Contamination by polychlorinated biphenyls (PCBs) in striped dolphins (Stenella coeruleoalba) from the Southeastern Mediterranean Sea

Concentrations of polychlorinated biphenyls (PCBs) including dioxin-like PCBs (non-ortho, PCB 77, PCB 126, and PCB 169 and mono-ortho, PCB 105, PCB 118, and PCB 156) were measured in different organs and tissues (melon, blubber, liver, kidney, lung, heart, and muscle tissue) of striped dolphins (Stenella coeruleoalba) from the Eastern Mediterranean Sea (Adriatic Sea). The mean highest levels were in blubber and melon, followed by liver, kidney, lung, heart, and muscle tissue. PCB profiles were similar in all tissues and organs being dominated by the higher chlorinated homologues (hexa-CBs, 55.8-62.1%; penta-CBs, 15.4-20.0%; and hepta-CB PCB 180, 12.7-16.5%). Major PCBs in all tissues were congeners 138 and 153 collectively accounting for 50.6-58.3% of the total PCB concentrations, followed by PCB 101, 105, 118, and 180 constituting from 27.0% to 31.0%. PCB levels were higher in adult males than in adult females. The estimated 2,3,7,8-TCDD toxic equivalents of non- and mono-ortho PCBs were much higher than the threshold level above which adverse effects have been observed in other marine mammals species, suggesting that striped dolphins in this region are at risk for toxic effects.     

Adsorption behavior of α -cypermethrin on cork and activated carbon

Studies were undertaken to determine the adsorption behavior of α -cypermethrin [R)-α -cyano-3-phenoxybenzyl(1S)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate, and (S)-α-cyano-3-phenoxybenzyl (1R)-cis-3-(2,2-dichlorovinyl)-2,2-dimethylcyclopropanecarboxylate] in solutions on granules of cork and activated carbon (GAC). The adsorption studies were carried out using a batch equilibrium technique. A gas chromatograph with an electron capture detector (GC-ECD) was used to analyze α -cypermethrin after solid phase extraction with C18 disks. Physical properties including real density, pore volume, surface area and pore diameter of cork were evaluated by mercury porosimetry. Characterization of cork particles showed variations thereby indicating the highly heterogeneous structure of the material. The average surface area of cork particles was lower than that of GAC. Kinetics adsorption studies allowed the determination of the equilibrium time—24 hours for both cork (1–2 mm and 3–4 mm) and GAC. For the studied α -cypermethrin concentration range, GAC revealed to be a better sorbent. However, adsorption parameters for equilibrium concentrations, obtained through the Langmuir and Freundlich models, showed that granulated cork 1–2 mm have the maximum amount of adsorbed α-cypermethrin (q_m) (303 μg/g); followed by GAC (186 μ g/g) and cork 3-4 mm (136 μg/g). The standard deviation (SD) values, demonstrate that Freundlich model better describes the α -cypermethrin adsorption phenomena on GAC, while α -cypermethrin adsorption on cork (1-2 mm and 3-4 mm) is better described by the Langmuir. In view of the adsorption results obtained in this study it appears that granulated cork may be a better and a cheaper alternative to GAC for removing α -cypermethrin from water.     

Dissipation of terbuthylazine,metolachlor, and mesotrione in soils with contrasting texture

ABSTRACT

This study evaluates the dissipation of terbuthylazine, metolachlor, and mesotrione at different depths in soils with contrasting texture. The field trial was conducted at the Padua University Experimental Farm, north-east Italy. The persistence of three herbicides was studied in three different soil textures (clay soil, sandy soil, and loamy soil) at two depths (0–5 and 5–15 cm). Soil organic carbon content was highest in the clay (1.10%) followed by loam (0.67%) and sandy soil (0.24%); the pH of soils was sub-alkaline. Terbuthylazine, metolachlor, and mesotrione were applied on maize as a formulated product (Lumax®) at a dose of 3.5 L ha^?1. Their dissipation in the treated plots was followed for 2 months after application. The concentrations of herbicides were analyzed by liquid chromatography-mass spectrometry. The dissipation of terbuthylazine, metolachlor, and mesotrione could be described by a pseudo first-order kinetics. Terbuthylazine showed the highest DT50, followed by metolachlor and mesotrione. Considering the tested soil, the highest DT50 value was found in clay soil for terbuthylazine and metolachlor, whereas for mesotrione there was no difference among soils. Significant differences were found between the two soil depths for terbuthylazine and metolachlor, whereas none were found for mesotrione. These results suggest that soil texture and depth have a strong influence on the dissipation of terbuthylazine and metolachlor, whereas no influence was observed on mesotrione because of its chemical and physical properties.     

