Prospects of inspection and maintenance of two-wheelers in India.

Two-wheeler vehicles in Delhi, India--roughly 70% of the total vehicle fleet--are responsible for a significant portion of the city's vehicle emissions and petroleum consumption. An inspection and maintenance (I/M) program that ensures vehicle emission control systems are well maintained can complement other emission reduction strategies. This paper presents the initial findings of extensive data collected on vehicle characteristics and emissions for two-wheeler vehicles operating in Delhi in a series of I/M camps conducted by the Society of Indian Automobile Manufacturers and various partners in late 1999. The analysis shows idle HC and CO emissions [measured in terms of parts per million (ppm) and volume % (vol %), respectively] in a slow declining trend with subsequent model years, reflecting tighter emission standards and more advanced emission technologies. The I/M benefits--3 vol % and 39% reduction in idle and mass CO, respectively; 40 vol % and 22% reduction in idle and mass HC, respectively; and a 10-20% increase in fuel efficiency--were higher than those reported in the literature. Although these benefits are substantial, any implementation strategy needs to consider cost-effectiveness. In the present study, only 10% of vehicles--contributing 22% of the total vehicle emissions--failed the idle CO standard. Fleet emissions data variability necessitates a large sample size to develop a baseline for the vehicle fleet, but a smaller, scientifically designed sample and better data collection quality could periodically track the benefits at future camps.     

Effects of Habitat Size and Patch Isolation on Reproductive Success of the Serpentine Morning Glory

Abstract: We examined the effects of habitat area and patch isolation on reproductive success in serpentine morning glory ( Calystegia collina [Convolvulaceae]), a primarily self-incompatible clonal plant endemic to serpentine outcrops in northern California's coast ranges. Within a 4000-km ² region, we compared the reproductive success of C. collina on 16 small (<5 ha) and 7 large ( >300 ha) outcrops. Flower and fruit production were significantly higher on large serpentine outcrops than on small outcrops. Fruit production also was positively correlated with the soil's ratio of calcium to magnesium. Successful pollination was positively affected by flower density and the number of other flowering patches within 100 m of a C. collina patch. The number of nearby flowering patches was considerably higher on large than on small outcrops. Flowers on large outcrops did not receive significantly more bee visitors than flowers on small outcrops, suggesting that pollination success is related to the quality rather than the quantity of pollen deposited. Fruit production by plants on both small and large outcrops was enhanced by the experimental addition of pollen from other patches, but not by the addition of pollen from the same patch. These findings demonstrate that the size of habitat may have strong effects on the reproductive success of locally endemic plants by enhancing opportunities for successful sexual reproduction. They also warn against the presumption that naturally patchy plant species are invulnerable to the effects of habitat fragmentation.     

Two daily smoke maxima in eighteenth century London air

Varied electrostatics experiments followed Benjamin Franklin's pioneering atmospheric investigations. In Knightsbridge, Central London, John Read (1726–1814) installed a sensing rod in the upper part of his house and, using a pith ball electrometer and Franklin chimes, monitored atmospheric electricity from 1789 to 1791. Atmospheric electricity is sensitive to weather and smoke pollution. In calm weather conditions, Read observed two daily electrification maxima in moderate weather, around 9 am and 7 pm. This is likely to represent a double diurnal cycle in urban smoke. Before the motor car and steam railways, one source of the double maximum smoke pattern was the daily routine of fire lighting for domestic heating.     

Movement of a tritium plume in shallow groundwater at a legacy low-level radioactive waste disposal site in eastern Australia

Between 1960 and 1968 low-level radioactive waste was buried in a series of shallow trenches near the Lucas Heights facility, south of Sydney, Australia. Groundwater monitoring carried out since the mid 1970s indicates that with the exception of tritium, no radioactivity above typical background levels has been detected outside the immediate vicinity of the trenches. The maximum tritium level detected in groundwater was 390 kBq/L and the median value was 5400 Bq/L, decay corrected to the time of disposal. Since 1968, a plume of tritiated water has migrated from the disposal trenches and extends at least 100 m from the source area. Tritium in rainfall is negligible, however leachate from an adjacent landfill represents a significant additional tritium source. Study data indicate variation in concentration levels and plume distribution in response to wet and dry climatic periods and have been used to determine pathways for tritium migration through the subsurface.     

