A comprehensive systematic review of photocatalytic degradation of pesticides using nano TiO2

Environmental Science and Pollution Research - This study has systematically reviewed all of the research articles about the photocatalytic degradation of pesticides using titanium dioxide (TiO2)...     

Comparative cancer risk assessment of THMs in drinking water from well water sources and surface water sources

This research evaluates the lifetime cancer risks from trihalomethanes in Tehran's drinking water. The Trihalomethanes were measured in seven different water districts. Sixty-three samples were taken from tap water across the city for 7 months. The samples were analyzed for trihalomethanes using US EPA method 524.2. The average concentration of total trihalomethanes in different districts were between 0.81 and 9.0 μg/L, and the highest concentrations were detected in district 2 at 19.5 μg/L. Total lifetime cancer risks assessment from exposure to trihalomethanes in drinking water (ingestion, inhalation, and skin routes) were performed for people living in different districts in Tehran. The lifetime cancer risk was 7.19 × 10(-5) in district 2 (a more affluent neighborhood) where mostly surface water sources is used to supply drinking water and 9.38 × 10(-6) in district 7 (a less affluent neighborhood) which is mainly supplied with well water sources. Based on the population data, the total expected lifetime cancer cases from exposure to trihalomethanes are 104, 108, 81, 81, 41, 27, and three for districts 1 through 7, respectively. The average lifetime cancer risk was 4.33 × 10(-5) which means a total of 606 lifetime cancer cases for the entire province of Tehran. The highest risk from THMs seems to be from the inhalation route followed by ingestion and dermal contacts.     

Examination of the operator and compensator tank role in urban wastewater treatment using activated sludge method

No doubt, operator is one of the main fundaments in wastewater treatment plants. By identifying the inadequacies, the operator could be considered as an important key in treatment plant. Several methods are used for wastewater treatment that requires spending a lot of cost. However, all investments of treatment facilities are useable when the expected efficiency of the treatment plant was obtained. Using experienced operator, this goal is more easily accessible. In this research, the wastewater of an urban community contaminated with moderated, diluted and highly concentrated pollution has been treated using surface and deep aeration treatment method. Sampling of these pilots was performed during winter 2008 to summer 2009. The results indicate that all analyzed parameters were eliminated using activated sludge and surface aeration methods. However, in activated sludge and deep aeration methods in combination with suitable function of operator, more pollutants could be eliminated. Hence, existence of operator in wastewater treatment plants is the basic principle to achieve considered efficiency. Wastewater treatment system is not intelligent itself and that is the operator who can organize even an inefficient system by its continuous presence. The converse of this fact is also real. Despite the various units and appropriate design of wastewater treatment plant, without an operator, the studied process cannot be expected highly efficient. In places frequently affected by the shock of organic and hydraulic loads, the compensator tank is important to offset the wastewater treatment process. Finally, in regard to microbial parameters, existence of disinfection unit is very useful.     

Evaluation of exposure to the airborne asbestos in an asbestos cement sheet manufacturing industry in Iran

Iran imports nearly 55,000 tons of Chrysotile asbestos per year and asbestos cement (AC) plants contribute nearly 94% of the total national usage. In the present study, airborne asbestos concentrations during AC sheet manufacturing were measured. The fiber type and its chemical composition were also evaluated by scanning electron microscopy (SEM), with energy-dispersive X-ray analysis. Airborne total fiber concentrations of 45 personal samples were analyzed by phase contrast microscopy. The results have highlighted that 15.5% of samples exceed the threshold limit value (TLV) established the American Conference of Governmental Industrial Hygienists, which is 0.1 fiber per milliliter (f/ml). Personal monitoring of asbestos fiber levels indicated a ranged from 0.02?±?0.01 to 0.16?±?0.03 f/ml. The geometrical mean was 0.05?±?1.36 f/ml, which is considerably lower than the TLV. SEM data demonstrate that the fibrous particles consisted, approximately, of Chrysotile (55.89%) and amphiboles (44.11%). We conclude that the industrial consumption of imported Chrysotile asbestos is responsible for the high airborne amphibole asbestos levels in the AC sheet industry. More research is needed to improve characterization of occupational exposures by fiber size and concentration in a variety of industries.     

