A source classification framework supporting pollutant source mapping,pollutant release prediction,transport and load forecasting,and source control planning for urban environments

Purpose

Implementation of current European environmental legislation such as the Water Framework Directive requires access to comprehensive, well-structured pollutant source and release inventories. The aim of this work was to develop a Source Classification Framework (SCF) ideally suited for this purpose.

Methods

Existing source classification systems were examined by a multidisciplinary research team, and an optimised SCF was developed. The performance and usability of the SCF were tested using a selection of 25 chemicals listed as priority pollutants in Europe.

Results

The SCF is structured in the form of a relational database and incorporates both qualitative and quantitative source classification and release data. The system supports a wide range of pollution monitoring and management applications. The SCF functioned well in the performance test, which also revealed important gaps in priority pollutant release data.

Conclusions

The SCF provides a well-structured approach for European pollutant source and release classification and management. With further optimisation and demonstration testing, the SCF has the potential to be fully implemented throughout Europe.

     

Single and multiple stressor effect of road deicers and Cu on Atlantic salmon (Salmo salar) alevins from hatching till swim-up

Road salts are frequently used for deicing of roads in the Nordic countries. During snow-melt, the road run-off containing high concentrations of road salt and various metals such as Cu remobilized from sand, silt and dust may negatively influence organisms in downstream receiving water bodies. The present work focuses on the impact of road salt(NaCl) and Cu, separately and in mixtures on Atlantic salmon alevins from hatching till swim-up. The results showed that high road salt concentrations could induce a series of negative effects in alevins such as reduced growth, deformities, delayed swim-up and mortality. For alevins exposed to all tested road salt concentrations(100–1000 mg/L),mortality was significantly higher compared to control. In exposure to Cu solutions(5–20 μg Cu/L), no effects on growth, morphology, swim-up or mortality of alevins compared to control were observed. In mixture solutions(road salt and Cu), ultrafiltration of the exposure water demonstrated that only 20%–40% of Cu was present as positively charged low molecular mass(LMM) Cu species assumed to be bioavailable. When exposed to road salt and Cu mixtures, negative effects in alevins such as reduced growth, deformities,delayed swim-up and mortality were observed. The overall results indicated that the road salt application could seriously affect sensitive life stages of Atlantic salmon, and application of road salt should be avoided during the late winter–early spring period.     

Decrease of time for pathogen inactivation in alkaline disinfection systems using pressure.

From field studies conducted by Tulane University (New Orleans, Louisiana), efficiency of advanced alkaline disinfection in closed systems was found to depend on ammonia concentration, pH, exposure time, temperature, total solids content, pretreatment storage time, and mixing effectiveness. In this study of a closed alkaline system, an additional pathogen stressor pressure was tested. The effect of the alkaline dosing has been assessed for dewatered raw and aerobically and anaerobically digested municipal sludge cake that produce un-ionized ammonia at concentrations of 0.05 to 2% on a dry-weight basis. Inactivation of Ascaris suum eggs increased from 50 to 99% as the temperature was increased from 40 to 55 degrees C, thus achieving Class A levels. The systems studied were compared with an alkaline process operated under open conditions, which limited the concentrations of ammonia available because of Henry's Law. Under a closed pressurized system, the effect of un-ionized ammonia was greatly increased, and the resulting time required for inactivation was reduced from hours or days to minutes. In the next few years, it is expected that alkaline disinfection of biosolids will be optimized in relation to the factors stated above, at much lower doses of the alkaline agents. The closed-system alkaline processes that will be developed will be more energy-efficient, cost-effective, and have full control of potential odorous emissions.     

Low-temperature inactivation of fecal coliforms in sludge digestion.

The goal of this research was to demonstrate the ability to achieve Class A pathogen standards in nonthermophilic acid digesters. It was proposed that the key mechanism responsible for fecal coliform inactivation was the presence of un-ionized volatile fatty acids. Lab-scale acid digesters were assembled and operated in a batch mode for 5 days at mesophilic (38 degrees C) and low-mesophilic (21 degrees C) temperatures and at different solids concentrations. The key factor recognized for successful pathogen inactivation was pH, which is also the main factor driving the shift in organic acids toward the un-ionized form. Compared to conventional mesophilic acid digestion, low-mesophilic acid digestion was effective in fecal coliform inactivation because the process maintained lower pH throughout the duration of the experiment, offered continuous release of organic acids, and showed higher concentrations of organic acids in un-ionized form, including acetate, propionate, butyrate, and valerate.     

Bestimmung von Mineralölkohlenwasserstoffen in Bodenproben mit Hilfe der Dünnschichtchromatographie

A thin-layer chromatographic method for the determination of mineral oil hydrocarbons (aliphatic compounds and naphtenes) of medium and low volatility in soil samples is presented which is based on their separation and quantitative determination. The extraction of the soil samples is effected by means of an n-hexane-acetone mixture (10∶1) supported by ultrasonics. The evaluation can be made visually or densitometrically by means of a thin-layer scanner. The applicability and restrictions of the method are shown. The advantage of the method lies in its low requirements pertaining to apparatus and chemicals, as well as in its rapidness which makes it suitable for quick in-situ analyses as, for example, for the assessment of the mineral oil content of a contaminated site.