Atmospheric composition change research: Time to go post-normal?

For more than two decades a number of frameworks for scientific knowledge production are being proposed by science and technology researchers. They all advocate an extended involvement of non-specialists, in particular when it comes to knowledge production applicable to practical societal problems. We look to what extent these new frameworks have taken ground within a particular research community: the ACCENT Network of Excellence which coordinates European atmospheric chemistry and physics research applicable to air pollution and climate change. We did so by stimulating a debate through a “blog”, a survey and in-depth interviews with ACCENT scientists about the interaction between science, policy making and civil society, to which a great deal of ACCENT member contributed in writing or verbally. Most of them had interactions with policy makers and/or the general public, and they generally believe that interactions with spheres other than the scientific are needed. While such interactions give personal insight and satisfaction, they seem to have little impact on the goals and the practice of the scientific work itself. Extended frameworks of science production that go beyond the disciplinary mode seem to emerge at the level of individual scientists, yet they still need to find their way to the level of scientific project management. In this paper we discuss the justifications and barriers to implement a higher degree of extended knowledge integration in applied science projects such as ACCENT. It is felt that the community of atmospheric chemists and physicists is mature for such an implementation and recommendations are given to help and make this happen.     

Influence of tobacco smoke on carcinogenic PAH composition in indoor PM10 and PM2.5

Because of the mutagenic and/or carcinogenic properties, Polycyclic Aromatic Hydrocarbons (PAH), have a direct impact on human population. Consequently, there is a widespread interest in analysing and evaluating the exposure to PAH in different indoor environments, influenced by different emission sources. The information on indoor PAH is still limited, mainly in terms of PAH distribution in indoor particles of different sizes; thus, this study evaluated the influence of tobacco smoke on PM₁₀ and PM_2.5 characteristics, namely on their PAH compositions, with further aim to understand the negative impact of tobacco smoke on human health. Samples were collected at one site influenced by tobacco smoke and at one reference (non-smoking) site using low-volume samplers; the analyses of 17 PAH were performed by Microwave Assisted Extraction combined with Liquid Chromatography (MAE–LC). At the site influenced by tobacco smoke PM concentrations were higher 650% for PM₁₀, and 720% for PM_2.5. When influenced by smoking, 4 ring PAH (fluoranthene, pyrene, and chrysene) were the most abundant PAH, with concentrations 4600–21 000% and 5100–20 800% higher than at the reference site for PM₁₀ and PM_2.5, respectively, accounting for 49% of total PAH (Σ_PAH). Higher molecular weight PAH (5–6 rings) reached concentrations 300–1300% and 140–1700% higher for PM₁₀ and PM_2.5, respectively, at the site influenced by tobacco smoke. Considering 9 carcinogenic PAH this increase was 780% and 760% in PM₁₀ and PM_2.5, respectively, indicating the strong potential risk for human health. As different composition profiles of PAH in indoor PM were obtained for reference and smoking sites, those 9 carcinogens represented at the reference site 84% and 86% of Σ_PAH in PM₁₀ and PM_2.5, respectively, and at the smoking site 56% and 55% of Σ_PAH in PM₁₀ and PM_2.5, respectively. All PAH (including the carcinogenic ones) were mainly present in fine particles, which corresponds to a strong risk for cardiopulmonary disease and lung cancer; thus, these conclusions are relevant for the development of strategies to protect public health.     

Remediation procedure used for contaminated soil and underground water: A case study from the chemical industry

This is a case study of contamination by a non-aqueous phase liquid (NAPL) that leaked from a chemical plant. The remediation procedure adopted for the initial phase of the plume migration was a plastic diaphragm wall coupled with a series of water extraction wells designed to avoid environmental impact on the surrounding ecosystems. Monitoring has shown that the containment is successful, and additional measures that contribute to accelerating remediation have been adopted. The authors wished to investigate how remediation might be further enhanced. The use of in situ aeration coupled with a system of soil vapor extraction (AS/SVE) has been chosen, since the remediation of sites with characteristics similar to those in this study, if based exclusively on dissolved-phase control, would take several decades to be completed. The transport of contaminant plumes has been simulated by using an analytical model to evaluate the effectiveness of the natural attenuation of the contaminant. The results of the simulation have confirmed the limited effectiveness of the natural attenuation of the contaminant, as well as the effective increase of remediation that would occur if the AS/SVE system is applied. A sensitivity analysis that included several combinations of increments of parameters that correspond to the decay rate of the source and the dissolved plume has simulated what might happen if the AS/SVE system is implemented.     

Efficacy of vegetated buffer strips for retaining Cryptosporidium parvum

Overland and shallow subsurface hydrologic transport of pathogenic Cryptosporidium parvum oocysts from cattle feces into surface drinking water supplies is a major concern on annual grasslands in California's central and southern Sierra Nevada foothills. Soil boxes (0.5 m wide x 1.1 m long x 0.3 m deep) were used to evaluate the ability of grass vegetated buffer strips to retain 2 x 10(8) spiked C. parvum oocysts in 200-g fecal deposits during simulated rainfall intensities of 30 to 47.5 mm/h over 2 h. Buffers were comprised of Ahwahnee sandy loam (coarse-loamy, mixed, active, thermic Mollic Haploxeralfs; 78:18:4 sand to silt to clay ratio; dry bulk density = 1.4 g/cm(3)) set at 5 to 20% land slope, and >/=95% grass cover (grass stubble height = 10 cm; biomass = 900 kg/ha dry weight). Total number of oocysts discharged from each soil box (combined overland and subsurface flow) during the 120-min simulation ranged from 1.5 x 10(6) to 23.9 x 10(6) oocysts. Observed overall mean log(10) reduction of total C. parvum flux per meter of vegetated buffer was 1.44, 1.19, and 1.18 for buffers at 5, 12, and 20% land slope, respectively. Rainfall application rate (mm/h) was strongly associated with oocyst flux from these vegetated buffers, resulting in a decrease of 2 to 4% in the log(10) reduction per meter buffer for every additional mm/h applied to the soil box. These results support the use of strategically placed vegetated buffers as one of several management strategies that can reduce the risk of waterborne C. parvum attributable to extensive cattle grazing on annual grassland watersheds.     

