Distribution of Al-, Fe- and Mn-pools and their correlation in soils from two acid deposition small catchments in Hunan, China

Distribution of Al-, Fe- and Mn-pools was investigated in five forest soil profiles (consisting of four horizons) in each of two Hunan catchments (BLT and LKS) where acid deposition has been considered critical. Al- and Fe-pools were higher in BLT than those in LKS, but Mn-pools much lower in BLT. Mn-pools vary from topsoils to bottom soils, but there are different trends for different Mn speciation. Al- and Fe-pools, except amorphous Fe_ox, were positively correlated to contents of soil organic matter (OM) showed by the loss on ignition in the two catchments. Accumulation of Al- and Fe-pools may occur in the area where soil organic matter was enriched (e.g. in top soil and rhizosphere soil). However, no direct correlation is observed between Mn and OM. Acidic atmospheric deposition may affect transforming among speciations of Al-, Fe- and Mn-pools and leaching of soil Al, Fe and Mn through formation of soluble organo-metal dissolved Al which was potentially toxic, increased. There were significant correlations between Al-pools complexes or change of oxidation–reduction conditions. Mn_ex (exchangeable Mn) and Mn_ox (amorphous and organic Mn) were highly linearly correlation with soil pH values at LKS but at BLT. Under acid deposition, the availability of the nutrient Fe increased with the amount of dissolved Al, which was potentially toxic, in the two catchments. There are no significant correlations between Al_ex (exchangeable Al) and Mn_ex, Fe_ex (exchangeable Fe) and Mn_ex in this work, indicating potentially toxic Mn increase seldom accompanying with Al increase in the two catchments.     

Bayesian networks make LOPA more effective,QRA more transparent and flexible,and thus safety more definable!

Quantitative risk analysis is in principle an ideal method to map one’s risks, but it has limitations due to the complexity of models, scarcity of data, remaining uncertainties, and above all because effort, cost, and time requirements are heavy. Also, software is not cheap, the calculations are not quite transparent, and the flexibility to look at various scenarios and at preventive and protective options is limited. So, the method is considered as a last resort for determination of risks. Simpler methods such as LOPA that focus on a particular scenario and assessment of protection for a defined initiating event are more popular. LOPA may however not cover the whole range of credible scenarios, and calamitous surprises may emerge.In the past few decades, Artificial Intelligence university groups, such as the Decision Systems Laboratory of the University of Pittsburgh, have developed Bayesian approaches to support decision making in situations where one has to weigh gains and costs versus risks. This paper will describe details of such an approach and will provide some examples of both discrete random variables, such as the probability values in a LOPA, and continuous distributions, which can better reflect the uncertainty in data.     

Transfer of powders into flammable solvents overview of explosion hazards and preventive measures

This paper evaluates and analyses the explosion hazards associated with transfer operations of powders into large containers, hoppers and reactors, which may also contain flammable solvent vapours. The formation and characteristics of explosive atmospheres and the occurrence of process inherent ignition sources, such as static electricity are described. The most commonly applied preventive measures and technical equipment are outlined and discussed including their advantages and disadvantages.     

RecoPhos: Full-scale fertilizer production from sewage sludge ash

The substitution potential of sewage sludge for German primary phosphate imports has been estimated as 40%. Yet, a marketable option for the full scale recovery has been lacking. This study focuses on a full-scale process for the manufacture of a P-fertilizer from sewage sludge ash (SSA) adapted from the production of Triple Superphosphate. Given (i) conformity of the input with phosphate ores mined from sedimentary deposits, (ii) comparability of the product with a commercially available P-fertilizer regarding contaminant levels, P-fractionation and yield effects, and (iii) compliance of the output with the German Fertilizer Ordinance the RecoPhos P 38 fertilizer was discharged from the waste legislation regime. The fertilizer is currently being produced at a rate of 1000 tonnes per month and sold at a competitive price.     

