Identification and assessment of water pollution as a consequence of a leachate plume migration from a municipal landfill site (Tucumán,Argentina)

Landfills constitute potential sources of different pollutants that could generate human health and environmental problems. While some landfills currently work under the protection of a bottom liner with leachate collection, it was demonstrated that migration could take place even yet with these cautions. The purpose of this paper is to assess the pollution caused by a leachate plume from a municipal landfill that is affecting both groundwater and surface waters. The research was carried out at Pacará Pintado landfill in northwestern Argentina. Analysis of water samples indicates that leachate is affecting groundwater under the landfill area and an abandoned river channel hydraulically connected. In the center of the landfill area, the plume is anoxic and sulfate, nitrate, iron and manganese reduction zones were identified. Leachate plume presented high concentration of organic matter, Fe, Mn, NH₄ ⁺, Cl^? and Cr reaching an extension of 900 m. The presence of a leachate plume in a landfill site with a single liner system implies that the use of this groundwater pollution control method alone is not enough especially if permeable sediments are present below.     

Metals in the sediment and liver of four fish species from different trophic levels in Tisza River,Serbia

In aquatic environments metals originate from various natural and anthropogenic sources. The degree of contamination in fish tissues depends on the pollutant, fish species, their mode of feeding, sampling site and trophic level. This study presents concentrations of Al, As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Se, Sr and Zn in sediment and liver of four ecologically different fish species: piscivorous northern pike (Esox lucius L.), benthivorous sterlet (Acipenser ruthenus L.) and silver bream (Brama brama L.), and omnivorous common carp (Cyprinus carpio L.). Fish were caught at four sites along the stretch of the River Tisza in Serbia during October 2010. The concentrations of metals have been assessed using the inductively coupled plasma – optical emission spectrometry. Results revealed that metals with the highest values in sediment and fish samples were Al and Fe, respectively and sometimes concentrations of Zn are in the same order of magnitude as Fe concentrations. The highest concentration of metals was recorded in omnivorous common carp.     

Spatio-temporal log-Gaussian Cox processes for modelling wildfire occurrence: the case of Catalonia, 1994–2008

Wildfires have become one of the principal environmental problems in the Mediterranean basin. While fire plays an important role in most terrestrial plant ecosystems, the potential hazard that it represents for human lives and property has led to the application of fire exclusion policies that, in the long term, have caused severe damage, mainly due to the increase of fuel loadings in forested areas, in some forest systems. The lack of an easy solution to forest fire management highlights the importance of preventive tasks. The observed spatio-temporal pattern of wildfire occurrences may be idealized as a realization of some stochastic process. In particular, we may use a space–time point pattern approach for the analysis and inference process. We studied wildfires in Catalonia, a region in the north-east of the Iberian Peninsula, and we analyzed the spatio-temporal patterns produced by those wildfire incidences by considering the influence of covariates on trends in the intensity of wildfire locations. A total of 3,166 wildfires from 1994–2008 have been recorded. We specified spatio-temporal log-Gaussian Cox process models. Models were estimated using Bayesian inference for Gaussian Markov Random Field through the integrated nested Laplace approximation algorithm. The results of our analysis have provided statistical evidence that areas closer to humans have more human induced wildfires, areas farther have more naturally occurring wildfires. We believe the methods presented in this paper may contribute to the prevention and management of those wildfires which are not random in space or time.     

Characterization and Release Kinetics of Allylthiosufinate and its Transforments from Poly(d,l-Lactide) Microspheres

In this work was described poly(d,l-lactide) microwave synthesis using tin(II) 2-ethylhexanoate initiated ring-opening polymerization. Polymerization was performed at 100 °C with monomer to initiator molar ratio ([M]/[I]) of 5,000 in 30 min. The achieved number average molar mass of obtained polymers (determined by gel permeation chromatography) was 102,320 g/mol, with the polydispersion index, Q, 2.80. Structural characterization was performed by FT-IR spectroscopy followed characteristic bands. For applicative purposes the obtained polymer was purified during the procedure of microsphere preparation. Biodegradable microspheres prepared from poly(d,l-lactide) have been widely studied in recent years and have become well established controlled drug delivery systems. In this work microspheres were loaded with allyl thiosulfinate (allicin) and its transforments products (ajoene and vinyldithiine), as pharmacological active substances. The morphology of the microspheres was analyzed using a scanning electron microscope. Allicin was synthesized by acid oxidation of allyl disufide and purification of obtained products by liquid–liquid extraction with diethyl ether. Obtained allicin, purity 73%, was transformed using microwave in acetone solution, at solvent boiling temperature, for 5 min. For the quality and quantity analysis of allicin and its transformation process was used LC/MS chromatography. (E)- and (Z)-ajoene were detected at retention time 3.1 and 3.3 min, respectively, whence 3-vynil-4H-1,2-dithiine and 2-vynil-4H-1,3-dithiine were detected at 4.3 and 4.8 min, respectively. Retention time of allicin was 2.93 min, according to liquid chromatography results. HPLC method was used for assessment of pharmaceutical substances (alicine and alicine transforments) releasing from microspheres at room temperature in solutions with different pH (pH = 3 and pH = 8) for 24 h.     

