Organochlorine compounds in soils and sediments of the mountain Andean Lakes

Semi-volatile organochlorine compounds (OC) were analyzed in remote Andean soils and lake sediments. The sampling sites covered a wide latitudinal gradient from 18 degrees S to 46 degrees S along Chile and an altitudinal gradient (10-4500 m). The concentrations were in the order of background levels, involving absence of major pollution sources in the high mountain areas. Significant correlations were found between log-transformed concentrations of hexachlorobenzene, alpha- and gamma-hexachlorocyclohexane in soils and total organic content (TOC). In addition, TOC-normalized concentrations of the most volatile OC showed a significant linear dependence with air temperature. This good agreement points to temperature as a significant factor for the retention of long range transported OC in remote ecosystems such as the Andean mountains, although other variables should not be totally excluded. The highest concentrations of OCs were achieved in the sites located at highest altitude and lowest temperature of the dataset.     

Kinetics of photodegradation and ozonation of pentachlorophenol

The oxidation of 2,3,4,5,6-pentachlorophenol (PCP) has been carried out by a photodecomposition process using a polychromatic UV irradiation, and by an ozonation process. In the photodegradation process, the pH accelerated the decomposition rate and the approximate first-order rate constants were evaluated, with values between 0.16+/-0.005 min(-1) at pH=3 and 0.26+/-0.007 min(-1) at pH=9. A more rigorous kinetic study led to the determination of the quantum yields of the reaction, with values of 200+/-7x10(-3) mol/Eins for pH=3 and 22+/-1.1x10(-3) mol/Eins for pH=9. In the ozonation process, the rate constants for the reaction between ozone and PCP were determined by means of a competition kinetics, with values in the range from 0.67x10(5) to 314x10(5) l/mols. The specific rate constants for the un-dissociated and dissociated forms of PCP were also calculated. Finally, in both processes, the intermediate reaction products were identified, the most important being tetrachlorocatechol, tetrachlorohydroquinone and tetra-p-chlorobenzoquinone. Free chloride ion released, which was favored at high pHs, was also followed in both processes.     

Lesions induced by 2,4-D and chlorpyrifos in tench (Tinca tinca L.): implication in toxicity studies

This study was undertaken to demonstrate the toxicity of two pesticides, chlorpyrifos (O,O-diethyl 0-3,5,6-trichloro-2-pyridyl phosphorothioate) and 2,4-D (Dichlorophenoxyacetic acid) to tench (Tinca tinca Linnaeus). Pathological samples of damaged tench kidney showing lesions were taken for statistical analysis in order to quantify different parameters. Analysis revealed differences in the action and/or action time of the two pesticides. These differences were more acute in the case of 2,4-D thereby indicating a greater toxicity. These differences, expressed by mathematical formulae of numerical variables, would enable, a priori, the identification of the responsible pesticide and the time of acting in new natural cases of poisonings with these substances.     

Carbonyls in the metropolitan area of Mexico City: calculation of the total photolytic rate constants Kp(s(-1)) and photolytic lifetime (tau) of ambient formaldehyde and acetaldehyde

A great number of studies on the ambient levels of formaldehyde and other carbonyls in the urban rural and maritime atmospheres have been published because of their chemical and toxicological characteristics, and adverse health effects. Due to their toxicological effects, it was considered necessary to measure these compounds at different sites in the metropolitan area of Mexico City, and to calculate the total rate of photolytic constants and the photolytic lifetime of formaldehyde and acetaldehyde. Four sites were chosen. Sampling was carried out at different seasons and atmospheric conditions. The results indicated that formaldehyde was the most abundant carbonyl, followed by acetone and acetaldehyde. Data sets obtained from the 4 sites were chosen to calculate the total rate of photolysis and the photolytic lifetime for formaldehyde and acetaldehyde. Maximum photolytic rate values were obtained at the maximum actinic fluxes, as was to be expected.     

Influence of the application of sewage sludge on the degradation of pesticides in the soil

A study was made of the influence of the application of sewage sludge on the degradation of pesticides in the soil. Two kinds of sludge were used, with different characteristics, one from an urban treatment plant and one from a food processing plant. Three organophosphorus insecticides, fenitrothion, diazinon and dimethoate, were studied. The relative importance was determined of the chemical and biological degradation processes, which involved experiments on soil and sterile soil samples. A comparative study was also made of the degradation of pesticide residues and the evolution of the microbial population. The application of sludge seems to have a complex effect on the degradation of pesticides, determined by the bioavailability and biodegradability of their active ingredient. The biodegradation of pesticide residues brings about alterations in the microorganism population of the soil.     

