Accounting for enforcement costs in the spatial allocation of marine zones

Marine fish stocks are in many cases extracted above sustainable levels, but they may be protected through restricted‐use zoning systems. The effectiveness of these systems typically depends on support from coastal fishing communities. High management costs including those of enforcement may, however, deter fishers from supporting marine management. We incorporated enforcement costs into a spatial optimization model that identified how conservation targets can be met while maximizing fishers’ revenue. Our model identified the optimal allocation of the study area among different zones: no‐take, territorial user rights for fisheries (TURFs), or open access. The analysis demonstrated that enforcing no‐take and TURF zones incurs a cost, but results in higher species abundance by preventing poaching and overfishing. We analyzed how different enforcement scenarios affected fishers’ revenue. Fisher revenue was approximately 50% higher when territorial user rights were enforced than when they were not. The model preferentially allocated area to the enforced‐TURF zone over other zones, demonstrating that the financial benefits of enforcement (derived from higher species abundance) exceeded the costs. These findings were robust to increases in enforcement costs but sensitive to changes in species’ market price. We also found that revenue under the existing zoning regime in the study area was 13–30% lower than under an optimal solution. Our results highlight the importance of accounting for both the benefits and costs of enforcement in marine conservation, particularly when incurred by fishers. Justificación de los Costos de Aplicación en la Asignación Espacial de Zonas Marinas     

Glacier Variability (1967‐2006) in the Teton Range,Wyoming, United States1

Edmunds, Jake, Glenn Tootle, Greg Kerr, Ramesh Sivanpillai, and Larry Pochop, 2011. Glacier Variability (1967‐2006) in the Teton Range, Wyoming, United States. Journal of the American Water Resources Association (JAWRA) 48(1): 187‐196. DOI: 10.1111/j.1752‐1688.2011.00607.x Abstract: Glacier area and volume changes were quantified through the use of historical aerial photographs in Wyoming’s Teton Range. Glacier area changes in the Teton Range were estimated for three glaciers using unrectified aerial photography from 1967 to 2006. The total surface area of the three glaciers was 0.53 km² in 1967 and 0.40 km² in 2006, a decrease of 25% during the 39‐year period. The smallest glacier, Teepe, experienced the greatest area loss (60 ± 3%), whereas the largest glacier, Teton Glacier, lost 17 ± 3% of the 1967 area. For the current research, aerial photography from 1967 to 2002 was used to estimate glacier volume loss using stereoscopy techniques. The aerial photographs provide a finer resolution when compared with other datasets including satellite imagery (e.g., Landsat). Volume loss for the three glaciers was estimated to be 3.20 ± 0.46 million cubic meters over the period of 1967 to 2002. In assessing the primary climatic driver of the glacier ice loss, observed summer (June, July, and August) temperature data showed a statistically significant increase in temperatures when comparing the period of study (1968 to 2006) with historical temperatures from 1911 to 1967. When comparing spring (April 1st Snow Water Equivalent) snowpack for the period of study with historical records beginning in 1931, a significant difference in snowpack was not observed.     

Does your facility have a dust problem: Methods for evaluating dust explosion hazards