PET from Used Beverage Bottles: A Material for Preparation of Biologically Degradable Copolyesters

Poly(ethylene terephthalate) from used colorless beverage bottles was solvolyzed by ethane-1,2-diol. Hydroxyl end-groups present in the mixture of polyols formed were used to initiate the polymerization of ??-caprolactone (CLO) at 190?°C. Polycondensation (190?°C) of the reaction mixture containing an equilibrium amount of lactone corresponding to the reaction temperature yield an aliphatic?Caromatic copolyester. A variety of copolyesters containing 20?C60?mol. % CLO structural units was prepared. The microstructure of their macromolecules was analyzed using ¹H?NMR spectroscopy. Copolyesters were characterized by thermal analysis and tensile tests and their biodegradation potential was checked by the composting test.     

Effect of aeration rate and moisture content on the emissions of selected VOCs during municipal solid waste composting

The influence of the industrial control composting conditions (aeration 0.005–0.300?L_air?kg^?1 and moisture 40–70?%) of municipal solid waste on the composition of the selected compound emitted (limonene, β-pinene, 2-butanone, undecane, phenol, toluene, dimethyl sulfide, dimethyl disulfide) was studied. The highest emissions of volatile organic compounds (VOCs) were observed in the early stages of the processes. At the end of the process, low concentrations of the emitted compounds were found. Aeration rate had a strong effect on emissions. High aeration rate (0.300?L_air?kg^?1?min^?1) caused normally high emissions of all selected compounds whereas low aeration rates (0.05?L_air?kg^?1?min^?1) could cause anaerobiosis problems and generation of organic sulphur compounds. We observed that the effect of the moisture upon the emitted concentrations varied depending on the studied compound.     

Employment of passive sampling in monitoring indoor air quality in selected residences in a Tri-city area in Poland

Time-weighted average concentrations of selected volatile compounds were measured in chosen residences in a Tri-City area of Poland by means of passive sampling. The results were compared to those obtained by dynamic technique – sorption tubes filled with Tenax TA sorbent. Results obtained by employing the two techniques were similar. Total volatile organic compound (TVOC) parameters were also determined. An attempt was also made to evaluate the influence of outdoor air pollutants on indoor air quality.     

Photosynthetic sulfur bacteria from Zimapan Reservoir (Mexico): Seasonal variations and toxic effects of zinc in a microcosm system

Photosynthetic sulfur bacteria oxidize the sulfide produced by dissimilatory sulfate-reducing bacteria, thus preventing the occurrence of pollution by these compounds in the oxygenic zone of aquatic systems. Zinc is one of the most abundant heavy metals. Its toxic effects have been documented in various organisms that can photosynthesize, but a lack of information prevails in this respect, about photosynthetic sulfur bacteria. The aim of the present study was to evaluate the toxic effects of zinc on green sulfur bacteria (Chlorobiaceae) and purple sulfur bacteria (Chromatiaceae) in a microcosm as well to explore the possible relationships between the bacterial population growths with the physicochemical properties of the metalimnion of Zimapan Reservoir (Mexico) during a 1-year period. Hydrosoluble organic carbon (HOC) and light availability in the metalimnion were the limiting factors for growth in these bacteria. Higher HOC levels occurred in Spring, at the end of the wet season and in Winter. Current zinc levels in the reservoir seem to elicit toxic effects. At lethal zinc concentrations, the best concentration-response relationship was shown. The biomarker for purple sulfur bacteria was the bacteriochlorophyll content, while total reducing sugar was the best biomarker for green sulfur bacteria. At sublethal concentrations, zinc alters adenosine triphosphate levels, total reducing sugar, total protein content, and bacteriochlorophyll content. The observed responses indicate that green sulfur bacteria are more sensitive than purple sulfur bacteria and are suitable target organisms for use in establishing the accepted threshold concentration of zinc (NOEC 0.056–0.097 mg L^?1 of Zn) in anoxic deep water.     

Analysis of the toxicity of glyphosate and Faena® using the freshwater invertebrates Daphnia magna and Lecane quadridentata

With the present contribution an evaluation of the toxicity of the pure herbicide glyphosate and its commercial formulation Faena® is reported using the cladoceran Daphnia magna Strauss and the rotifer Lecane quadridentata Ehrenberg. LC₅₀, EC₅₀, NOEC, and LOEC values for each toxicant and for both test organisms are obtained. Regarding acute toxicity, Faena was 11-fold more toxic to L. quadridentata than pure glyphosate and slightly more toxic to D. magna (1.7-fold). Inhibition of esterase activity in L. quadridentata by glyphosate was the most sensitive end-point; the EC₅₀ was 1500-fold smaller than the LC₅₀. The implications of these results and their comparison with established international and national limit values for glyphosate are discussed.     

Study of sorptive properties of trap systems for selective enrichment of volatile organic compounds from tobacco smoke samples

There is a dearth of data on the consumer product concentrations of iron, lead, and nickel for accurate comparison to be made. The levels of these elements were determined in 85 samples of six different classes of personal care products commonly used in Nigeria using atomic absorption spectrophotometry. The results of the analysis showed that the range of the mean concentrations of Fe was 0.485–1.108 ppm, Pb ND–0.163 ppm, and Ni ND-0.160 ppm. The analytical data have demonstrated that the selected consumer products are possible sources of iron, lead, and nickel exposure. Users can be exposed to these metals directly through dermal contact or inhalation. The regulations relating to cosmetic products give no limit values for heavy metals in cosmetic products, hence, it was difficult to establish if the values obtained in this study are safe or not. Prolonged use of soaps, creams, and detergent containing these elements may pose threat to human health and the environment. This could be responsible for various skin diseases such as allergic skin, follicular and pigmentary disorders, which are common among the users (exposed groups) of these products in Nigeria. A body of evidence has presented a rare example of systemic allergic dermatitis caused by topical application of a mercury-containing cosmetic to the upper lip of a 32-year-old Turkish patient.