Modified Fenton's processes for effective in‐situ chemical oxidation—Laboratory and field evaluation

Fenton's reagent in its conventional form, although effective for contaminant treatment, is impractical from an in‐situ field application perspective due to low pH requirements (i.e., pH 3‐4), and limited reagent mobility when introduced into the subsurface. Modified Fenton's processes that use chelated‐iron catalysts and stabilized hydrogen peroxide have been developed with the goal of promoting effective in‐situ field application under native pH conditions (i.e., pH 5‐7), while extending the longevity of hydrogen peroxide. Laboratory experiments conducted in soil columns packed with organic soil to compare modified Fenton's catalysts with conventional catalysts (acidified iron [II]) indicated superior mobility and sorption characteristics for modified Fenton's catalysts. Furthermore, the acidic pH of a conventional catalyst was buffered to the native soil range, leading to increased iron precipitation/adsorption following permeation through the soil column. The chelates present within the modified Fenton's catalyst showed greater affinity toward iron compared with the native soil and, hence, minimized iron loss through adsorption during the permeation process even at pH 5‐7. Field effectiveness of the modified Fenton's process was demonstrated at a former dry‐cleaning facility located in northeast Florida. Preliminary laboratory‐scale experiments were conducted on soil‐slurry and groundwater samples to test the process efficacy for remediation of chlorinated solvents. Based on successful experimental results that indicated a 94 percent (soil slurry) to 99 percent (groundwater) reduction of cis‐1,2‐DCE, PCE, and TCE, a field‐scale treatment program was initiated utilizing a plurality of dual‐zone direct push injection points installed in a grid fashion throughout the site. Results of treatment indicated a 72 percent reduction in total chlorinated contamination detected in the site groundwater following the first injection event; the reduction increased to 90 percent following the second injection event. © 2002 Wiley Periodicals Inc.     

Trace Gas Emissions from Biomass Burning from Northeast Region in India—Estimates from Satellite Remote Sensing Data and GIS

Biomass burning associated with shifting cultivation areas from the northeastern region of India is an important source of trace gas emissions in the Southeast Asian region. In the present study, satellite data pertaining to IRS-P4 OCM data and DMSP-OLS has been used to quantify the intensity, areal extent and amount of biomass burnt in the northeastern region states at district level. Trace gas emissions have been quantified both by using IPCC based emission ratios and ground based emission ratios obtained from field based studies. Areal estimates with respect to shifting cultivation areas from IRS-P4 OCM satellite data of 4th April 2000 suggested nearly 112.99 km² of the northeastern region of India affected due to shifting cultivation. In the study, DMSP OLS nighttime data has been used to capture the real time fires during the dry season. The results suggested high amount of fires during the March season when compared to April and May. Using the emission ratios obtained from the ground-based studies and IPCC emission ratios, the emissions for the individual non-CO₂ trace gases have been computed in a GIS framework using the biomass data, combustion factors and emission ratios. Results suggested emissions of 2.063 Mt CH₄, 17.94 Mt CO, 1.419 Mt N₂O, and 51.28 Mt NO _x and 2.643 Mt release of CH₄, 3.7204 Mt CO, 0.145 Mt N₂O, and 8.477 Mt NO _x , respectively, from biomass burning due to shifting cultivation for the year 2000, from the northeastern region in India. The study highlights the importance of Satellite Remote sensing data and GIS in quantifying the trace gas emissions from biomass burning.     

Bacopa phospholipid complex retrieves aluminum maltolate complex–induced oxidative stress and apoptotic alterations in the brain regions of albino rat

Environmental Science and Pollution Research - Highly bioavailable plant phospholipid complex that can reverse aluminum maltolate (AlM)–induced toxicity is not yet reported. Hence, the...     

Airborne Dust Particle Counting Techniques

The paper briefly describes an electro-optical system for counting of dust particles, which is based on the scattering phenomena.Utilizing the scattering of light by various size particles present in the environment, various particle counting techniques have been developed in order to measure the scattered intensity of light. Light scatters in all directions but much more in the so-called near forward direction 17^∘ off axis, at 163^∘ from the light source in the visible range.On the basis of two techniques, the right angle and forward angle scattering, opto-mechanical systems have been developed which measure scattered intensity and particulate matter. The forward scattering Nephelometer is more sensitive and therefore is more suitable for pollution monitoring than the right angle scattering Nephelometer. Whereas the right angle scattering Nephelometer has the utility in extremely low concentration in ppb level owing to the excellent light trap efficiency in comparison to forward scattering Nephelometer. In this paper measurement techniques and measurement results associated with design and development of a real time particle analyser are also discussed.     

