Monitoring plastic ingestion by the northern fulmar Fulmarus glacialis in the North Sea

The abundance of plastics in stomachs of northern fulmars from the North Sea is used in the OSPAR Ecological Quality Objective (EcoQO) for marine litter. The preliminary EcoQO defines acceptable ecological quality as the situation where no more than 10% of fulmars exceed a critical level of 0.1 g of plastic in the stomach. During 2003-2007, 95% of 1295 fulmars sampled in the North Sea had plastic in the stomach (on average 35 pieces weighing 0.31 g) and the critical level of 0.1 g of plastic was exceeded by 58% of birds, with regional variations ranging from 48 to 78%. Long term data for the Netherlands since the 1980s show a decrease of industrial, but an increase of user plastics, with shipping and fisheries as the main sources. The EcoQO is now also used as an indicator for Good Environmental Status in the European Marine Strategy Framework Directive.     

The use of environmental metabolomics to determine glyphosate level of exposure in rapeseed (Brassica napus L.) seedlings

Metabolic profiling in plants can be used to differentiate between treatments and to search for biomarkers for exposure. A methodology for processing Ultra-High-Performance Liquid Chromatography-Diode-Array-Detection data is devised. This methodology includes a scheme for selecting informative wavelengths, baseline removal, retention time alignment, selection of relevant retention times, and principal component analysis (PCA). Plant crude extracts from rapeseed seedling exposed to sublethal concentrations of glyphosate are used as a study case. Through this approach, plants exposed to concentrations down to 5 μM could be distinguished from the controls. The compounds responsible for this differentiation were partially identified and were different from those specific for high exposure samples, which suggests that two different responses to glyphosate are elicited in rapeseed depending on the level of exposure. The PCA loadings indicate that a combination of other metabolites could be more sensitive than the response of shikimate to detect glyphosate exposure.     

CFD model simulation of dispersion from chlorine railcar releases in industrial and urban areas

To assist in emergency response decisions and planning in case of releases of pressurized liquefied chlorine from railroad tank cars in industrial sites and cities, the FLACS Computational Fluid Dynamics (CFD) model has been used to simulate the transport and dispersion of the dense chlorine cloud. Two accident locations are studied: an actual railcar accident at an industrial site in Festus, MO, and a hypothetical railcar accident at a rail junction in the Chicago urban area. The results show that transport of a large dense gas release at ground level in an industrial site or large city could initially extend a hundred meters or more in the upwind and crosswind directions. The dense cloud may follow terrain drainage, such as river channels. Near the source, the obstacles tend to slow down the dense gas cloud and may constrain it and cause increased concentrations. Farther downwind, the obstacles may cause enhanced mixing and dilution once the cloud has grown larger. In some cases, significant amounts of cloud mass may become “trapped” in obstacle wakes for many minutes after the main cloud has passed. Although the CFD model can account for the details of the flow and dispersion much better than standard widely-used simple dense gas models, many similarities are found among the various models in their simulated variations with downwind distance of the maximum cloud centerline concentration.     

Relative Costs and Benefits of a Continuous and a Periodic Forest Inventory in Minnesota

We show that the Annual Forest Inventory System (AFIS) being developed by the USDA Forest Service and tested in the state of Minnesota is no more costly than the periodic Minnesota forest inventory (12 year measurement cycle). Since very useful results could be generated with AFIS every 4 years in addition to the results from the periodic survey, a continuous inventory would be cost effective. Periodic surveys yield more precise estimates within the first few years of the full survey but afterwards the annual survey would be more precise. Where the changeover in precision occurs still needs to be determined. This cost-neutral advantage of AFIS is quite important to note since the USFS has decided to go to annualized inventories such as AFIS this year.     

Do males and females differ in the feeding of large and small siblings? An experiment with the bluethroat

Males and females have been reported to differ in their feeding of large and small siblings in several species of birds. According to recent hypotheses, this phenomenon may be related to a sexual conflict over avian hatching patterns. We designed an experiment to test for the existence of such a sex difference by manipulating nestling size hierarchies of the bluethroat (Luscinia s. svecica) in two directions; half the broods were “asynchronized” to yield large size-differences within broods and the other half were “synchronized” to yield small size-differences. In all broods, nestlings were categorized as being either large or small according to body mass. We recorded male and female food distribution by video early (day 4 after hatching) and late (day 8) in the nestling period. Males and females did not differ in their distribution of food among different-sized nestlings. With large size-differences, both males and females fed large nestlings nearly twice as often as small ones. In contrast, when the size-differences were small, food was more evenly distributed among nestlings. Early in the nestling period, males fed more nestlings during each feeding visit than did females. Our finding that male and female bluethroats do not differ in the feeding of large and small siblings is in contrast to most previous studies. Variation in costs and benefits to males and females from feeding different-sized nestlings, and restrictions to parental choice due to nestling interactions, may explain interspecific variation. Received: 27 June 1997 / Accepted after revision: 26 January 1998     

Microbial degradation pathways of the herbicide dichlobenil in soils with different history of dichlobenil-exposure

This is the first detailed study of metabolite production during degradation of the herbicide 2,6-dichlorobenzonitrile (dichlobenil). Degradation of dichlobenil and three potential metabolites: 2,6-dichlorobenzamide (BAM), 2,6-dichlorobenzoic acid (2,6-DCBA) and ortho-chlorobenzamide (OBAM) was studied in soils either previously exposed or not exposed to dichlobenil using a newly developed HPLC method. Dichlobenil was degraded in all four soils; BAM and 2,6-DCBA were only degraded in soils previously exposed to dichlobenil (100% within 35-56 days and 85-100% in 56 days, respectively), and OBAM in all four soils (25-33% removal in 48 days). BAM produced from dichlobenil was either hydrolyzed to 2,6-DCBA or dechlorinated to OBAM, which was further hydrolyzed to ortho-chlorobenzoic acid. BAM was rapidly mineralized in previously exposed soils only. All potential metabolites and the finding that BAM was a dead-end metabolite of dichlobenil in soils not previously exposed to dichlobenil needs to be included in risk assessments of the use of dichlobenil.     