The hazards of dust explosions prevailing in plants are dependent on a large variety of factors that include process parameters, such as pressure, temperature and flow characteristics, as well as equipment properties, such as geometry layout, the presence of moving elements, dust explosion characteristics and mitigating measures. A good dust explosion risk assessment is a thorough method involving the identification of all hazards, their probability of occurrence and the severity of potential consequences. The consequences of dust explosions are described as consequences for personnel and equipment, taking into account consequences of both primary and secondary events.While certain standards cover all the basic elements of explosion prevention and protection, systematic risk assessments and area classifications are obligatory in Europe, as required by EU ATEX and Seveso II directives. In the United States, NFPA 654 requires that the design of the fire and explosion safety provisions shall be based on a process hazard analysis of the facility, process, and the associated fire or explosion hazards. In this paper, we will demonstrate how applying such techniques as SCRAM (short-cut risk analysis method) can help identify potentially hazardous conditions and provide valuable assistance in reducing high-risk areas. The likelihood of a dust explosion is based on the ignition probability and the probability of flammable dust clouds arising. While all possible ignition sources are reviewed, the most important ones include open flames, mechanical sparks, hot surfaces, electric equipment, smoldering combustion (self-ignition) and electrostatic sparks and discharges. The probability of dust clouds arising is closely related to both process and dust dispersion properties.Factors determining the consequences of dust explosions include how frequently personnel are present, the equipment strength, implemented consequence-reducing measures and housekeeping, as risk assessment techniques demonstrate the importance of good housekeeping especially due to the enormous consequences of secondary dust explosions (despite their relatively low probability). The ignitibility and explosibility of the potential dust clouds also play a crucial role in determining the overall risk.Classes describe both the likelihood of dust explosions and their consequences, ranging from low probabilities and limited local damage, to high probability of occurrence and catastrophic damage. Acceptance criteria are determined based on the likelihood and consequence of the events. The risk assessment techniques also allow for choosing adequate risk reducing measures: both preventive and protective. Techniques for mitigating identified explosions risks include the following: bursting disks and quenching tubes, explosion suppression systems, explosion isolating systems, inerting techniques and temperature control. Advanced CFD tools (DESC) can be used to not only assess dust explosion hazards, but also provide valuable insight into protective measures, including suppression and venting.     

Evaluating the potential for overpressures from the ignition of an LNG vapor cloud during offloading

Ignition of natural gas (composed primarily of methane) is generally not considered to pose explosion hazards when in unconfined and low- or medium-congested areas, as most of the areas within LNG regasification facilities can typically be classified. However, as the degrees of confinement and/or congestion increase, the potential exists for the ignition of a methane cloud to result in damaging overpressures (as demonstrated by the recurring residential explosions due to natural gas leaks). Therefore, it is prudent to examine a proposed facility’s design to identify areas where vapor cloud explosions (VCEs) may cause damage, particularly if the damage may extend off site.An area of potential interest for VCEs is the dock, while an LNG carrier is being offloaded: the vessel hull provides one degree of confinement and the shoreline may provide another; some degree of congestion is provided by the dock and associated equipment.In this paper, the computational fluid dynamics (CFD) software FLACS is used to evaluate the consequences of the ignition of a flammable vapor cloud from an LNG spill during the LNG carrier offloading process. The simulations will demonstrate different approaches that can be taken to evaluate a vapor cloud explosion scenario in a partially confined and partially congested geometry.     

Compliance of Australian threatened species recovery plans with legislative requirements

Recovery plans are the main documents supporting management decision-making for threatened species. We evaluated Australian recovery plans to assess their appropriateness as conservation and management planning instruments. Six legislative requirements (species information and general requirements, species distribution and location, known and potential threats, objectives, performance criteria and actions, duration of the plan, and estimated costs of plan implementation) were used to assess the degree of compliance of recovery plans with the relevant legislation. We assessed all 236 official recovery plans which had been adopted as at January 2006. The results showed that plans were most compliant regarding the setting of objectives, performance criteria, recovery actions, and duration of plan. Most plans included a single performance criterion that was generally related to the population status of target species. Improvement is required in relation to identification of current threats and critical habitats, and the establishment of basic elements of monitoring and evaluation for measuring recovery progress. Gaps in ecological information are the main factors affecting adequate compliance with legislative requirements as opposed to managerial information (e.g. clarity in establishing the implementation schedule, costs and resource allocation). Planning deficiencies could be addressed by improving the recovery planning guidelines and more carefully reviewing the drafting and adoption of new plans.     