Evaluation criteria for AIS 1 neck injuries in frontal impacts--a parameter study combining field data and Madymo modeling

Two situations with an expected higher AIS 1 neck injury rate in frontal impact were compared to a reference situation using a Madymo human body model in three different sitting postures and four different crash pulses. The two situations were reduced occupant weight and occupant with initial forward arm resistance, respectively. Occupant neck motion phases were identified and corresponding possible evaluation criteria were evaluated within the phases. Typical neck kinematics was seen for the two different situations. Occupants of lower weight had a more extended neck in the initial protraction phase and also a generally more pronounced upper neck link angle. Occupants with initial arm resistance had generally greater lower neck link angle at the time when the upper neck link angle was straight. No evaluation criteria reflected the anticipated AIS 1 neck injury rate consistently. In the initial protraction phase, NICmin correlated to expected injury outcome in almost half of the cases. In the protraction-flexion shift phase, Nkm, Nij, upper neck shear force and neck tension force reflected anticipated severity outcome to some extent. In the flexion phase, upper and lower neck extension correlated to anticipated AIS 1 neck injury rate only to a minor extent. The different sitting postures were more influential than the different crash pulses, emphasizing the importance of not only considering the spectra of impact severity but also differences in sitting postures in safety system development and evaluation.     

Tire blow-outs and motorway accidents

During the period from 1996 to 2002, 60,397 vehicles were involved in crashes with property damage and/or injury on a French motorway network of 2000 km. It was observed that 6.7% of these accidents involved tire blow-outs. In 87% of cases, only one vehicle was involved in the accident. Tire blow-outs occurred in 6.5% of cars that represented more than 80% of the vehicles involved in crashes. The occurrence of this phenomenon is very high for vans (22%), though it concerns trucks less (2.5%). The proportion of tire blow-outs decreased from 1997, when it was 8.0%, to 5.9% in 2002. However, two main facts require examination: (1) On inter-urban motorways, crashes involving blow-outs of rear tires occur four times more frequently than for blow-outs of front tires. (2) The frequency of tire blow-outs is especially high for vans, and almost always involves rear tires. This higher frequency for rear tires is the result of two phenomena, which are indistinguishable given the data available: firstly, a four-wheel vehicle is more difficult to control if a blow-out occurs on a rear tire (confirmed experimentally); secondly, rear tires may be in poor condition more often than front tires, and so more prone to blow-outs. Consequently, users are strongly recommended to install the best tires on rear wheels. In practice, if only the front tires are replaced, which often occurs because they tend to be worn out more quickly than the rear ones (especially for front wheel drive vehicles), it is necessary to move the rear tires to the front and fit the new ones on the rear wheels. Very interesting technological developments are in progress that should reduce the number of tire blow-outs. However, considering the time necessary to renew the number of cars on the roads, this very simple and inexpensive recommendation should apply to all cars and especially to vans.     

A methodology for assessing blast protection in explosive ordnance disposal bomb suits.

To reduce human casualties associated with explosive ordnance disposal, a wide range of protective wear has been designed to shield against the blast effects of improvised explosive devices and munitions. In this study, 4 commercially available bomb suits, representing a range of materials and armor masses, were evaluated against 0.227 and 0.567 kg of spherical C-4 explosives to determine the level of protection offered to the head, neck, and thorax. A Hybrid III dummy, an instrumented human surrogate [1], was tested with and without protection from the 4 commercially available bomb suits. 20 tests with the dummy torso mounted to simulate a kneeling position were performed to confirm repeatability and robustness of the dummies, as well as to evaluate the 4 suits. Correlations between injury risk assessments based on past human or animal injury model data and various parameters such as bomb suit mass, projected area, and dummy coverage area were drawn.     

Insectivorous birds consume an estimated 400–500 million tons of prey annually

In this paper, we present an estimate of the predation impact of the global population of insectivorous birds based on 103 (for the most part) published studies of prey consumption (kg ha^?1 season^?1) of insectivorous birds in seven biome types. By extrapolation—taking into account the global land cover of the various biomes—an estimate of the annual prey consumption of the world’s insectivorous birds was obtained. We estimate the prey biomass consumed by the world’s insectivorous birds to be somewhere between 400 and 500 million metric tons year^?1, but most likely at the lower end of this range (corresponding to an energy consumption of ≈?2.7?×?10¹⁸ J year^?1 or ≈?0.15% of the global terrestrial net primary production). Birds in forests account for >?70% of the global annual prey consumption of insectivorous birds (≥?300 million tons year^?1), whereas birds in other biomes (savannas and grasslands, croplands, deserts, and Arctic tundra) are less significant contributors (≥?100 million tons year^?1). Especially during the breeding season, when adult birds feed their nestlings protein-rich prey, large numbers of herbivorous insects (i.e., primarily in the orders Coleoptera, Diptera, Hemiptera, Hymenoptera, Lepidoptera, and Orthoptera) supplemented by spiders are captured. The estimates presented in this paper emphasize the ecological and economic importance of insectivorous birds in suppressing potentially harmful insect pests on a global scale—especially in forested areas.