Ambient monitoring of asbestos in selected Italian living areas

This paper presents the results of an intensive monitoring activity of the particulate, fall-out and soil of selected living areas in Italy with the aim to detect the asbestos concentration in air and subsequent risk of exposure for the population in ambient living environments, and to assess the nature of the other mineral phases composing the particulate matrix. Some areas were sorted out because of the presence of asbestos containing materials on site whereas others were used as blank spots in the attempt to detect the background environmental concentration of asbestos in air. Because the concentration of asbestos in ambient environments is presumably very low, and it is well known that conventional low–medium flow sampling systems with filters of small diameter (25 mm) may collect only a very small fraction of particulate over a short period, for the first time here, an intense monitoring activity was conducted with a high flow sampling system. The high flow system requires the use of large cellulose filters with the advantage that, increasing the amount of collected dust, the probability to collect asbestos fibers increases. Both the protocol of monitoring and analysis are novel and prompted by the need to increase the sensitivity towards the small number of expected fibers. With this goal, the collection of fall-out samples (the particulate falling into a collector filled with distilled water during the monitoring shift) and soil samples was also accomplished. The analytical protocol of the matrix particulate included preliminary X-ray powder diffraction (XRPD), optical microscopy and quantitative electron microscopy (SEM and TEM). Correlations with climatic trends and PM10 concentration data were also attempted.The surprising outcome of this work is that, despite the nature of the investigated site, the amount of dispersed asbestos fibers is very low and invariably lower than the theoretical method detection limits of the SEM and TEM techniques for identification and counting of asbestos fibers. The results are compared to the literature data worldwide and an updated model for asbestos fibers dispersion in ambient environments is proposed.     

A novel approach for characterization of polycyclic aromatic hydrocarbon (PAH) pollution patterns in sediments from Guanabara Bay, Rio de Janeiro, Brazil

A novel multivariate method based on principal component analysis of pre-processed sections of chromatograms is used to characterize the complex PAH pollution patterns in sediments from Guanabara Bay, Brazil. Five distinct sources of 3- to 6-ring PAHs could be revealed. The harbour is the most contaminated site in the bay, its plume stretches in a South West to North East direction and the chemical profile indicates mainly pyrogenic sources mixed with a fraction of high-molecular-weight petrogenic PAHs. Rio São João de Meriti is the second largest source of PAHs, and introduces mainly a fraction of low-molecular-weight petrogenic PAHs from the western region of Rio de Janeiro. The sites close to the ruptured pipeline at the Duque de Caxias Refinery show a distinctive pollution pattern indicating a heavy petroleum fraction. The method also led to the identification of new potential indicator ratios also involving coeluting peaks (e.g., triphenylene and chrysene).     

Fungitoxicity of lyophilized and spray-dried garlic extracts

Among the compounds discussed for anti-microbial and anti-fungal use allicin (allylthiosulfinate, diallyl disulfide-S-monoxide), an active ingredient of garlic, has attracted considerable attention. The objective of this study is to determine the antifungal activity of a local garlic ecotype (Voghiera) extracts against different pathogens. Primary screening was carried out by the agar plates technique using ethanol garlic extract at four final concentrations against the following organisms: Alternaria alternata, Aspergillus spp., Colletotrichum acutatum, Didymella bryoniae, Fusarium culmorum, Fusarium avenaceum, Fusarium gramineareum, Gliocladium roseum 47, Pythium splendens, Rhizoctonia solani, Sclerotium rolfsii, Stemphylium vesicarium, Trichoderma longibranchiatum, and Botrytis cinerea. Secondary screening was carried out using a lyophilized and a spray-dried preparation at different concentrations against the organisms selected for the high inhibition garlic effect in the primary screening and compared with the commercial fungicides mancozeb and iprodione. The best results were observed for the spray-dried garlic compound that showed a good fungicidal activity at the concentration of 1.5 g/10 mL while lyophilized garlic at the same concentration exhibited less inhibition activity against the four fungi analyzed in the second screening.     

Assessment of Ni accumulation capability by fungi for a possible approach to remove metals from soils and waters

ABSTRACT

Abandoned industrial sites and mines may constitute possible hazards for surrounding environment due to the presence of toxic compounds that may contaminate soils and waters. The possibility to remove metal contaminants, specifically nickel (Ni), by means of fungi was presented exploiting a set of fungal strains isolated from a Ligurian dismissed mine. The achieved results demonstrate the high Ni(II) tolerance, up to 500 mg Ni l^?1, and removal capability of a Trichoderma harzianum strain. This latter hyperaccumulates up to 11,000 mg Ni kg^?1, suggesting its possible use in a bioremediation protocol able to provide a sustainable reclamation of broad contaminated areas.     

