利用重组大肠杆菌SOS法评价污水厂出水的遗传毒性以及工艺去除效果

SOS/umu测试法被广泛应用于化合物和复杂混合物遗传毒性的评价,由于该技术所用菌种为致病菌且操作步骤繁琐等原因,制约了技术的推广应用。研究建立了基于重组大肠杆菌SOS效应的水质遗传毒性检测方法(专利号:ZL201110022476.1),应用该方法评价了某市4座污水厂出水的直接遗传毒性效应,同时以污水处理一厂为例考察了直接遗传毒性效应的季节变化规律以及不同的工艺对水中直接遗传毒性物质的去除情况。结果显示:各污水厂出水均表现出一定的直接遗传毒性,对应的4-NQO毒性当量浓度范围为0.018~0.514 mg·L-1;一年四季中夏季进出水直接遗传毒性效应最高,现有工艺中生化处理工艺段对直接遗传毒性去除效果最佳,去除率为33.33%。该方法操作便利、检测敏感性较高、操作危险性较低,可用于水中直接遗传毒性效应的测试。     

阿维菌素对中华绒螯蟹肝胰腺氧化胁迫效应和组织结构的影响

采用半静态染毒法,研究不同浓度(1.6、8.0、16.0μg·L-1)阿维菌素在胁迫中华绒螯蟹12、24、48、96 h时肝胰腺超氧化物歧化酶(SOD)、过氧化氢酶(CAT)活性和丙二醛(MDA)积累量等氧化胁迫相关指标的变化;并在胁迫60 d时,记录各实验组和对照组中华绒螯蟹肝胰腺颜色的变化并进行组织病理观察。3个阿维菌素浓度组为实验组,空白组和溶剂组为对照组。结果表明在整个实验过程中空白组和溶剂组各个时间点各项指标之间无显著差异(P>0.05);低浓度(1.6μg·L-1)组SOD和CAT活力变化不显著(P>0.05);中浓度(8.0μg·L-1)组SOD和CAT活力变化趋势一致,持续被诱导,SOD活力在24 h以后显著高于空白组(P<0.01),CAT活力在48 h以后显著高于空白组(P<0.01);高浓度(16.0μg·L-1)组SOD和CAT活力在12 h~24 h之间变化趋势一致,表现为显著升高(P<0.05),但是在48 h之后,SOD活力显著下降(P<0.05);96 h时,高浓度组SOD活力显著低于空白组(P<0.01),而CAT活力显著高于空白组(P<0.01);在整个实验过程中各实验组MDA积累量逐渐增加,高浓度组氧化胁迫指标的变化幅度大于低浓度组。胁迫60 d时,取样观察可见对照组中华绒螯蟹肝胰腺正常,各实验组中华绒螯蟹肝胰腺发生了不同程度的病变,肝胰腺颜色由最开始的橘黄色变成了淡黄色、黄白色甚至白色,高、中、低各浓度组肝胰腺白化所占的比例分别是66.6%、57.1%和25.0%。组织病理分析显示,淡黄色肝胰腺的病理变化主要是B细胞数量减少,肝胰腺上皮细胞部分肿大并出现空泡;黄白肝病理观察可见肝胰腺上皮细胞中空泡数量增多,体积增大,且空泡内出现内容物,细胞核固缩;白肝的病理表现主要是基膜增厚,上皮细胞大量脱落,散落在管腔中,空泡数量进一步增多,肝胰腺的生理功能受损。由此得出,阿维菌素会对中华绒螯蟹肝胰腺造成氧化胁迫和组织损伤,且阿维菌素和对肝胰腺的氧化胁迫效应和组织结构损伤程度有一定的剂量-效应关系。     

3种典型微生物农药对家蚕的毒性研究

苏云金芽孢杆菌、球孢白僵菌以及棉铃虫核型多角体病毒是细菌类、真菌类和病毒类微生物农药的典型代表。为了明确微生物农药对家蚕的毒性影响,选取以上3种典型微生物农药,分别探究其对家蚕的毒性。结果显示:苏云金杆菌原药对家蚕LC50值为1.33×105CFU·m L-1;球孢白僵菌原药对家蚕LC50值为1.14×106CFU·m L-1;棉铃虫核型多角体病毒母药对家蚕LC50值大于1.00×108PIB·m L-1。与此同时,通过进一步试验,明确了以上3种微生物农药对家蚕结茧率、死笼率、全茧量、茧层量等关键指标的影响。结果显示:除了棉铃虫核型多角体病毒母药,高浓度苏云金杆菌原药、球孢白僵菌原药对家蚕的结茧率和死笼率均具有显著影响;3种微生物农药对家蚕产茧能力指标全茧量、茧层量以及蛹重均无显著性影响。     

