Nitrogen concentrations in mosses indicate the spatial distribution of atmospheric nitrogen deposition in Europe

In 2005/6, nearly 3000 moss samples from (semi-)natural location across 16 European countries were collected for nitrogen analysis. The lowest total nitrogen concentrations in mosses (<0.8%) were observed in northern Finland and northern UK. The highest concentrations (≥1.6%) were found in parts of Belgium, France, Germany, Slovakia, Slovenia and Bulgaria. The asymptotic relationship between the nitrogen concentrations in mosses and EMEP modelled nitrogen deposition (averaged per 50 km × 50 km grid) across Europe showed less scatter when there were at least five moss sampling sites per grid. Factors potentially contributing to the scatter are discussed. In Switzerland, a strong (r² = 0.91) linear relationship was found between the total nitrogen concentration in mosses and measured site-specific bulk nitrogen deposition rates. The total nitrogen concentrations in mosses complement deposition measurements, helping to identify areas in Europe at risk from high nitrogen deposition at a high spatial resolution.     

Environmental and health effects of nanomaterials in nanotextiles and façade coatings

Engineered nanomaterials (ENM) are expected to hold considerable potential for products that offer improved or novel functionalities. For example, nanotechnologies could open the way for the use of textile products outside their traditional fields of applications, for example, in the construction, medical, automobile, environmental and safety technology sectors. Consequently, nanotextiles could become ubiquitous in industrial and consumer products in future. Another ubiquitous field of application for ENM is fa?ade coatings. The environment and human health could be affected by unintended release of ENM from these products. The product life cycle and the product design determine the various environmental and health exposure situations. For example, ENM unintentionally released from geotextiles will probably end up in soils, whereas ENM unintentionally released from T-shirts may come into direct contact with humans and end up in wastewater. In this paper we have assessed the state of the art of ENM effects on the environment and human health on the basis of selected environmental and nanotoxicological studies and on our own environmental exposure modeling studies. Here, we focused on ENM that are already applied or may be applied in future to textile products and fa?ade coatings. These ENM's are mainly nanosilver (nano-Ag), nano titanium dioxide (nano-TiO(2)), nano silica (nano-SiO(2)), nano zinc oxide (nano-ZnO), nano alumina (nano-Al(2)O(3)), layered silica (e.g. montmorillonite, Al(2)[(OH)(2)/Si(4)O(10)]nH(2)O), carbon black, and carbon nanotubes (CNT). Knowing full well that innovators have to take decisions today, we have presented some criteria that should be useful in systematically analyzing and interpreting the state of the art on the effects of ENM. For the environment we established the following criteria: (1) the indication for hazardous effects, (2) dissolution in water increases/decreases toxic effects, (3) tendency for agglomeration or sedimentation, (4) fate during waste water treatment, and (5) stability during incineration. For human health the following criteria were defined: (1) acute toxicity, (2) chronic toxicity, (3) impairment of DNA, (4) crossing and damaging of tissue barriers, (5) brain damage and translocation and effects of ENM in the (6) skin, (7) gastrointestinal or (8) respiratory tract. Interestingly, some ENM might affect the environment less severely than they might affect human health, whereas the case for others is vice versa. This is especially true for CNT. The assessment of the environmental risks is highly dependent on the respective product life cycles and on the amounts of ENM produced globally.     

X-ray absorption and photoelectron spectroscopy investigation of selenite reduction by FeII-bearing minerals

The long-lived radionuclide 79Se is one of the elements of concern for the safe storage of high-level nuclear waste, since clay minerals in engineered barriers and natural aquifer sediments strongly adsorb cationic species, but to lesser extent anions like selenate (SeVIO4(2-)) and selenite (SeIVO3(2-)). Previous investigations have demonstrated, however, that SeIV and SeVI are reduced by surface-associated FeII, thereby forming insoluble Se0 and Fe selenides. Here we show that the mixed FeII/III (hydr)oxides green rust and magnetite, and the FeII sulfide mackinawite reduce selenite rapidly (< 1 day) to FeSe, while the slightly slower reduction by the FeII carbonate siderite produces elemental Se. In the case of mackinawite, both S(-II) and FeII surface atoms are oxidized at a ratio of one to four by producing a defective mackinawite surface. Comparison of these spectroscopic results with thermodynamic equilibrium modeling provides evidence that the nature of reduction end product in these FeII systems is controlled by the concentration of HSe(-); Se0 forms only at lower HSe(-) concentrations related to slower HSeO3(-) reduction kinetics. Even under thermodynamically unstable conditions, the initially formed Se solid phases may remain stable for longer periods since their low solubility prevents the dissolution required for a phase transformation into more stable solids. The reduction by Fe2+-montmorillonite is generally much slower and restricted to a pH range, where selenite is adsorbed (pH < 7), stressing the importance of a heterogeneous, surface-enhanced electron transfer reaction. Although the solids precipitated by the redox reaction are nanocrystalline, their solubility remains below 6.3 x 10(-8) M. No evidence for aqueous metal selenide colloids nor for Se sorption to colloidal phases was found. Since FeII phases like the ones investigated here should be ubiquitous in the near field of nuclear waste disposals as well as in the surrounding aquifers, mobility of the fission product 79Se may be much lower than previously assumed.     