Novel two-step vapor-phase synthesis of UV–Vis light active Fe2O3/WO3 nanocomposites for phenol degradation

Supported Fe₂O₃/WO₃ nanocomposites were fabricated by an original vapor phase approach, involving the chemical vapor deposition (CVD) of Fe₂O₃ on Ti sheets and the subsequent radio frequency (RF)-sputtering of WO₃. Particular attention was dedicated to the control of the W/Fe ratio, in order to tailor the composition of the resulting materials. The target systems were analyzed by the joint use of complementary techniques, that is, X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), energy dispersive X-ray spectroscopy (EDXS), X-ray photoelectron spectroscopy (XPS), secondary ion mass spectrometry (SIMS), and optical absorption spectroscopy. The results showed the uniform decoration of α-Fe₂O₃ (hematite) globular particles by tiny WO₃ aggregates, whose content could be controlled by modulations of the sole sputtering time. The photocatalytic degradation of phenol in the liquid phase was selected as a test reaction for a preliminary investigation of the system behavior in wastewater treatment applications. The system activity under both UV and Vis light illumination may open doors for further material optimization in view of real-world end-uses.

     

Health sector recovery in early post‐conflict environments: experience from southern Sudan

Health sector recovery in post‐conflict settings presents an opportunity for reform: analysis of policy processes can provide useful lessons. 1 The case of southern Sudan is assessed through interviews, a literature review, and by drawing on the experience of former technical advisers to the Ministry of Health. In the immediate post‐conflict phase, the health system in southern Sudan was characterised by fragmentation, low coverage of health services, dismal health outcomes and limited government capacity. Health policy was extensively shaped by the interplay of context, actors and processes: the World Bank and the World Health Organization became the primary drivers of policy change. Lessons learned from the southern Sudan case include the need for: sustained investment in assessment and planning of recovery activities; building of procurement capacity early in the recovery process; support for funding instruments that can disburse resources rapidly; and streamlining the governance structures and procedures adopted by health recovery financing mechanisms and adapting them to the local context.     

Accumulation and metal fluxes in the central Venice Lagoon during the last century

Samples from 18 short sediment cores were analyzed for major and trace metals (Al, Fe, Ca, K, Mg, Mn, Si, Ti, Pb, Zn, Cu, Ni, and Cr), ²¹⁰Pb, ¹³⁷Cs, total organic carbon, grain size, and mineralogical composition to find the record of major environmental changes, either natural or anthropogenic, and to establish their chronologies. Some sediments are characterized by nearly constant composition over time, but others clearly show signs of an increasing marine influence, as an increase of the carbonate contents, after the opening of the Malamocco-Marghera Canal in 1969. These changes sometimes obscure the real pattern of pollutants and tracers, which is revealed by normalization against Al. Zn is the most important contaminant, with concentration factors up to 9.3 times the background level, and the most contaminated sediments are those within a few kilometers from the industrial district of Porto Marghera. ²¹⁰Pb activity-depth profiles were used to calculate apparent accumulation rates that provide a basis for the assessment of metal fluxes. The sediments of several sites show a significant increase in anthropogenic metal contamination starting from the second decade of last century, with maximum inputs from 1930 to 1970. The decrease of heavy metal concentrations observed in surficial sediments of some sampling sites could be related to a recent reduction of pollutant inputs.     

Ozone biomonitoring in Northern Italy

This report presents the results of an ozone monitoring experience performed with tobacco indicator plants (Nicotiana tabacum L. cv. Bel-W3). These bioindicators were exposed to ambient air in 23 sites in Northern Italy from 27 April 1987 to 21 October 1987. Typical ozone-induced leaf necrosis was observed in every site. The percentage increase in injured leaf area was estimated weekly and a Leaf Injury Index (LII) was calculated. The weekly series of LIIs were statistically inspected for spatial and temporal relationships. Sample correlation coefficients were statistically significant for almost every possible pair of sites. The time series properties of ten series of LIIs with no missing data were analyzed using Box-Jenkins models. An autoregressive first order model, or AR(1), was selected to remove the autocorrelation from these series. Linear correlation coefficients between prewhitened (i.e. from which autocorrelation had been removed) pairs of LII series were statistically significant. Hence synchronous variations in leaf necrosis could only be related to the regional diffusion of tropospheric ozone.Work carried out as part of the research programme: ENEL's contribution to the knowledge of important environmental issues, Research line; Effects of atmospheric pollution on the land.     

Correlation between environmental parameters and leaf injury in Nicotiana tabacum L. cv. ‘Bel-W 3’

Tobacco plants (Nicotiana tabacum L. cv. Bel-W3) were exposed to ambient air for 25 weeks during the 1987 growing season next to an air pollution monitoring station in Brera (Milan, Italy). The research objective was to study the influence of selected environmental parameters on leaf damage in this plant, which is widely used as an ozone indicator. A multiple linear correlation model was estimated between leaf damage and available meteorological and air pollution data. Leaf injury was positively correlated with ozone integrated exposure and temperature, but negatively with vapour pressure deficit. A linear correlation model was used to estimate ozone integrated exposure from the leaf injury indexWork carried out as part of the research programme: ENEL's contribution to the knowledge of important environmental issues, research line: Effects of atmospheric pollution on the land.