Composition of source-sorted municipal organic waste collected in Danish cities

Source-sorted municipal organic waste from different dwelling types in five Danish cities was sampled during one year. The samples were from permanent, full-scale systems or temporary, experimental systems for collection of source-sorted municipal organic waste. Pre-treatment of the organic waste prior to biological treatment was used in all cities to remove foreign objects and provide size reduction. All sampling was performed after pre-treatment in order to obtain more homogeneous and representative samples. The sampling included both the pre-treated waste and the reject from the pre-treatment allowing for estimation of the composition of the original waste. A total of 40 waste samples were chemically characterised with respect to 15 parameters. The waste generally consisted of around 88% VS of which an average of 80% was easily degradable. The average content of N, P and K in the dry matter of the organic waste was 2.5%, 0.4% and 0.9%, respectively. A general analysis of variance was applied to show the influence of the collection system, dwelling type and annual season on the waste composition. The content of plastic and crude fibres in the waste differed the most among the samples, probably due to use of different bag types (plastic and paper) in the different collection systems. Variations in the ash content and the calorific value might be explained by differences in the sorting instructions (whether soil and cat litter are allowed in the organic fraction). Significant seasonal variations were seen for ash, S and Cl. Dwelling type showed no statistically significant influence on any waste components. A test for uniform distribution of the p-values from the analysis of variance (Kolmogorov-Smirnov test) showed that the overall composition of the collected waste was strongly affected by the collection system (city) and season, while dwelling type had no significant influence.     

Methane yield in source-sorted organic fraction of municipal solid waste

Treating the source-separated organic fraction of municipal solid waste (SS-OFMSW) by anaerobic digestion is considered by many municipalities in Europe as an environmentally friendly means of treating organic waste and simultaneously producing methane gas. Methane yield can be used as a parameter for evaluation of the many different systems that exist for sorting and pre-treating waste. Methane yield from the thermophilic pilot scale digestion of 17 types of domestically SS-OFMSW originating from seven full-scale sorting systems was found. The samples were collected during 1 year using worked-out procedures tested statistically to ensure representative samples. Each waste type was identified by its origin and by pre-sorting, collection and pre-treatment methods. In addition to the pilot scale digestion, all samples were examined by chemical analyses and methane potential measurements. A VS-degradation rate of around 80% and a methane yield of 300-400Nm(3) CH(4)/ton VS(in) were achieved with a retention time of 15 days, corresponding to approximately 70% of the methane potential. The different waste samples gave minor variation in chemical composition and thus also in methane yield and methane potential. This indicates that sorting and collection systems in the present study do not significantly affect the amount of methane produced per VS treated.     

Nitrogen Inputs from Agriculture: Towards Better Assessments of Eutrophication Status in Marine Waters

Nutrient enrichment of coastal marine waters caused by losses of nitrate (NO₃⁻) from agriculture is an increasing global problem. In the European Union, the Nitrates Directive (ND) of 1991 was meant to be a cornerstone in reducing eutrophication effects in coastal waters downstream from intensively farmed catchments. Although reductions in losses of nitrate have been attained, very few Member States have yet been able to reduce eutrophication effects caused by inputs of NO₃⁻ from agriculture. We report trends in concentrations of NO₃⁻ and chlorophyll-a (Chl-a) in Danish coastal and open marine waters during the period from 1996 to 2011 together with an assessment of eutrophication status based on multiple indicators (e.g. nutrient concentrations, Chl-a, submerged aquatic vegetation and benthic macroinvertebrates). Despite decreasing concentrations of both NO₃⁻and Chl-a, Danish coastal waters are not yet to be classified as ‘unaffected by eutrophication’. In order to improve future pan-European evaluations of the effectiveness of the ND, we argue for the added value of including indicators and assessment principles from other European Directives, i.e. the Water Framework Directive and the Marine Strategy Framework Directive.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-014-0514-y) contains supplementary material, which is available to authorized users.     

Linking local impacts to changes in climate: a guide to attribution

Assessing past impacts of observed climate change on natural, human and managed systems requires detailed knowledge about the effects of both climatic and other drivers of change, and their respective interaction. Resulting requirements with regard to system understanding and long-term observational data can be prohibitive for quantitative detection and attribution methods, especially in the case of human systems and in regions with poor monitoring records. To enable a structured examination of past impacts in such cases, we follow the logic of quantitative attribution assessments, however, allowing for qualitative methods and different types of evidence. We demonstrate how multiple lines of evidence can be integrated in support of attribution exercises for human and managed systems. Results show that careful analysis can allow for attribution statements without explicit end-to-end modeling of the whole climate-impact system. However, care must be taken not to overstate or generalize the results and to avoid bias when the analysis is motivated by and limited to observations considered consistent with climate change impacts.