Contaminant transport in a municipal drinking water supply: a steady-state approach to estimate rate and uncertainty

Contaminant transport is generally considered to be a key factor when assessing and classifying the environmental risk of polluted areas. In the study presented here, a steady-state approach was applied to obtain estimates of the transit time and concentration of the pesticide metabolite BAM (2,6-dichlorobenzoamide) at a site where it is contaminating a municipal drinking water supply. A Monte Carlo simulation technique was used to quantify the uncertainty of the results and to evaluate the sensitivity of the used parameters. The adopted approach yielded an estimated median transit time of 10 y for the BAM transport from the polluted site to the water supply. Soil organic carbon content in the unsaturated zone and the hydraulic conductivity in the saturated zone explained 44% and 23% of the uncertainty in the transit time estimate, respectively. The sensitivity analysis showed that the dilution factor due to regional groundwater flow and the soil organic carbon content at the polluted site explained 53% and 31% of the uncertainty of concentration estimates, respectively. In conclusion, the adopted steady-state approach can be used to obtain reliable first estimates of transit time and concentration, but to improve concentration predictions of degrading contaminants, a dynamic model is probably required.     

Membrane introduction/laser photoionization time-of-flight mass spectrometry

Two-photon resonance enhanced multiphoton ionization (REMPI) has been shown to be a unique ionization method for mass spectrometry, exhibiting both high sensitivity and chemical selectivity. Because REMPI is a gas-phase method, its applications have been limited either to direct analysis of vapor phase samples, or in conjunction with an initial laser desorption or other vaporization step. We describe here for the first time a combination of membrane introduction mass spectrometry (MIMS) and REMPI with time-of-flight mass spectrometry (TOF-MS), which allows for the direct analysis of trace amounts of organic compounds in water samples. The objective of our research was the detection of very low levels of aromatic contaminants, particularly benzene, toluene, and xylene (BTX), in aqueous solutions without interference due to the water. We have measured limits of detection (LOD) for selected aromatics in water below 1 part-per-trillion with an averaging time of less than 10 s using a continuous sample flow.     

Cytotoxicity of TBBPA and effects on proliferation, cell cycle and MAPK pathways in mammalian cells

Poly-brominated flame retardants are ecotoxicologically relevant chemicals that can show high persistency in environmental samples and bioaccumulation in marine and fresh water animals. One of the most widely used compound is tetrabromobisphenol A (TBBPA). Until today, the toxicological data are rather fragmentary. Our studies on acute and sub-acute toxic effects with established cell lines demonstrate that TBBPA interferes with cellular signaling pathways. Cell viability is significantly reduced in a time- and concentration-dependent manner. The observed EC50 for rat kidney cells (NRK) was 52 microM (27 mg/l), 168 microM (90 mg/l) for A549 human lung cells, and 200 microM (108 mg/l) for Cal-62 human thyroid cells, respectively. The comparison of TBBPA with the non-brominated substance bisphenol A (BPA) clearly demonstrates that only the brominated compound exerts these effects on proliferation and cell viability. Cell cycle regulation was influenced considerably in Cal-62 cells, showing an explicit G2/M arrest in the cell cycle at TBBPA concentrations higher than 75 microM. Cellular signaling pathways directly connected to these affected parameters, e.g. the mitogen activated protein kinase (MAPK) cascades, are partly influenced in a cell specific and dose dependent manner. The extracellular-signal regulated kinase (ERK) is deactivated in NRK and A549 cells and activated in Cal-62 cells with increasing TBBPA concentrations.     

Lignite coke moving bed adsorber for cement plants – BAT or beyond BAT?

The IPPC Directive requires permits which must contain emission limit values and other conditions based on BAT. The BAT are characterised and the terms ‘conditional BAT’ and ‘beyond BAT’ are defined and explained. The borderline between BAT and beyond BAT is explained by means of an outstanding example which is the lignite coke moving bed adsorber for the abatement of the waste gas from a cement plant where waste for co-incineration is fed to a considerable extent is described in detail. Worldwide, this technique has been successfully applied at one cement plant for sixteen years.     

Polychlorinated biphenyls in polysulfide sealants--occurrence and emission from a landfill station

Approximately 80,000 kg polysulfide sealant containing 10,000-18,000 kg polychlorinated biphenyls (PCB) was deposited at a Swedish municipal landfill station during 1965-1973. Investigations during 1994 showed that soil layers underneath the landfill had concentration of PCB not alarmingly high. The concentration of PCB congeners in ground water samples was elevated 4-750 times compared to a reference sample. Based on samples of ground water, leachate water, and flux chambers measuring evaporation of PCB from the landfill surface, the emission of PCB was estimated to be 1 g sigmaPCB/yr. This very low rate was attributed to the high sorptive capacity of the sealant. Compared to a reference site, the evaporation flux was elevated for the most volatile congeners, but factors 20-1400 lower than from another landfill which was contaminated with PCB in paper-pulp fibres.