CONFLICTING PERSPECTWES ABOUT DETECTION LIMITS AND ABOUT THE CENSORING OF ENVIRONMENTAL DATA1

ABSTRACT: Current conventions for reporting analytical results from environmental samples brings the objectives of laboratory scientists into conflict with those of environmental scientists. The objective of chemical analyses is to provide estimates of the true composition of samples. Reported results must reflect the analytical uncertainty. Current conventions require left-censoring of those results below the Limit of Detection. The objective of statistical interpretation of environmental data is to provide estimates of the characteristics of ecosystems. Such statistical analyses are often confounded by left-censoring of analytical results. We review the different points of view and propose a compromise which recognizes these conflicting perspectives.     

PARTITIONING SMALL SCALE SPATIAL VARIABILITY OF RUNOFF AND EROSION ON SAGEBRUSH RANGELAND1

ABSTRACT: Most hydrologic models require input parameters which represent the variability found across an entire landscape. The estimation of such parameters is very difficult, particularly on rangeland. Improved model parameter estimation procedures are needed which incorporate the small-scale and temporal variability found on rangeland. This study investigates the use of a surface soil classification scheme to partition the spatial variability in hydrologic and interrill erosion processes in a sagebrush plant community. Four distinct microsites were found to exist within the sagebrush coppice-dune dune-interspace complex. The microsites explained the majority of variation in hydrologic and interrill erosion response found on the site and were discernable based on readily available soil and vegetation information. The variability within each microsite was quite low and was not well correlated with soil and vegetation properties. The surface soil classification scheme defined in this study can be quite useful for defining sampling procedures, for understanding hydrologic and erosion processes, and for parameterizing hydrologic models for use on sagebrush range-land.     

The boiling liquid expanding vapour explosion

The boiling liquid expanding vapour explosion (BLEVE) has existed for a long time and for most of this time it has been cloaked in mystery. Several theories have been put forward to explain this very energetic event but none have been proven. This paper describes a series of tests that have recently been conducted to study this phenomenon.

The study involved ASME code automotive propane tanks with nominal capacities of 400 litres. The tanks were exposed to a combination of pool and/or torch fires. These fire conditions led to thermal ruptures, and in some cases these ruptures resulted in BLEVEs. The variables in the tests were the pressure-relief valve setting, the tank wall thickness, and the fire condition.

In total, 30 tests have been conducted, of which 22 resulted in thermal ruptures. Of those tanks that ruptured, 11 resulted in what we call BLEVEs. In this paper, we have defined a BLEVE as the explosive release of expanding vapour and boiling liquid following a catastrophic tank failure. Non-BLEVEs involved tanks that ruptured but which only resulted in a prolonged jet release.

The objective of this study was to investigate why certain tank ruptures lead to a BLEVE rather than a more benign jet-type release. Data are presented to show how wall temperature, wall thickness, liquid temperature and fill level contribute to the BLEVE process.     

Changes in wetlands on nonfederal rural land of the conterminous United States from 1982 to 1987

Recent wetland area trends were estimated from the National Resources Inventory (NRI) for nonfederal rural lands for the period 1982–1987. NRI-based estimates of wetland area for states comprising the conterminous United States were highly correlated with estimates made by the US Fish and Wildlife Service and with estimates of coastal salt marsh wetlands made by the National Oceanic and Atmospheric Administration. Net wetland area declined by 1.1% (≈363,200 ha) during the five-year study period. Conversion to open water, primarily caused by natural flooding in western inland basins, was responsible for altering extensive wetland areas (≈171,400 ha). Of the human-induced wetland conversions, urban and built-up land was responsible for 48% of the wetland loss, while agricultural development was indicated in 37% of the converted wetland area. A decrease in rural land, and increases in both population, and urban and built-up land were associated with wetland loss among states. Potential reasons for wetland loss were different in 20 coastal states than in 28 inland states. Proportionately, wetland loss due to development was three times greater in coastal states than inland states, while agriculturally induced wetland losses were similar in both groups. The proportionate declines of forested vs nonforested wetlands were not significantly different among states.     