Simultaneous estimation of effective and apparent diffusion coefficients in compacted bentonite

Effective diffusion coefficients (D(e)) are usually measured by means of "through-diffusion" experiments in which steady state is reached, and the "time-lag" methods are used to estimate the apparent diffusion coefficient (D(a)). For sorbing radionuclides (as caesium), the time needed to reach steady-state conditions is very large, and the precision in D(a) determinations is not satisfactory. In this paper, a method that allows determining simultaneously effective and apparent diffusion coefficients in compacted bentonite without reaching steady-state conditions is described. Basically, this method consists of an "in-diffusion" experiment in which the concentration profile in the bentonite sample is used to estimate D(a), and the temporal evolution of the solute concentration in the reservoir is used to estimate D(e). This method has several advantages over the typical "through-diffusion" experiments, in particular: (a) experiment duration is significantly shorter, (b) D(a) values are measured with greater precision and (c) it is not necessary to maintain a constant solute concentration in the reservoir. This new method has been used to estimate the effective and apparent diffusion coefficients for caesium in FEBEX bentonite and in order to validate it, the results have been compared with results previously obtained with standard methods. Experimental results have been satisfactorily modelled using a simple model of diffusion in porewater and the measured value of D(e)(Cs) is very similar to D(e)(HTO) in the same bentonite. There is no evidence of "surface diffusion" in FEBEX bentonite for caesium.     

Toxic by-products from the combustion of Kraft lignin

Lignin samples, sub-product in the Kraft process of cellulose from eucalyptus wood, were burnt in a laboratory scale furnace at different residence temperatures and with distinct fuel-rich atmospheres. The yields of CO, CO(2), eight light hydrocarbons (methane, ethylene, ethane, propylene, acetylene, butane, etc.) and 60 semi-volatile+volatile compounds (benzene, toluene, ethylbenzene, styrene, indene, naphthalene, dibenzofuran, phenanthrene, chrysene, etc.) were determined, with nominal reactor temperatures between 800 and 1100 degrees C and residence times of the volatiles evolved and formed between 4 and 7 s. The collection of the gases and volatiles evolved was carried out with a Tedlar bag and by XAD-4 resin respectively, comparing the data obtained in both cases. The emission factor (mg/kg) of the CO was between 2500 and 90000, and under the poor-oxygen atmosphere, the emission factors of many by-toxic products were greater than 100 mg/kg. A pyrolysis run was also performed, obtaining emission factors between 30 and 3000 mg/kg, facilitating its identification. The behaviour of different compounds in the combustion runs was discussed considering three groups in accordance with their stability vs. oxygen, and two groups vs. temperature.     

Oxidation of methane over palladium catalysts: effect of the support

This work is focused on the deep catalytic oxidation of methane over supported palladium catalysts. The influences of the metal loading, oxidation state of palladium, nature of supports, presence of promoters in the supports (for zirconia-based supports), and thermal stability have been studied experimentally. Catalysts were prepared by incipient wetness of commercially available supports with aqueous solutions of palladium nitrate. For gamma-alumina support, it was observed that the optimal amount of palladium is between 0.5% and 2%, with higher amounts leading to a loss in specific activity. Concerning the oxidation state of the catalyst, it is concluded that for all the supports tested in the present work, a reduction of the catalyst is not needed, yielding the same conversion at steady state catalysts reduced and oxidised. The thermal stability of various supported catalysts were also studied, zirconia supports being the most active. These supports, specially Y-modified zirconia support, do not suffer appreciable deactivation below 500 degrees C.     

Rapid regional recovery from sulfate and nitrate pollution in streams of the western Czech Republic--comparison to other recovering areas

Hydrochemical changes between 1991 and 2001 were assessed based on two synoptic stream surveys from the 820-km2 region of the Slavkov Forest and surrounding area, western Czech Republic. Marked declines of sulfate, nitrate, chloride, calcium and magnesium in surface waters were compared with other areas of Europe and North America recovering from acidification. Declines of sulfate concentration in the Slavkov Forest (-30 microeq L(-1) yr(-1)) were more dramatic than declines reported from other sites. However, these dramatic declines of strong acid anions did not generate a widespread increase of stream water pH in the Slavkov Forest. Only the most acidic streams experienced a slight increase of pH by 0.5 unit. An unexpected decline of stream water pH occurred in slightly alkaline streams.     

Comparison of supercritical fluid extraction and Soxhlet extraction for the determination of PCBs in seaweed samples

The efficiency of supercritical fluid extraction for the determination of 12 polychlorinated biphenyls from algae samples is compared to Soxhlet extraction. Analytical detection limits for the individual congeners ranged from 0.62 microgl(-1) to 19 microgl(-1). Recovery was tested for both methods using standard addition procedure. At maximum spike level of concentration, the mean recoveries were not significantly different (P>0.05) of all PCBs studied, with the exception of PCBs 28, 52, 77 and 169. Method precision for Soxhlet extraction (< or =3.9%) was slightly better than for SFE (< or =9.2%). Although both methods yield comparable results, SFE offers the advantage of detecting all PCBs studied at lower concentrations, reducing extraction time, and reducing the amount of solvents needed. The optimized methods were applied to the analysis of three real seaweed samples, except for PCB101 the concentrations of all PCBs were low or below the detection limits. The levels of PCB101 found in sample 1 were 6.6+/-0.54 ng g(-1) d.w., in sample 2 the levels were 8.2+/-0.86 ng g(-1) d.w. and in sample 3 they were 7.7+/-0.08 ng g(-1) d.w.