Investigation of the accumulation of ash,heavy metals,and polycyclic aromatic hydrocarbons to assess the stability of lysis–cryptic growth sludge reduction in sequencing batch reactor

The accumulation of ash, heavy metals, and polycyclic aromatic hydrocarbons (collectively called potential accumulating substances, PAS) was evaluated to ascertain the stability of lysis–cryptic growth sludge reduction process (LSRP) for municipal sludge treatment. One sequencing batch reactor (SBR) incorporated with homogenization was run to test the LSRP and another SBR as a control. The continuous monitoring results for 2 months showed that the ash and heavy metals slightly increased, and the polycyclic aromatic hydrocarbons decreased by 18.0%, indicating that there may be negligible accumulations during the LSRP. Their accumulations met pattern I, as demonstrated by statistical analysis, proving no PAS accumulation for LSRP. This was further confirmed by sludge activity and system performance. Moreover, the mechanism for no PAS accumulation was discussed. It was concluded that the LSRP was stable with no worries about PAS accumulation under the operational conditions.     

De novo formation of dioxins from milled model fly ash

Environmental Science and Pollution Research - Municipal solid waste incineration (MSWI) fly ash has been classified as hazardous waste and needs treatment in an environmentally safe manner....     

Heavy metal (Cu,Cd, Pb,Cr) washing from river sediment using biosurfactant rhamnolipid

Heavy metal-contaminated sediments posed a serious threat to both human beings and environment. A biosurfactant, rhamnolipid, was employed as the washing agent to remove heavy metals in river sediment. Batch experiments were conducted to test the removal capability. The effects of rhamnolipid concentration, washing time, solution pH, and liquid/solid ratio were investigated. The speciation of heavy metals before and after washing in sediment was also analyzed. Heavy metal washing was favored at high concentration, long washing time, and high pH. In addition, the efficiency of washing was closely related to the original speciation of heavy metals in sediment. Rhamnolipid mainly targeted metals in exchangeable, carbonate-bound or Fe-Mn oxide-bound fractions. Overall, rhamnolipid biosurfactant as a washing agent could effectively remove heavy metals from sediment.

     

Microbial community composition and electricity generation in cattle manure slurry treatment using microbial fuel cells: effects of inoculum addition

Environmental Science and Pollution Research - Microbial fuel cell (MFC) is a sustainable technology to treat cattle manure slurry (CMS) for converting chemical energy to bioelectricity. In this...     

Are we planning for sustainable disaster recovery? Evaluating recovery plans after the Wenchuan earthquake

This article examines local recovery plans that were created in response to the Wenchuan earthquake and then suggests ways that planners can better apply the concept of sustainability to the recovery process. We utilize a plan evaluation protocol to analyze 16 recovery plans in counties and towns that were severely affected by the earthquake. We also conducted semi-structured interviews with public officials and planners, with the qualitative data gleaned from these interviews being used to supplement the plan quality assessment. The results reveal that local recovery plans do not appear to have incorporated sufficiently the concepts of sustainability. We conclude the paper with the following recommendations: emphasizing sustainability as a policy priority during vision and goal development; developing solid databases and planning techniques; designing a diversified set of regulatory- and incentive-based policy tools suitable for local governments; enhancing social and institutional learning; and further integrating multi-level and interagency governmental units.     

太阳翼驱动机构的扰振力矩测试与分析

为了研究太阳翼驱动机构(solar array drive assembly,SADA)驱动太阳翼运行期间所产生的扰振力矩特性,设计了一套地面测试系统,包括应变式微振动测试平台、柔性负载以及模拟SADA在轨无重力工作环境的重力卸载装置。阐述了所设计测试系统的工作原理,并利用该测试系统进行了试验测试。测试结果表明:SADA驱动柔性负载运行期间所产生扰振力矩的扰振频率成分主要包含两部分,即:1)SADA驱动柔性负载耦合系统的低阶扭转固有频率;2)SADA电脉冲信号的输入频率及其高阶谐波。     

胶合竹材GluBam甲醛释放影响因素的气候箱实验与分析

胶合竹材GluBam的甲醛释放情况是现代竹结构住宅环保性的一个重要方面,也是竹结构住宅推广中最受关注的指标之一。采用1 m3气候箱对温度、相对湿度和封边情况与GluBam的甲醛释放量和释放速率的相关关系进行了测试,并以一阶单衰减模型为基础提出了GluBam的甲醛释放分析模型。测试和分析结果表明:GluBam板材在各模拟条件下甲醛浓度峰值均小于规范要求;初始甲醛释放量E0和衰减率常数k可以用来评价GluBam的甲醛释放特征;GluBam的醛释放量和释放速率随环境温度和湿度增加而显著增大,且温度因素的影响更大;封边处理可以有效降低GluBam板材的甲醛释放量。