Restoring Forests and Associated Ecosystem Services on Appalachian Coal Surface Mines

Surface coal mining in Appalachia has caused extensive replacement of forest with non-forested land cover, much of which is unmanaged and unproductive. Although forested ecosystems are valued by society for both marketable products and ecosystem services, forests have not been restored on most Appalachian mined lands because traditional reclamation practices, encouraged by regulatory policies, created conditions poorly suited for reforestation. Reclamation scientists have studied productive forests growing on older mine sites, established forest vegetation experimentally on recent mines, and identified mine reclamation practices that encourage forest vegetation re-establishment. Based on these findings, they developed a Forestry Reclamation Approach (FRA) that can be employed by coal mining firms to restore forest vegetation. Scientists and mine regulators, working collaboratively, have communicated the FRA to the coal industry and to regulatory enforcement personnel. Today, the FRA is used routinely by many coal mining firms, and thousands of mined hectares have been reclaimed to restore productive mine soils and planted with native forest trees. Reclamation of coal mines using the FRA is expected to restore these lands’ capabilities to provide forest-based ecosystem services, such as wood production, atmospheric carbon sequestration, wildlife habitat, watershed protection, and water quality protection to a greater extent than conventional reclamation practices.     

Comparison of fine-scale acoustic monitoring systems using home range size of a demersal fish

We compared the results from fixed acoustic transmitters and transmitters implanted in lingcod Ophiodon elongatus provided by two fine-scale passive acoustic monitoring systems: the older Vemco^? Radio Acoustic Positioning (VRAP) system and the newer VR2W Positioning System (VPS) with either three or four receivers. The four-receiver VPS method calculated five times more positions of lingcod than VRAP and more than twice as many as the three-receiver VPS. Calculated positions of fixed transmitters were less precise with VRAP than either VPS approach. Measurements of home range for lingcod were similar between the four-receiver VPS and VRAP, which were both greater than the three-receiver VPS. Comparisons varied when lingcod were in/near complex habitats. As new technology develops, it is important to understand how new methods compare to previous methods. This may be important when describing patterns of movement or habitat use in the context of changes in habitat or management efforts.     

Social impact of the 2004 Manawatu floods and the 'hollowing out' of rural New Zealand

The Manawatu floods of 2004 have had significant, long-lasting social consequences. This paper draws on findings from a series of detailed surveys of 39 farm households directly affected by the floods and 17 individuals directly involved in managing the flood recovery programme. The nature of the impact on rural families highlights how the 'hollowing out' of rural New Zealand has changed the capacity of rural communities to respond to natural hazards and increased their sense of isolation. In addition, the floods exposed the vulnerability of rural communities. This is shown to have implications for policies designed to build resilience and improve responses to adverse events, including the need to support local, community initiatives on self-reliance and mutual support. Approaches to manage better long-term flood risks should be designed within a context of ongoing rural decline that has compromised the health of both individuals and communities.     

Assessing Natural and Anthropogenic Variability in Wetland Structure for Two Hydrogeomorphic Riverine Wetland Subclasses

The hydrogeomorphic approach (HGM) to wetland classification and functional assessment has been applied regionally throughout the United States, but the ability of HGM functional assessment models to reflect wetland condition has limited verification. Our objective was to determine how variability derived from anthropogenic effects and natural variability impacted site assessment variables within regional wetland subclasses in central Oklahoma. We collected data for nine potential assessment variables including vegetation physiognomy (e.g., tree basal area, herbaceous cover, canopy cover, etc.) and soil organic matter at wetlands of two HGM riverine subclasses (oxbow and riparian) in May and June, 2010. Using Akaike Information Criteria, we identified limited relationships between landscape disturbance metrics and assessment variables within subclasses. The high degree of natural variability from climatic and hydrologic factors within both subclasses may be masking the impact of landscape disturbance on the other measured assessment variables. Precipitation had significant effects on assessment variables within each of the subclasses. To reduce natural climatic variability, the reference domain may need to be further subdivided. The approach used in this study provides fairly rapid and quantitative methods for evaluating the effectiveness of using HGM assessment variables in assessing wetland condition regionally.