PCDD/Fs and PCBs in ambient air in a highly industrialized city in Northern Italy

Ambient air samples were collected in five locations around a polychlorobiphenyl (PCB) production plant in a highly industrialized city in the north of Italy, for the analysis of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) and PCBs.PCDD/F atmospheric concentrations were lower than those generally detected in urban areas, while PCB concentrations were higher than in urban and industrialized areas in other countries, especially in the locations closest to the plant. To identify source emissions responsible for air pollution we used principal component analysis (PCA) to compare the “fingerprint” of the air in Brescia with some source-related experimental and published data. This analysis showed that the PCDD/F fingerprints were more similar to steel plant emission data, while none of the PCB air patterns were comparable to emission profiles, indicating that different sources are responsible for the concentration of these two pollutants. The highest PCB concentrations detected in the areas closest to the chemical plant are indicative of its impact on the surrounding environment.     

Reconstruction of the environmental evolution of a Sicilian saltmarsh (Italy)

The present study deals with the reconstruction of the environmental evolution of a Trapani saltmarsh (southwestern Sicily, Italy) by combining different analytical approaches such as metal content evaluation, low-field nuclear magnetic resonance (NMR) relaxometry, and benthic foraminifera identification. A 41 cm core was collected in the sediments of a Trapani saltmarsh (southwestern Sicily, Italy) at a water depth of about 50 cm. Different time intervals were recognized, each characterized by peculiar features that testify different environmental conditions. In particular, the bottom layers of the sediment core (41–28 cm) comprised the lowest amount of mud fraction, only some selected metals, and the lowest foraminiferal density. Here, co-occurrence of abundant microcrystals of gypsum and Ammonia tepida is indicative of hyper-saline conditions. In the sediments from 28 to 6 cm, mud fraction and number of metal elements resulted higher due to the increase of the anthropogenic pressure. The sediments in the last time interval, corresponding to the environmental recovery of the saltmarsh, showed an increase of foraminiferal density, a decrease of the mud fraction, and a trend in the metal concentration attributable to the protection policy applied since 1990. NMR relaxometry parameters highlighted the changes of sediment chemical–physical heterogeneity going from the bottom to the top of the core. These heterogeneities have been related to the different intervals recognized as aforementioned. The present study highlights how the anthropogenic pressure modifies the environmental conditions of a transitional ecosystem like saltmarshes.     

A performance-based tabular approach for joint systematic improvement of risk control and resilience applied to telecommunication grid,gas network,and ultrasound localization system

Environment Systems and Decisions - Organizational and technical approaches have proven successful in increasing the performance and preventing risks at socio-technical systems at all scales....     

Environmental Effects of Storage Preservation Practices: Controlled Flushing of Fine Sediment from a Small Hydropower Reservoir

Sediment flushing may be effective in mitigating loss of reservoir storage due to siltation, but flushing must be controlled to limit the impact on the downstream environment. A reliable prediction of the environmental effects of sediment flushing is hindered by the limited scientific information currently available. Consequently, there may be some controversy as regards to management decisions, planning the work, and monitoring strategies. This paper summarizes the main results of a monitoring campaign on the stream below a small alpine hydropower reservoir subjected to annual flushing between 2006 and 2009. The removed sediment was essentially silt, and the suspended solid concentration (SSC) of the discharged water was controlled to alleviate downstream impact. Control was achieved through hydraulic regulation and mechanical digging, alternating daytime sediment evacuation, and nocturnal clear water release. The four operations lasted about two weeks each and had an average SSC of about 4 g L^?1. Maximum values of SSC were generally kept below 10 g L^?1. Downstream impact was quantified through sampling of fish fauna (brown trout) and macroinvertebrate in the final reach of the effluent stream. The benthic community was severely impaired by the flushing operations, but recovered to pre-flushing values in a few months. As expected, the impact on brown trout was heavier on juveniles. While data biasing due to fish removal and re-stocking cannot be ruled out, the fish community seems to have reached a state of equilibrium characterized by a lower density than was measured before the flushing operations.     

The clinical impact of the first-trimester nuchal translucency between the 95th–99th percentiles

Objectives

To evaluate the clinical significance of nuchal translucency (NT) between the 95th–99th percentile in terms of typical and atypical chromosomal abnormalities (ACAs), associated fetal congenital defects and postnatal outcome.

Methods

A retrospective cohort study of fetuses with NT between the 95th–99th percentile. Data regarding the rate of associated fetal defects, genetic abnormalities and postnatal outcome were collected.

Results

A total of 306 cases of fetuses with an NT between the 95th–99th percentiles were included. The overall rate of genetic abnormalities was 12.1% (37/306). Chromosomal abnormalities were found in 10.1% (31/306) of cases and 2% were ACA (6/306). Within this group, two were pathogenic Copy Number Variants (CNVs) and four were single gene disorders. The overall rate of fetal congenital defects was 13.7% (42/306). All ACAs were found in fetuses with congenital defects. Postnatally, a new diagnosis of a single gene disorder was made in 0.85% of cases (2/236).

Conclusions

The presence of an NT between the 95th–99th percentiles carries a 10-fold increased risk of fetal defects, representing an indication for referral for a detailed fetal anatomy evaluation. The risk of ACA is mainly related to the presence of fetal defects, irrespective of the combined test risk.