Factors and values of willingness to pay for improved construction waste management--a perspective of Malaysian contractors

Malaysia is facing an increase in the generation of waste and of accompanying problems with the disposal of this waste. In the last two decades, extensive building and infrastructure development projects have led to an increase in the generation of construction waste material. The construction industry has a substantial impact on the environment, and its environmental effects are in direct relation to the quality and quantity of the waste it generates. This paper discusses general characteristics of the construction contractors, the contractors' willingness to pay (WTP) for improved construction waste management, determining factors which affect the amount of their willingness to pay, and suggestions and policy implications in the perspective of construction waste management in Malaysia. The data in this study is based on contractors registered with the construction industry development board (CIDB) of Malaysia. Employing the open ended contingent valuation method, the study assessed the contractors' average maximum WTP for improved construction waste management to be RM69.88 (1US$=3.6 RM) per tonne of waste. The result shows that the average maximum WTP is higher for large contractors than for medium and small contractors. The highest average maximum WTP value is RM88.00 for Group A (large contractors) RM78.25 for Group B (medium-size contractors) and RM55.80 for Group C (small contractors). One of the contributions of this study is to highlight the difference of CIDB registration grade in the WTP for improved construction waste management. It is found that contractors' WTP for improved waste collection and disposal services increases with the increase in contractors' current paid up capital. The identified factors and determinants of the WTP will assist the formulation of appropriate policies in addressing the construction waste problem in Malaysia and indirectly improve the quality of construction in the country.     

Government management and overexploitation of groundwater resources: absence of local community initiatives in Ardabil plain-Iran

Although mismanagement of groundwater resources has resulted in their destruction over centuries, climate change is speeding up this process more than ever. On the one hand, urgent action by government bodies is needed to address the challenge. On the other hand, a vast body of literature proves that bottom-up collective action, although requiring a longer time period, is a better solution to manage such resources. This research aims to address this dilemma. The groundwater resource in Ardabil plain in Iran, which has long been managed solely through government intervention, has been chosen as a case study to explore the opportunities and limitations of managing a critically endangered area from a common pool resource perspective. Our study suggests that managing Ardabil groundwater resources should be conducted on two scales. The bottom-up institutional agreements should take place at village scale while the government should stay in charge of the overall organization at plain scale.     

Reliable method for prediction of the flash point of various classes of amines on the basis of some molecular moieties for safety measures in industrial processes

This work presents a novel, reliable and simple method of estimating the flash point of various types of flammable amines, which are important for safety measures in industrial processes. Different amines include aliphatic amines such as primary, secondary, tertiary and cyclic amines as well as aromatic amines and hetero arenes containing nitrogen heteroatom. The proposed correlation is based on the contribution of some specific molecular moieties and functional groups, which can easily be used for any types of amines. Intermolecular forces are important in the new method, which are counted by two increasing and decreasing parameters. The root mean square (rms) deviation is 18 K for different classes of amines including 133 diverse compounds. The estimated flash points have been compared with one of the best available predictive methods, which gives much lower value of the rms deviation.     

Photooxidative removal of the herbicide Acid Blue 9 in the presence of hydrogen peroxide: modeling of the reaction for evaluation of electrical energy per order (EEO)

The present work deals with photooxidative removal of the herbicide, Acid Blue 9 (AB9), in water in the presence of hydrogen peroxide (H₂O₂) under UV light illumination (30 W). The influence of the basic operational parameters such as amount of H₂O₂, irradiation time and initial concentration of AB9 on the photodegradation efficiency of the herbicide was investigated. The degradation rate of AB9 was not appreciably high when the photolysis was carried out in the absence of H₂O₂ and it was negligible in the absence of UV light. The photooxidative removal of the herbicide was found to follow pseudo-first-order kinetic, and hence the figure-of-merit electrical energy per order (E_Eo) was considered appropriate for estimating the electrical energy efficiency. A mathematical relation between the apparent reaction rate constant and H₂O₂ used was applied for prediction of the electricity consumption in the photooxidative removal of AB9. The results indicated that this kinetic model, based on the initial rates of degradation, provided good prediction of the E_Eo values for a variety of conditions. The results also indicated that the UV/H₂O₂ process was appropriate as the effective treatment method for removal of AB9 from the contaminated wastewater.     

An Experimental Study on Productivity and Quality Improvement of Horizontal Continuous Casting Process

The aim of the current work is to provide information on how to improve the productivity and quality in the Horizontal Continuous Casting process (HCC). After a first numerical 2D/3D survey about the solidification in the HCC, an experimental investigation has been carried out to validate numerical results. Some casting parameters have been measured and collected: inlet and outlet temperatures, flow rate, heat flux and casting temperature. The study results lead to a correlation between these casting parameters and the casting quality. To obtain the best quality for each alloy, a set of operating parameters has been proposed. There is a very good agreement between the current results and earlier numerical results. Also based on the results, one can gain an insight on the productions of each casting machine and the grades of its quality.     

Extraction of Lignosulfonate from Black Liquor into Construction of a Magnetic Lignosulfonate-Based Adsorbent and Its Adsorption Properties for Dyes from Aqueous Solutions

Journal of Polymers and the Environment - Lignosulfonate, one of the lignin derivatives, was extracted from the black liquor as a byproduct of the wood and paper industry. It was used to prepare...     

Assessment of food-energy-environmental pollution nexus in Iran: the nonlinear approach

Environmental Science and Pollution Research - Iran’s agricultural production has expanded significantly in recent years. Environmental pollution caused by the use of energy and chemical...     

Detection of SARS-CoV-2 in the indoor air of intensive care unit (ICU) for severe COVID-19 patients and its surroundings: considering the role of environmental conditions

Environmental Science and Pollution Research - There is ambiguity about the airborne transmission of the SARS-CoV-2. While a distance of 6 feet is considered a safe physical distance, new findings...     

Estimation of bacteriological levels in surface water samples to evaluate their contamination profile

The present work deals with the assessment of bacteriological contamination along with some physico-chemical parameters of water samples from Lahore canal. ANOVA showed that the observed p values of log-transformed viable plate counts, total suspended solids, turbidity, and biological oxygen demand are 0.000, 0.000, 0.000, and 0.000, respectively, which are <0.05, while the p value of total coliforms, total fecal coliforms, and Escherichia coli are 0.728, 0.827, and 0.081, respectively which are >0.05. Significant correlation was observed between log-transformed viable plate counts (CFU), biological oxygen demand, total suspended solids, and turbidity. Further regression analysis revealed that simple line regression model is fit for log-transformed viable plate counts and total suspended solids, log-transformed viable plate counts and turbidity, turbidity and total suspended solids, biological oxygen demand and total suspended solids, biological oxygen demand and log-transformed viable plate counts, and biological oxygen demand and turbidity.