranking boundary conditions of correlations between atmospheric deposition and respective concentrations of heavy metals in moss and related mapping considering the influence of the land use around moss sampling sites.

     

Halogen-specific total organic halogen analysis: Assessment by recovery of total bromine

Determination of halogen-specific total organic halogen(TOX) is vital for studies of disinfection of waters containing bromide, since total organic bromine(TOBr) is likely to be more problematic than total organic chlorine. Here, we present further halogen-specific TOX method optimisation and validation, focusing on measurement of TOBr. The optimised halogen-specific TOX method was validated based on the recovery of model compounds covering different classes of disinfection by-products(haloacetic acids, haloacetonitriles,halophenols and halogenated benzenes) and the recovery of total bromine(mass balance of TOBr and bromide concentrations) during disinfection of waters containing dissolved organic matter and bromide. The validation of a halogen-specific TOX method based on the mass balance of total bromine has not previously been reported. Very good recoveries of organic halogen from all model compounds were obtained, indicating high or complete conversion of all organic halogen in the model compound solution through to halide in the absorber solution for ion chromatography analysis. The method was also successfully applied to monitor conversion of bromide to TOBr in a groundwater treatment plant. An excellent recovery(101%)of total bromine was observed from the raw water to the post-chlorination stage. Excellent recoveries of total bromine(92%–95%) were also obtained from chlorination of a synthetic water containing dissolved organic matter and bromide, demonstrating the validity of the halogen-specific TOX method for TOBr measurement. The halogen-specific TOX method is an important tool to monitor and better understand the formation of halogenated organic compounds, in particular brominated organic compounds, in drinking water systems.