Lead and Cadmium in Precipitation: Their Contribution to Pollution

Atmospheric precipitation samples have been collected at six sites in the London (U.K.) area and at one rural site. Levels of lead and cadmium have been determined and are readily related to local sources of air pollution. A quantitative assessment is made of the metallic pollution resulting from removal of metals from the atmosphere In precipitation and it is compared to the contribution of other pollution pathways.     

Carcinogenic potential, levels and sources of polycyclic aromatic hydrocarbon mixtures in indoor and outdoor environments and their implications for air quality standards

Both the World Health Organization and the UK Expert Panel on Air Quality Standards (EPAQS) have considered benzo(a)pyrene (BaP) as a marker of the carcinogenic potency of the polycyclic aromatic hydrocarbons (PAH) mixture, when recommending their respective guidelines for PAHs in outdoor air. The aim of this research is to compare the concentrations and relative abundance of individual PAH and their contribution to the overall carcinogenic potential of the PAH mixture in indoor and outdoor environments to assess the suitability of the UK air quality standard derived for outdoor air for use as a guideline for indoor environments. Samples were collected onto filters using active sampling in different indoor and outdoor microenvironments. The ratio of individual compounds to BaP, the BaP equivalent concentrations and the percentage contribution of each individual compound to the total carcinogenic potential of the PAH mixture were calculated. Mean concentrations were generally lower indoors (BaP=0.10 ng/m(3)) than outdoors (BaP=0.19 ng/m(3)), with the exception of indoor environments with wood burners (BaP=2.4 ng/m(3)) or ETS (BaP=0.6 ng/m(3)). The ratio of individual PAHs to BaP showed no significant differences between indoors (e.g. DahA/BaP=0.27) and outdoors (DahA/BaP=0.31). The relative contribution of BaP to the PAH overall carcinogenic potency is similar indoors (49%), outdoors (54%) and in the smelter environment (48%) used by EPAQS to derive the UK Air Quality Standard for ambient air. These results suggest the suitability of BaP as a marker for the carcinogenic potential of the PAH mixture irrespective of the environment. Despite small differences in PAH mixture composition indoors and outdoors, the level of protection afforded by the present EPAQS standard is likely to be similar whether it is applied to indoor or outdoor air.     

Analysis of the air pollution climate at a central urban background site

Measurements of air pollutants from a background site in central London are analysed. These comprise hourly data for CO, NO, NO₂, O₃, SO₂ and PM₁₀ from 1996 to 2008 and particle number count from 2001 to 2008. The data are analysed in terms of long-term trends, annual, weekly and diurnal cycles, and autocorrelation and cross-correlation functions. CO, NO and NO₂ show a typical traffic-associated pattern with two daily peaks and lesser concentrations at the weekend. Particle number count and PM₁₀ show a similar cycle, but with smaller amplitude. Ozone has an annual cycle with a maximum in May, influenced by the spring maximum in background ozone, but the diurnal and weekly cycles are dominated by losses through reaction with nitric oxide. Particle number count shows a minimum corresponding with maximum air temperatures in August, whereas the CO, NO NO₂ and SO₂ show a minimum in June/July. There is a lower particle count to NO_x ratio at the background site compared to a central London kerbside site (Marylebone Road) and a seasonal pattern in particle count to NO_x and PM₁₀ ratios consistent with loss of nanoparticles by evaporation during atmospheric transport. Sulphur dioxide peaks in the morning in summer, but at midday in winter consistent with emissions from elevated sources mixing down from aloft as the diurnal mixed layer deepens. Implications for epidemiological studies of air quality and health are discussed. Sulphur dioxide, carbon monoxide, nitric oxide and nitrogen dioxide show clear downward trends over the measurement period, PM₁₀ declines initially before levels stabilised, and ozone concentrations increased.