Remediation with cyclodextrin: Recovery of the remedial agent by membrane filtration

Cyclodextrin‐enhanced flushing of contaminants from the subsurface is a promising innovative remediation technology. It will become more economically viable at more sites if methods can be developed to recover and reconcentrate the cyclodextrin solution after it has been flushed through an aquifer. The goal of this study was to determine if membrane technology is capable of meeting that need. Five membranes with different material properties were tested for this purpose in the laboratory. The results of these tests indicate that there are large differences both in the efficiency of these membranes to extract hydroxpropyl‐β‐cyclodextrin (HPCD) and their stability when exposed to trichloroethylene (TCE) at concentrations near aqueous solubility. Not only does the molecular weigh cutoff (MWCO) of a membrane determine if HPCD can be retained, but crucial selection criteria are the membrane's resistance and compatibility with TCE. Of the five membrane materials tested, only two (polymer composite membrane and polysulfone) met both these requirements. The polymer composite membrane (MPF‐44) showed reliable and stable HPCD recoveries (>95 percent) even when exposed to high TCE concentrations. The polysulfone membrane showed high HPCD recoveries, 88.5 ± 0.4 percent to 97 percent ±1 percent for ultrafiltration and nanofiltration membranes, respectively. However, membrane swelling and deterioration became a problem at high TCE concentrations (>1,000 mg/L). These problems diminished when the TCE concentration was less than 1 mg/L. Field tests demonstrated that batch mode treatment by ultrafiltration doubled the cyclodextrin concentration from 5 to 10 percent within three hours at a constant operating pressure of 13 psi. Under continuous single‐pass treatment conditions, cyclodextrin concentration also increased, although the rate of increase was much smaller than in batch mode. Overall, these tests showed that cyclodextrin recovery is possible under field conditions. © 2007 Wiley Periodicals, Inc.     

The fetal cerebellum. Pitfalls in diagnosis and management

Prenatal diagnosis of congenital and acquired cerebellar disorders is possible by the use of ultrasound (US) and magnetic resonance imaging (MRI). Although numerous studies have been conducted in this field, diagnostic uncertainties are still common in daily clinical practice. This review outlines five possible pitfalls in the diagnosis of fetal cerebellar disorders: confusion between different entities describing vermian pathologies (Dandy–Walker variant, vermian hypoplasia and vermian agenesis); premature diagnosis of abnormal vermian formation; difficulties in the ultrasonographic differentiation between the cerebellar hemispheres and the vermis; late development of cerebellar hypoplasia/atrophy and differential diagnosis of unilateral cerebellar findings. Copyright © 2009 John Wiley & Sons, Ltd.     

Environmental quality assessment combining sediment metal levels, biomarkers and macrobenthic communities: application to the óbidos coastal lagoon (Portugal)

Macroinvertebrate benthic communities are one of the key biological components considered for the assessment of benthic integrity in the context of the Water Framework Directive (WFD). However, under moderate contamination scenarios, the assessment of macrobenthic alterations at community level alone could be insufficient to discriminate the environmental quality of coastal and transitional waters. Keeping this in view, sediment quality of moderately contaminated sites in a coastal lagoon (óbidos lagoon, Portugal) was assessed by the combination of sediment metal levels, Carcinus maenas biomarkers (accumulated metals and oxidative stress responses) and macrobenthic communities. Two sites were selected in confined inner branches (BS and BB) and a third one in the middle lagoon (ML). The site BB presented slightly higher levels of metals in sediment but biological variables calculated for macrobenthic data were not significantly different between sites. The biotic index M-AMBI that is being applied to assess environmental quality of transitional waters in the scope of the WFD pointed either to high (site ML) or good quality status (BS and BB) in the selected sites. However, crabs from BB site presented significantly higher levels of Ni in hepatopancreas than those from ML and macrobenthic community structure was significantly different between BB and ML. Additionally, spatial differences were obtained for oxidative stress parameters suggesting that BB site presented stressors for crabs (higher GST and lower GSH_t at BB site). Factor analysis (PCA) integrating sediment contamination, biomarkers in crabs and macrobenthic data also distinguished BB site as the most environmentally disturbed. On the other hand, at ML site, some macrobenthic variables (equitability and polychaetes’ diversity) were found to be enhanced by current environmental conditions, suggesting the existence of a better sediment quality. Current results pointed to the usefulness of integrating macrobenthic community alterations with responses at organism level (bioaccumulation and biochemical endpoints) in order to increase the accuracy of environmental quality assessment in lagoon systems. Moreover, the application of different statistical methods was also found to be recommendable.     

The boom in mineral markets: How long might it last?

The commodity price boom that emerged in 2004 has proved far more persevering than its predecessors of 1950 and 1973. Some analysts have suggested that it may represent the start of a “supercycle” caused by the voracious raw materials demand from China and other emerging economies, with prices remaining high for 20-30 years. We offer an alternative explanation. For a variety of reasons, the establishment of new capacity in minerals and energy to match the accelerated demand trends is more time consuming than commonly assumed, and may take a decade or longer. As soon as the new capacity is in place, however, the boom will be punctuated. Prices may collapse much earlier in the event of a severe recession that cuts the growth in commodity demand.