Effects of Logged and Unlogged Forest Patches on Avifaunal Diversity

In the Hyrcanian forests of northern Iran, reduced-impact silviculture systems, (single-tree and group-tree selection) were applied over a large area, which generated different local habitat structures. The aim of this study was to assess the differences between treated and untreated areas of forest and their effect on avian richness, abundance and diversity (R.A.D). Birds were surveyed during the breeding season in 2009 by 100-point counts, equally distributed in the treated and untreated area. Avian R.A.D was significantly different and higher in the untreated area. Generally, forestry practices cause noticeable changes in canopy percentage, tree composition, snags and shrub number. Treated forest habitats in the area of study had a much more developed understory, fewer snags and fewer large diameter trees. The results highlighted the importance of forest maturity and showed that preventing silvicultural disturbances may not be the best solution for conserving and enhancing biodiversity. Rather, methods such as selective cutting seem an appropriate and sustainable way of forest management. It is suggested that forests should be managed to conserve structural elements which create favorable habitat for bird species, preventing future species losses due to logging practices.     

Technical and economical assessment of a multipurpose electric vehicle for farmers

The RAMseS project, under the European Commission's 6th Framework Program, is dedicated to the construction and test of low-power operations based on photovoltaic power and a multipurpose electric vehicle. In the present study, the life-cycle costs and economical indices for the vehicle during its life span were assessed, compared to those of a standard internal combustion engine vehicle (ICEV). The results indicated that the life-cycle costs for the RAMseS vehicle and the ICEV are the same for a fuel unit price of 1.8 €/L. Also, the levelized cost of energy (LCE) for the RAMseS vehicle, was found to be 2.13 €/kWh, while RAMseS LCE, without EV taken into account, was shown to be 0.62 €/kWh. The RAMseS payback period (PBP) without EV taken into account was calculated to be 9 years if the value of the produced energy becomes at least 0.35 €/kWh. Vehicles that use PV systems as their power source, such as RAMseS, will be economically effective for fuel costs higher than 1.8 €/L, but considering the environmental benefits that are provided in terms of external costs, they can be considered profitable even at lower fuel costs.     

Integrated multitrophic aquaculture (IMTA) as an environmentally friendly system for sustainable aquaculture: functionality,species, and application of biofloc technology (BFT)

Environmental Science and Pollution Research - Aquaculture is one of the fastest-growing industries in the world, and its prominent role has been proven in supplying food for the growing world...     

A modified exergy evaluation of using carbon-black/water/EG nanofluids as coolant of photovoltaic modules

Environmental Science and Pollution Research - To provide the progressive global demand for energy, the use of renewable energies is being rapidly developed. Since solar radiation is available in...     

Lead redistribution in a mine soil treated with three manures and incubated at two different temperatures

The study of heavy metals’ redistribution between different fractions allows to know their bioavailability and mobility in soils. Soil samples were collected from a lead mine in Hamadan provinces, NW Iran. In a factorial experiment soil was treated with cow, sheep and poultry manures (20?g?kg^?1 soil) separately and incubated near field capacity at 10°C and 37°C. An untreated soil (as control) was also incubated at the same temperatures. After 0 and 120 days, a sequential extraction scheme was used to fractionate Pb of incubated samples into soluble-exchangeable (Sol-Exch), organic matter associated (AOM), carbonates associated (ACar), and residual (Res) forms. Soil Pb in Sol-Exch and AOM fractions were increased by manure application significantly. The AOM and ACar forms of Pb were higher in soils treated with the manures and incubated in lower temperature. In contrast, the Sol-Exch and Res chemical forms of Pb were higher in the soils incubated at 37°C. These results may be related to the higher calcium carbonate dissolution and organic matter decomposition because of better biological activity in the soils incubated in higher temperature. The increase of the Res fraction (stable form) in this condition may resulted in lower toxicity and mobility in soil environment.     

Kinetics study of photocatalytic process for treatment of phenolic wastewater by TiO2 nano powder immobilized on concrete surfaces

In this study, kinetics of photocatalytic degradation of phenolic wastewater in immobilized photocatalytic reactor was investigated. Immobilization of titanium dioxide (TiO₂) nano powders on concrete surfaces were accomplished with epoxy concrete sealer. Kinetics of photocatalytic reactions has been proposed to follow the Langmuir–Hinshelwood model in different initial phenol concentration, pH, and UV lamp intensity. First-order reaction kinetics with respect to the pollutant concentration was obtained for the reaction. Effect of UV lamp intensity showed that kinetic constants were proportional to the power of 0.73–1 of the photonic flow. In all cases kinetic constant increases as pH of the system reached up to 12 units. Several reaction intermediates were identified using the GC/Mass analysis. Products at the initial stage of the reaction were aromatic compounds, contained hydroquinone, benzoquinone, and catechol. These intermediates underwent further photocatalytic oxidation to aliphatic compounds and finally into CO₂ and H₂O after 4?h. Kinetic constants of intermediate compounds were determined using mathematical–chemical equations and nonlinear regression. Data showed that the differences between the mathematical model and Langmuir–Hinshelwood model for the kinetic constant was less than 5%.