Flue gas treatability studies: a tool for techno-economic control of industrial air pollution

Air pollution problems in developing countries have gained larger fraction in the last decade especially due to non functioning and non implementation of effective air pollutioncontrol devices in industries. In industrial wastewater management, adequate treatability studies are conducted to arrive at a techno-economic treatment option. However no suchstudies were done for reducing air pollution or emission fromindustries until now in India. Little information was availableabout such studies in other countries. This article provides information about a novel technique known asflue gas treatability studies and to undertake such studies, a pilot scale system is installed in Air Pollution Control Divisionof M/s National Environmental Engineering research Institute, NEERI, Nagpur-20, India. This study is a tool for techno-economicselection of air pollution control systems specially for small/medium scale industrial emissions.     

A new process of combined pretreatment and dyeing: REST

Use of enzymes in textile processes has many advantages as far as the environmentally friendly processes are concerned. These advantages include water and energy savings, less chemical use, less fabric damage, mild and environmentally friendly process conditions. In this work, C.I. Reactive Yellow 15, C.I. Reactive Red 21 and C.I. Reactive Blue 19 were used to dye untreated woven cotton fabric in a laboratory scale dyeing machine, on a pilot scale jig and on a pilot scale winch by using a single bath combined process, in which various enzymes, namely, amylase, pectinase, and catalase were employed. This new process was named as the “Rapid Enzymatic Single-bath Treatment” (REST), since it was completed almost in half of the conventional dyeing time, and all of the stages, namely, desizing, scouring, bleaching and dyeing were carried out in a single bath without replacing the process water with fresh water until the end of the dyeing. In the REST process, the untreated, starch-sized fabric was first desized by amylase enzyme, and this was followed by a pectinase treatment in the same bath. The fabric was then bleached by H₂O₂ in the same bath, and after the hydrogen peroxide bleaching; the catalase enzyme was added to the bath to remove H₂O₂ residues before reactive dyeing. Without carrying out intermediate washings/rinsings between these processes, the reactive dyeing was carried out in a conventional way in the same bath, and finally, the fabric was taken from the bath and washed out. The colour yield was compared with the dyeings which were carried out conventionally in separate baths. Finally, the REST has many benefits in terms of water saving, reduced process time and energy consumptions compared to the conventional preparatory and dyeing process of cotton fabrics.     

Determination of Cadmium Levels in Agricultural Areas of Çarşamba and Bafra Plains

Cadmium pollution resulted from fertilizer applications were studied by determining cadmium levels in agricultural and non-agricultural soils of Bafra and Çar?amba plains. Soil samples of 68 were collected from agricultural (34) and non-agricultural (34) areas. The sample of 2 g was placed in a test tube and digested with hydrochloric acid and nitric acid mixture (3:1, v/v) in an aluminum block. Taking up the evaporated residue was dissolved in 1% nitric acid and total cadmium concentrations were determined with GF-AAS. Mean level of cadmium contents were found in agricultural areas 0.162?±?0.078 for Çar?amba and 0.433?±?0.288 mg kg^?1 for Bafra. The accuracy of the method was tested with determining cadmium contents of standard reference material and cadmium spiked soil samples.     

Concentrations of cadmium and lead heavy metals in Dardanelles seawater

Cadmium and lead were determined simultaneously in seawater by differential pulse stripping voltammetry (DPSV) preceded by adsoptive collection of complexes with 8-hydroxyquinoline (oxine) on to a hanging mercury drop electrode (HMDE). In preliminary experiments the optimal analytical condition for oxine concentration was found to be 2.10⁻⁵ M, at pH 7.7, the accumulation potential was −1.1 V, and the initial scannig potential was −0.8 V. The peak potentials were found −0.652 V for Cd and −0.463 V for Pb At the 60 s accumalation time. The limit of detection (LOD) and limit of quantitatification (LOQ) were found to be by voltammetry as 0.588 and 1.959 μg l⁻¹ (RSD, 5.50%) for Cd and 0.931 and 3.104 μg l⁻¹ (RSD, 4.10%) for Pb at 60 s stirred accumulation time respectively. In these conditions the most of the seawater samples are amenable for direct voltammetric determination of cadmium and lead using a HMDE. An adsorptive stripping mechanism of the electrode reaction was proposed. For the comparison, seawater samples were also analysed by ICP-atomic emission spectrometry method (ICP-AES). The applied voltammetric technique was validated and good recoveries were obtained.     

A numerical study on the effects of EGR and spark timing to combustion characteristics and NOx emission of a GDI engine

EGR is one of the most significant strategies for reducing especially nitrogen oxides (NO_x) emissions from internal combustion engines. The thermal efficiency of spark ignition engines is lower than compression ignition engines because of its lower compression ratio. If the compression ratio is increased to obtain higher thermal efficiency, there may be a knocking tendency in spark ignition engines. EGR can be used in order to reduce NO_x emissions and avoid knocking phenomena at higher compression ratios. In-cylinder temperature at the end of combustion is decreased and heat capacity of fresh charge is increased when EGR applied. Besides EGR, spark timing is another significant parameter for reducing exhaust emissions such as nitrogen oxides, and unburned hydrocarbon (UHC). In this study the effects of EGR and spark timing on spark ignition engine were investigated numerically. KIVA codes were used in order to model combustion process. The combustion process has been modeled for a single cylinder, four stroke and gasoline direct injection (GDI) spark ignition engine. The results showed that in-cylinder pressure and heat release rate decrease as EGR ratio increase. In-cylinder pressure increases with the advancing of spark timing. Advancing spark timing increases the heat release rate and in-cylinder temperature. The simulation results also showed that EGR reduced exhaust gas temperature and NO_x emissions.     

