A hybrid model for robust design of sustainable closed-loop supply chain in lead-acid battery industry

Environmental Science and Pollution Research - Considering supply chain efficiency during the network design process significantly affect chain performance improvement. In this paper, the design...     

Spatial analysis of resources and environmental carrying capacity in Iran

Urbanization and mass movement of the population from rural areas and small cities to megacities have led to environmental, economic, and social problems in Iran. In dealing with these challenges, assessing resource and environmental carrying capacity (RECC) is considered an effective method to leverage space and capital to achieve sustainable development. This study aimed to rank the provincial RECC in Iran. Toward this purpose, environmental indices were generated from remotely sensed and statistical census data. Then, the provinces were scored in terms of environmental, economic, and infrastructural carrying capacities, and RECC using the mean variance analysis method. Results demonstrated that in most areas, there is no relationship between economic and infrastructural capacities and development. Statistically, a correlation coefficient of −0.53 between economic and environmental carrying capacities indicated excessive use of environmental capacities. Moreover, the spatial distribution pattern of environmental, economic, and infrastructural carrying capacity was entirely heterogeneous between the provinces; there was a northeast–southwest pattern in terms of infrastructural capacity and an economic pattern from north to south. The distribution pattern of RECC is most consistent with the environmental capacity, pointing at the high weight of the indicators of the RECC model. In conclusion, this research offers a new vision for policymakers and provides a theoretical and applicable framework for implementing sustainable strategies in land-use planning. It is recommended that the RECC concept and tools can be used not only for planning but also for measuring the efficiency of spatial development programs and establishing land balances in the region.     

A review of combinations of electrokinetic applications

Anthropogenic activities contaminate many lands and underground waters with dangerous materials. Although polluted soils occupy small parts of the land, the risk they pose to plants, animals, humans, and groundwater is too high. Remediation technologies have been used for many years in order to mitigate pollution or remove pollutants from soils. However, there are some deficiencies in the remediation in complex site conditions such as low permeability and complex composition of some clays or heterogeneous subsurface conditions. Electrokinetic is an effective method in which electrodes are embedded in polluted soil, usually vertically but in some cases horizontally, and a low direct current voltage gradient is applied between the electrodes. The electric gradient initiates movement of contaminants by electromigration (charged chemical movement), electro-osmosis (movement of fluid), electrolysis (chemical reactions due to the electric field), and diffusion. However, sites that are contaminated with heavy metals or mixed contaminants (e.g. a combination of organic compounds with heavy metals and/or radionuclides) are difficult to remediate. There is no technology that can achieve the best results, but combining electrokinetic with other remediation methods, such as bioremediation and geosynthetics, promises to be the most effective method so far. This review focuses on the factors that affect electrokinetic remediation and the state-of-the-art methods that can be combined with electrokinetic.     

Spatial and temporal variability of fluoride concentrations in groundwater resources of Larestan and Gerash regions in Iran from 2003 to 2010

Environmental Geochemistry and Health - There is discrepancy about intervals of fluoride monitoring in groundwater resources by Iranian authorities. Spatial and temporal variability of fluoride in...     

Oxidized multiwalled carbon nanotubes modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole for solid phase extraction and preconcentration of some metal ions

In this work, a new procedure for the enrichment of the trace amount of Cu²⁺, Ni²⁺, Co²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions based on the utilization of multiwalled carbon nanotubes (MWCNT) modified with 2-(2-hydroxy-5-nitrophenyl)-4,5-diphenyl imidazole as chelating agent prior to their determination by flame atomic absorption spectrometry has been described. The influence of effective parameters including pH, amount of ligand and MWCNT, composition of eluent, and coexisting ions on recoveries of understudy metal ions was examined. At the optimum pH of 5.0, all metal ions were quantitatively sorbed onto the proposed solid phase and completely desorbed with 8?mL of 5.0?mol?L^?1 HNO₃. The detection limit of Cu²⁺, Co²⁺, Ni²⁺, Pb²⁺, Fe²⁺, and Zn²⁺ ions was 1.7, 2.4, 2.3, 2.9, 2.8, and 1.4?µg?L^?1, while the preconcentration factor was 63 for Cu²⁺ and 94 for the other metal ions and relative standard deviations between 1.8 less than 3.0%. The proposed procedure was applied for the analysis of various samples.     

Interaction of selenium and cadmium in wheat at different salinities

Abstract

Interaction of Se up to 8?mg?kg^?1 soil and Cd at 5 and 15?mg?kg^?1 soil in wheat at different salinities was evaluated. Se concentrations in wheat shoots were progressively increased in parallel to Se in soil but decreased by addition of Cd. With increasing salinity, Cd concentrations increased and Se decreased. At low salinity, low addition of Se to the soil reduced Cd accumulation. At moderate and high salinities, only high Se amendment led to decline in Cd uptake, at the expense of reduction in biomass yield. Se at 0.5?mg?kg^?1 soil alleviated the negative effect of Cd on shoot yield.     