Persistence of radon-222 flux during monsoon at a geothermal zone in Nepal

The Syabru-Bensi hydrothermal zone, Langtang region (Nepal), is characterized by high radon-222 and CO₂ discharge. Seasonal variations of gas fluxes were studied on a reference transect in a newly discovered gas discharge zone. Radon-222 and CO₂ fluxes were measured with the accumulation chamber technique, coupled with the scintillation flask method for radon. In the reference transect, fluxes reach exceptional mean values, as high as 8700 ± 1500 g m⁻² d⁻¹ for CO₂ and 3400 ± 100 × 10⁻³ Bq m⁻² s⁻¹ for radon. Gases fluxes were measured in September 2007 during the monsoon and during the dry winter season, in December 2007 to January 2008 and in December 2008 to January 2009. Contrary to expectations, radon and its carrier gas fluxes were similar during both seasons. The integrated flux along this transect was approximately the same for radon, with a small increase of 11 ± 4% during the wet season, whereas it was reduced by 38 ± 5% during the monsoon for CO₂. In order to account for the persistence of the high gas emissions during monsoon, watering experiments have been performed at selected radon measurement points. After watering, radon flux decreased within 5 min by a factor of 2–7 depending on the point. Subsequently, it returned to its original value, firstly, by an initial partial recovery within 3–4 h, followed by a slow relaxation, lasting around 10 h and possibly superimposed by diurnal variations. Monsoon, in this part of the Himalayas, proceeds generally by brutal rainfall events separated by two- or three-day lapses. Thus, the recovery ability shown in the watering experiments accounts for the observed long-term persistence of gas discharge. This persistence is an important asset for long-term monitoring, for example to study possible temporal variations associated with stress accumulation and release.     

Spatio-temporal analysis of fire events in India: implications for environmental conservation

Information on fires in different geographic regions of India is relatively scarce. This study quantifies spatial and temporal patterns in fire occurrences covering different states and districts in India. Two important scientific questions are answered in this study: (1) how are the fire events distributed across different geographical regions? (2) are there any specific districts where fire events clustered across space and time? To address these questions, Along Track Scanning Radiometer (ATSR) derived satellite fire counts from 1997–2006 were used and the datasets were analysed using spatial scan statistic. Spatial scan statistic provides a test statistic for most likely ‘hotspot’ spatial clusters, based on the likelihood ratio test and Monte Carlo simulation. Results from geographical analysis based on state boundaries suggested Maharastra state had the highest number of fires followed by Madhya Pradesh, Chattisgarh, Orissa, etc., during the 10-year period. Among the several districts, the spatial scan statistic identified the most likely cluster of fire events in Dausa, Karauli, Sawai Madhopur, Bharatpur and Alwar in addition to several other secondary clusters, with high statistical significance. These results are based on a large sample of cases, and they provide convincing evidence of spatial clustering of fire events in the Indian region. Results relating to hotspot areas of fire risk can guide policy makers towards the best management strategies for avoiding damages to forests, human life and personal property in the ‘hotspot’ districts.     

Developing a predictive understanding of landscape importance to the Punan-Pelancau of East Kalimantan, Borneo

In order for local community views to be incorporated into new development initiatives, their perceptions need to be clearly understood and documented in a format that is readily accessible to planners and developers. The current study sought to develop a predictive understanding of how the Punan Pelancau community, living in a forested landscape in East Kalimantan, assigns importance to its surrounding landscapes and to present these perceptions in the form of maps. The approach entailed the iterative use of a combination of participatory community evaluation methods and more formal modeling and geographic information system techniques. Results suggest that landscape importance is largely dictated by potential benefits, such as inputs to production, health, and houses. Neither land types nor distance were good predictors of landscape importance. The grid-cell method, developed as part of the study, appears to offer a simple technique to capture and present the knowledge of local communities, even where their relationship to the land is highly complex, as was the case for this particular community.     

Equity and productivity assessments in the Olifants River basin, South Africa

Emerging approaches to water resources development and management typically highlight equity and productivity as two main objectives. In the context of integrated water resources management within a river basin, managers and stakeholders often need a comparative assessment of different options for water augmentation and/or allocation. Pitting such options against predefined objectives, such as equity and productivity, requires an assessment of the effects that available options will have on these objectives. Available documentation indicates that not only does the interpretation of such objectives vary widely, but also the available methods for assessing equity and productivity run into significant limitations in the availability of adequate data. This limitation has largely kept decision makers from gaining a comprehensive overview of equity and productivity scenarios, whether within or across sectors, that could facilitate better‐informed decisions. To address this methodological gap, this article scrutinizes different notions associated with equity and water productivity, and limitations in prevalent assessment methods with the view to develop and demonstrate pragmatic methodologies for assessing equity and productivity in data‐scarce contexts. The discussion and findings are based on a review of relevant literature and empirical and consultative research work in the Olifants River basin in South Africa. The demonstrated methodologies for assessing equity and productivity, besides being useful in data‐scarce contexts, are insightful for initiating several policy measures and also for exploring the relationship between equity and water productivity.     

Health problems among workers of iron welding machines: an effect of electromagnetic fields

The possible effects of EMFs on 100 workers were studied by means of structured interview and rating of subjective symptoms. As control 41 sewing machine operators and assembly workers were chosen, interviewed and likewise tested. The present Indian ceiling value of 250 Tesla for the equivalent power density was exceeded in more than 50% of the machines. The highest leakage fields, for EMFs, were found near machines, which gave a high exposure to the hands. Eye irritation complaints were reported by 40% of the workers. The fertility outcome did not show any significant result.