Peat fire effects on some properties of an artificially drained peatland

The management of artificially drained organic soils is a very important issue, since the accelerated mineralization and sometimes peat fires alter physical and chemical properties of soils and the availability of plant nutrients. This study was performed to determine relatively short- and long-term effects of peat fires on some physical and chemical properties of soils in the artificially drained Gavur Lake Peatland of Turkey. To achieve this objective, measured properties of soils burned in 2001, burned in 1965, and unburned were compared. The results indicated that soil bulk density, pH, amounts of soluble salts, CaCO3, and concentrations of ammonium acetate-extractable (AAE) Ca, Mg, K, and Na were significantly higher for both sampling depths in the burned areas. The areas burned in 2001 had higher pH, soluble salts, and the concentrations of AAE Ca, Mg, and K compared with sites burned in 1965, and this was reasoned with leaching losses and plant uptake of these basic cations for four decades in the latter. Percent saturation and organic carbon contents of soils, however, were significantly lower in the burned areas for both sampling depths. Olsen P levels were not significantly different between the sites. This work clearly shows that alterations in soils properties with peat fires do not recover in the long term.     

Mapping of Noise by Using Gis in ŞAnliurfa

Traffic noise results from highways where the most important source of noise in cities. This noise has the properties of linear source. Constitution of noise maps has become compulsory to see the regions that are influenced from the noise, and to put forward the future environmental approaches. During the mapping of the noise, generally two fundamental problems are encountered, excessive time requirement for the measurement of noise and determining the method for the constitution of maps.This study was conducted in Sanliurfa city of Turkey, in 3×4 km area. Continuous weekly data were obtained in 11 measurement points. By using these data in (GIS) environment, preparation of the most reliable map in the shortest time is achieved by the interpolation method.     

An Analogy on Assessment of Urban Air Pollution in Turkey Over the Turn of the Millennium (1992–2001)

Rapid industrialization and urbanization in Turkey, especially over the last twenty five years, has provided better living standards to its residents, but it also caused a decrease in environmental quality. In late 1970's, air quality monitoring activities were started in some major cities by individual researchers in Turkey. It was just around the 1990's that a countrywide program on continuous air pollution monitoring in major province centers and selected large towns was launched. The impact of air pollution on people depend on various factors, such as existence and magnitude of coal powered energy generation plants, type of urban heating and their efficiency, and the numbers and specifications of vehicles. In this study, current Turkish urban air quality over the turn of the Millennium (1992–2001) is studied in the light of the country's worst cities in terms of outdoor air quality, the number of upper respiratory diseases, sinusitis, bronchitis, and pneumonia cases in these provinces reported by the state medical treatment facilities in 2001. The population that is under outdoor urban air pollution hazard was computed. A comparative analysis between the provinces that use natural gas and others that use fossil fuels was also completed in order to project monetary gains if the studied provinces will transform their indoor heating and industrial operations to be run by natural gas or other cleaner energy sources. If natural gas use in air polluted urban centers could be realized in the near future, approximately 212 to 350 million US dollars per annum could to be saved just by reducing health related problems caused by outdoor air pollution.     

Modeling of agricultural drought risk pattern using Markov chain and GIS in the western part of Bangladesh

The aim of the study is to assess the agricultural drought risk condition in the context of global climate change in the western part of Bangladesh that covers about 45% area of the country for the period of 1960–2011. Drought Index (DI) and Drought Hazard Index (DHI) have been calculated by Markov Chain analysis and that of Drought Vulnerability Index (DVI) from socioeconomic and physical indicators. The DI values show that the northern part in general is more drought-prone, having less crops prospect, whereas the southern part is less drought-prone with high crop potentiality. The probability of extreme drought occurrence increases in recent decades in some parts as a result the drought events become more frequent in the areas. The DHI ranges from 15 to 32, and northern part suffers from more extreme drought hazards than that of southern part. DVI also indicates that northern part is exposed to high to very high drought vulnerability as higher percentage of illiterate people are involved in agricultural practices and high percentage of irrigation to cultivable land, but southern part exposed to moderate to low vulnerability because of low values of vulnerability indicators. Finally, agricultural drought exists at high risk condition in northern part and low in southern parts and 21.63, 26.54 and 29.68% of the area poses very high, high and moderate risk, respectively. So, immediate adaptation measures are needed keeping in mind climate features like rainfall and temperature variability, drought risk and risk ranking to make viable adaptation measures.     

Online sorting of recovered wood waste by automated XRF-technology: part II. Sorting efficiencies

Sorting of waste wood is an important process practiced at recycling facilities in order to detect and divert contaminants from recycled wood products. Contaminants of concern include arsenic, chromium and copper found in chemically preserved wood. The objective of this research was to evaluate the sorting efficiencies of both treated and untreated parts of the wood waste stream, and metal (As, Cr and Cu) mass recoveries by the use of automated X-ray fluorescence (XRF) systems. A full-scale system was used for experimentation. This unit consisted of an XRF-detection chamber mounted on the top of a conveyor and a pneumatic slide-way diverter which sorted wood into presumed treated and presumed untreated piles. A randomized block design was used to evaluate the operational conveyance parameters of the system, including wood feed rate and conveyor belt speed. Results indicated that online sorting efficiencies of waste wood by XRF technology were high based on number and weight of pieces (70-87% and 75-92% for treated wood and 66-97% and 68-96% for untreated wood, respectively). These sorting efficiencies achieved mass recovery for metals of 81-99% for As, 75-95% for Cu and 82-99% of Cr. The incorrect sorting of wood was attributed almost equally to deficiencies in the detection and conveyance/diversion systems. Even with its deficiencies, the system was capable of producing a recyclable portion that met residential soil quality levels established for Florida, for an infeed that contained 5% of treated wood.