Environmental site assessments and audits: Building inspection requirements

Environmental site assessment criteria were originally developed by organizations that focused, almost exclusively, on surface, subsurface, and pollution source contamination. Many of the hazards associated with indoor environments and building structures were traditionally not considered when evaluating sources and entities of environmental pollution. Since a large number of building materials are potentially hazardous, careful evaluation is necessary. Until recently, little information on building inspection requirements of environmental problems has been published. Traditionally, asbestos has been the main component of concern. The ever-changing environmental standards have dramatically expanded the scope of building surveys. Indoor environmental concerns, for example, currently include formaldehyde, lead-based paint, polychlorinated biphenyls, radon, and indoor air pollution. Environmental regulations are being expanded and developed that specifically include building structures. These regulatory standards are being triggered by an increased awareness of health effects from indoor exposure, fires, spills, and other accidents that have resulted in injury, death, and financial loss. This article discusses various aspects of assessments for building structures.     

Continuous improvement at EG&G: The waste reduction pays (WARP) initiative

EG&G is a Fortune 200 company with annual sales of $2.7 billion. It designs and manufactures laboratory and field-test instruments and electronic and mechanical components for commercial customers. EG&G provides systems engineering, precision component manufacturing, and test-site operating and management services to many government agencies and laboratories. It employs 34,000 people worldwide. Recognizing the need to improve its business practices as they related to environmental excellence, EG&G initiated policies, procedures, and programs to establish itself as an environmentally responsible company. Waste reduction was designated priority number one in EGG's environmental program. Our major customers are also making waste reduction a high visibility program. For example, on August 3, 1993, the president signed Executive Order 12856 making pollution prevention at federal facilities a goal of this administration. This article describes the EG&G Waste Reduction Pays (WARP) program, developed for use by all its operating entities, and why it is a model program to implement Executive Order 12856. It also depicts how the implementation of the program at federal facilities differs, in some respects, from that at other EG&G operating units.     

ESTIMATING REGIONAL SNOW WATER EQUIVALENT WITH A SIMPLE SIMULATION MODEL1

A simple simulation model designed to monitor snow-packs of the central Sierra Nevada is described. The model estimates average snow water equivalent for rectangular subregions in the area. Static subregion characteristics, daily precipitation and mean and minimum air temperatures measured at three index stations are the only needed input values. A water balance technique simulates daily snowpack changes in each subregion. Reasonable basinwide water equivalent values are produced. The procedure should be useful for estimating snow water distribution in large mountainous watersheds.     

Study of factors associated with risk of work-related stairway falls

This report describes a study of stairway risk factors based on video tape recordings of workers using 31 flights of stairs selected from among the industries with the highest frequency and severity rates for stair-related injuries. The video tapes were reviewed to identify all incidents, i.e., falls, trips, slips, missteps, and moments of temporary instability. The characteristics of the 98 stair users who were involved in an incident were compared to the characteristics of a matched group of stair users who did not have incidents. The factors that best discriminated between the incident group and the nonincident group were: (a) The incident group tended to be those whose movement was impeded by others and who were older; and (b) The nonincident group tended to be those who were wearing glasses and those who were very large or heavy individuals. The influence of stairway physical features on the risk of injury was examined using correlation analysis. The measure of risk was the incidence rate (observed incidents per number of observed uses) for each flight as well as for each tread. Among the several variables significantly correlated with higher incidence rate are: (a) higher effective riser height and less effective tread depth; the safest stairs have an effective riser height not greater than 7 in. (18 cm) and an effective tread depth no less than 11 in. (27 cm); and (b) for descent only (92% of the injuries), the size of the nosing projection; it appears that nosing projections that exceed $\text{11}\text{16}$ in. (1.8 cm) are associated with higher incidence rates.     

Construction of guilds for habitat assessment

This article outlines a procedure for developing guilds for use in habitat assessment studies. It is based on a matrix constructed around layers of vegetation and other physical features of the environment used by vertebrate species for feeding and breeding. Modifications to permit inclusion of other life requirements such as cover are discussed. Examples are used to illustrate how species are assigned to guild cells based on their use of habitat, and how the association between a species and its environment does not have to be direct to influence the species' placement within the matrix.