典型铝合金在江津自然大气环境中的腐蚀行为研究

通过在我国江津典型工业污染大气环境进行大气暴晒实验,测定了1060纯铝、2A12铝合金和7A04铝合金在该地区的腐蚀速率,利用扫描电子显微镜（SEM）、能量色散X射线谱（EDX）、红外光谱（FT—IR）和X射线衍射仪（XRD）观察分析3种铝合金腐蚀表面形貌、元素分布和腐蚀产物结构。结果表明：随腐蚀时间的延长,铝及其合金腐蚀产物不断增多,失重数值增加,腐蚀失重与时间的关系呈幂函数规律（C—A t^n）;腐蚀产物形貌呈块状或粒状,呈现不均匀的凹凸形貌;腐蚀产物主要为Al（OH）3和Al2（SO4）3·14H2O;耐蚀性能由强至弱依次为1060〉2A12〉7A04。     

改性兰炭末对硝基苯生产废水的吸附处理

采用H_2O_2溶液对兰炭末进行改性,并将改性后的兰炭末用于硝基苯生产废水(COD为560 mg/L)的吸附处理。对改性前后的兰炭末进行了表征,考察了吸附效果的影响因素,并对吸附前后改性兰炭末的燃烧热进行了测定。表征结果显示,兰炭末经改性后比表面积和孔径均增大。实验结果表明:在改性兰炭末投加量为0.2 g/m L、吸附时间为180 min、吸附温度为30℃的条件下,废水的COD去除率为93.4%,处理出水达到GB 8978—1996《污水综合排放标准》中规定的排放标准;改性兰炭末对废水中COD的吸附过程符合准二级动力学方程和Freundlich等温吸附模型;吸附后的改性兰炭末燃烧热值增大。     

Study of nitrogen oxide absorption in the calcium sulfite slurry

Experiments were conducted using a bubbling reactor to investigate nitrogen oxide absorption in the calcium sulfite slurry. The effects of CaSO₃ concentration, NO₂/NO mole ratio and O₂ concentrations on NO₂ and SO₂ absorption efficiencies were investigated. Five types of additives, including MgSO₄, Na₂SO₄, FeSO₄, MgSO₄/Na₂SO₄ and FeSO₄/Na₂SO₄, had been evaluated for enhancing NO₂ absorption in CaSO₃ slurry. Results showed that CaSO₃ concentration had significant impact on NO₂ and SO₂ absorption efficiencies, and the highest absorption efficiencies of SO₂ and NO₂ could reach about 99.5 and 75.0 %, respectively. Furthermore, the NO₂ absorption was closely related to the NO₂/NO mole ratio, and the existence of NO₂ in flue gas may promote NO absorption. The presence of O₂ in simulated flue gas was disadvantage for NO _x removal because it can oxidize sulfite to sulfate. It was worth pointing out that FeSO₄/Na₂SO₄ was the best additive among those investigated additives, as the NO₂ removal efficiency was significantly increased from 74.8 to 95.0 %. IC and in situ FTIR results suggest that the main products were NO₃ ^? and NO₂ ^? in liquid phase and N₂O, N₂O₅ and HNO₃ in gas phase during the CaSO₃ absorption process.     

一维碳纳米管与金属氧化物材料研究

一维纳米结构是最吸引人的功能材料而被广泛关注.一维形态可以很容易地提高纳米结构的独特性能,使它们适合各种各样的应用程序,包括气体传感器、电致变色的设备、发光二极管、场发射器、超级电容器和纳米发电机.因此,目前已合成多种一维纳米结构形式的纳米棒、纳米线、纳米管、纳米带等.本文主要介绍了一维碳纳米管与金属氧化物的性质与研究现状,探讨两种材料的优缺点以期进行互补修饰合成新型复合材料.     

Bacterial communities in different locations, seasons and segments of a dairy wastewater treatment system consisting of six segments

A dairy wastewater treatment system composed of the 1st segment (no aeration) equipped with a facility for the destruction of milk fat particles, four successive aerobic treatment segments with activated sludge and a final sludge settlement segment was developed. The activated sludge is circulated through the six segments by settling sediments (activated sludge) in the 6th segment and sending the sediments beck to the 1st and 2nd segments. Microbiota was examined using samples from the non-aerated 1st and aerated 2nd segments obtained from two farms using the same system in summer or winter. Principal component analysis showed that the change in microbiota from the 1st to 2nd segments concomitant with effective wastewater treatment is affected by the concentrations of activated sludge and organic matter (biological oxygen demand [BOD]), and dissolved oxygen (DO) content. Microbiota from five segments (1st and four successive aerobic segments) in one location was also examined. Although the activated sludge is circulating throughout all the segments, microbiota fluctuation was observed. The observed successive changes in microbiota reflected the changes in the concentrations of organic matter and other physicochemical conditions (such as DO), suggesting that the microbiota is flexibly changeable depending on the environmental condition in the segments. The genera Dechloromonas, Zoogloea and Leptothrix are frequently observed in this wastewater treatment system throughout the analyses of microbiota in this study.     