Application of electrochemical reactor divided by cellulosic membrane for optimized simultaneous removal of phenols,chromium, and ammonia from tannery effluents

The post treatment of simulated tannery wastewater was evaluated in an electrochemical oxidation process under galvanostatic conditions. A continuous flow reactor divided by a cellulosic membrane consisted of Ti/SnO₂–Sb anodes and iron cathodes was used. Central composite design and response surface methodology (RSM) were applied to investigate the effects of six operational parameters, namely initial concentration of total phenols (TPh), total chromium (TCr), total ammonia nitrogen (TAN), flow rate (Q), current intensity (I), and electrode surface area (A). Effectiveness of the innovative cellulosic membrane was proven by considerable pH variations in the anolyte and catholyte chambers. A faster removal rate was observed for TPh and TAN, followed by TCr. The treatment level was very sensitive to Q and I in the studied ranges. RSM showed the removal efficiencies of 78.14%, 63.42%, and 86.09% for TPh, TCr, and TAN, respectively, are achieved under optimal conditions with consumption of only 9.03 kWh m^?3 electrical energy. Chlorinated compounds such as chloroform, 2,4-dichlorophenol, and chlorobenzene were detected as the degradation intermediates. According to the obtained results, electrolysis in the divided cell with cellulosic membrane is a practical, cost-effective method for advanced treatment of tannery effluents.     

Hydrogeochemistry study and groundwater quality assessment in the north of Isfahan,Iran

This study presents the groundwater quality assessment in the north of Isfahan, Iran. In the study area, assessment and measurement of groundwater hydrochemical parameters such as pH, total dissolved solids (TDS), electrical conductivity (EC), sodium absorption ratio (SAR), total hardness, major cations (K⁺, Na⁺, Ca²⁺ and Mg²⁺) and major anions (Cl^?, \({\text{HCO}}_{ 3}^{ - } ,{\text{CO}}_{3}^{2 - }\) and \({\text{SO}}_{4}^{2 - }\)) concentrations were performed. Accordingly, the 66 water samples from different locations were collected during April and May 2015. Water samples collected in the field were analyzed in the laboratory for cations and anions using the standard methods. In this research, the analytical results of physiochemical parameters of groundwater were compared with the standard guideline values as recommended by the world health organization (WHO) for drinking and public health purposes. The pH values of groundwater samples varied from 7.05 to 8.95 with a mean of 7.78, indicating a neutral to slightly alkaline water. TDS values showed that 14% of the samples exceeds the desirable limit given by WHO. EC values varied from 213 to 4320 µS/cm, while 23% of the samples were more than the standard limit. Gibbs diagram had shown that 90% of the samples in the study area fall in the rock weathering zone, and this means that chemical weathering of rock-forming minerals is the main factor controlling the water chemistry in the study area. Irrigation suitability and risk assessment of groundwater are evaluated by measuring EC, %Na, SAR and RSC. According to the dominant cations and anions, five types of water were identified in the water samples: Ca-HCO₃, Ca-SO₄, Na-Cl, Na-HCO₃ and Na-SO₄. The results show that the majority of samples (30 samples, 45%) belongs to the mixed Na-SO₄ water type. Correlation analysis and principal component analysis was used to identify the relationship between ions and physicochemical parameters. Results indicated that 18 stations of the study area had the best quality and can be used for irrigation and drinking purposes in the future.     

Improved power density and Cr/Pb removal using ozone in a microbial desalination cell

Environmental Chemistry Letters - Microbial desalination cells are promising bio-electrochemical technologies for water desalination, treating wastewater and bioelectricity production. In this...     

Changes in chemical forms of lead in temperate and semiarid soils in sterile and unsterile conditions

Sequential extraction has been used as a suitable method for fractionation of chemical forms of trace elements and study of their plant availability. Surface soils were sampled from Guilan and Hamadan provinces in north and northwest of Iran with temperate and semiarid climates. The chemical forms of Pb in the Pb(NO₃)₂-treated (400 μg Pb g⁻¹) soils have been studied in solid state incubation (FC) at 27°C in sterile and unsterile conditions. After 20 min and 3600 h a sequential extraction scheme was also used to fractionate Pb of incubated samples into soluble-exchangeable (Sol-Exch), carbonates associated (ACar), organic matter associated (AOM), Mn oxide associated (AMnOx), Fe oxide associated (AFeOx), and residual (Res) forms. Temperate soil samples had higher clay content, cation exchange capacity (CEC), dichromate oxidable organic carbon (OC), total Kjeldahl-nitrogen (TN), biological activity, amorphous and crystalline Fe and Al, but semiarid soil samples had higher sand content, pH, equivalent calcium carbonate (ECC), available P and K. Soil lead fractionation revealed that in both groups of soils Pb largely changed to exchangeable, carbonates associated and organic associated forms after 20 min. The chemical forms of Pb differed widely among soils after 3600-h incubation. The conversion rate of Pb from more available forms to less available forms was higher in temperate soils with higher Fe–Mn oxides and OM contents compared to semiarid soils. In temperate soils after 3600-h incubation, greater content of Pb was observed in Res (68%), AOM (14%), ACar (7%), and AMnOx (5%) fractions. However, in semiarid soils greater content of Pb was observed in Res (61%), ACar (16%), Sol-Exch (8%), and AOM (8%) fractions. The sum of AMnOx and AFeOx chemical forms for Pb in semiarid soils compared to temperate soils was lower. It was only 7% against 9% in temperate soils. Soil microorganisms in unsterile soils had significant effect on AOM, AFeOx and Res fractions of Pb. They not only increased AOM and AFeOx fractions of Pb in soils but also decreased Res fraction of Pb significantly.