辽河口浮游细菌和附着细菌群落结构及多样性分析

通过MiSeq高通量测序在盐度梯度变化下对辽河口海水中浮游细菌群落和附着细菌群落结构变化特点及与环境因子间相关性进行研究。环境因子包括盐度（S）、温度（T）、溶解氧（DO）、悬浮物（SS）、叶绿素a（Chl a）、细菌生产力（BP）、化学需氧量（COD）、硝酸盐（NO₃-N）、磷酸盐（PO₄-P）、硅酸盐（SiO₃-Si）和铵态氮（NH₄-N）。在对辽河口不同盐度区域表层选取代表站位并对其海水环境因子、细菌群落多样性指数、相似度、结构组成进行统计分析。结果显示:由河口向外海过程中水体的S和Chl a逐渐升高,DO、BP、COD以及N、P、Si营养盐的浓度逐渐降低。河口淡水区域β变形菌数量占优势,海水区域α变形菌和γ变形菌的数量逐渐增多。群落结构与环境因子相关性分析结果表明浮游细菌对环境因子变化较为敏感,而附着细菌对环境因子的变化敏感度较低。浮游细菌丰度与S、PO₄-P和BP有显著相关性（P < 0.01）,相关性系数分别为-0.963、0.996和0.995;附着细菌丰度与SS的相关性最为显著,相关性系数为0.997（P < 0.01）,此外与NH₄-N和Chl a也有显著相关性。实验结果表明S、PO₄-P、BP、DO和COD是影响浮游细菌丰度的影响因子,浮游细菌丰度与SS、NH₄-N和Chl a关系较为密切。相对附着细菌而言,浮游细菌在河口生态系统物质循环和能量流动方面发挥着更加重要的作用。     

南宁市区交通环境空气颗粒物中碳组分的污染特征分析研究

含碳颗粒物是大气颗粒物的重要组成部分,对人体健康产生很大的威胁.分别于2012年夏季及2013年冬季在南宁市选取六条主要交通干道采集了PM10、PM2.5样品,分析测定了其中的碳组分.结果表明,碳组分浓度季节变化明显.碳组分在细颗粒物中占有比重比在可吸入颗粒物中大.存在二次有机碳污染.对8种碳组分丰度分析说明南宁市大气颗粒物中碳组分的主要来源是燃煤、机动车尾气及生物质样品燃烧.     

Cf/SiC 复合材料表面 HfO2涂层的制备及其抗热冲击性能研究

目的研究等离子喷涂条件下Cf/SiC复合材料表面HfO_2涂层的物相、显微组织及其抗热冲击性能。方法通过水热合成和喷雾造粒制备出HfO_2粉体,并利用等离子喷涂在Cf/SiC复合材料表面制备HfO_2涂层,研究涂层的物相、显微组织和抗热冲击性能。结果水热合成的纳米HfO_2为单斜相结构,颗粒的平均粒径为10~15nm;等离子喷涂制备的HfO_2涂层组织中存在微裂纹和孔隙,涂层为单斜相结构,且经1350℃热处理后涂层的相结构未发生改变。等离子喷涂的HfO_2涂层与Cf/SiC复合材料基体结合良好,未观察到涂层、基体间界面分离的现象。经1350℃、50周次的空冷热冲击试验后,涂层未发生破坏失效;在1350℃水冷热冲击条件下,热循环20次时涂层表面出现剥落,27次时脱落面积50%。结论通过等离子喷涂制备的HfO_2涂层与Cf/SiC复合材料基体结合良好,涂层能够抵御1350℃空冷、50周次热冲击,且未发生破坏失效,涂层的1350℃水冷热循环寿命达27次。     

林地面积增加提高了农户营林积极性吗?——基于9省1 504个农户数据的倾向值匹配分析

论文利用9省1 504个农户调研数据,实证检验了新一轮集体林改后林地面积增加对农户营林积极性的因果效应。考虑到农户对林地经营面积决策的内生性问题,采用倾向值匹配方法对选择性偏差进行控制。匹配后,处理组和控制组在多个标准上均通过了平衡性检验。结果显示,林地面积增加确实促进了农户营林积极性的提高,但这是一个缓慢的动态调整过程。其中,资本投入强度在2010年以后才逐步表现为显著增加,增长率约为25%~27%,2013年进一步强化为28%~34%。资本投入强度的增加主要是由化肥和农药投入增加引起的,对种苗的投入强度并没有显著改善。这种差异说明,新一轮林改提高了农户的森林经营和管护积极性,但对造林行为的影响有限。同时农户并没有因为林地面积增加而显著提高劳动力的投入强度。这种资本对劳动的替代与农户的非农就业行为密切相关。     

Layered sphere-shaped TiO2 capped with gold nanoparticles on structural defects and their catalysis of formaldehyde oxidation

We describe here a one-step method for the synthesis of Au/TiO₂ nanosphere materials, which were formed by layered deposition of multiple anatase TiO₂ nanosheets. The Au nanoparticles were stabilized by structural defects in each TiO₂ nanosheet, including crystal steps and edges, thereby fixing the Au–TiO₂ perimeter interface. Reactant transfer occurred along the gaps between these TiO₂ nanosheet layers and in contact with catalytically active sites at the Au–TiO₂ interface. The doped Au induced the formation of oxygen vacancies in the Au–TiO₂ interface. Such vacancies are essential for generating active oxygen species (*O⁻) on the TiO₂ surface and Ti^3 + ions in bulk TiO₂. These ions can then form Ti^3 +–O⁻–Ti^4 + species, which are known to enhance the catalytic activity of formaldehyde (HCHO) oxidation. These studies on structural and oxygen vacancy defects in Au/TiO₂ samples provide a theoretical foundation for the catalytic mechanism of HCHO oxidation on oxide-supported Au materials.