Evaluation of ecological risk,source, and spatial distribution of some heavy metals in marine sediments in the Middle and Eastern Black Sea region,Turkey

Environmental Science and Pollution Research - In the present study, the concentration levels of heavy metals such as Mn, Fe, Ni, Cu, Zn, Cr, and Pb in sediment samples collected from 16 sampling...     

Microfibrillated Cellulose-Silver Nanocomposite Based PVA Hydrogels and Their Enhanced Physical,Mechanical and Antibacterial Properties

Journal of Polymers and the Environment - Modification of cellulose with silver nanoparticles produces various nanocomposites with significantly developed properties. This work aims to prepare a...     

Heavy metals in three commercially valuable cyprinids in the river Panjkora,district Lower Dir,Khyber Pakhtunkhwa,Pakistan

This study was conducted in river Panjkora (Khall, upstream; Timergara, downstream) and its tributary (Konhaye stream, reference site) at district Lower Dir. The study was aimed to assess heavy metal load in gills, liver, kidneys, and muscles of three fish species, namely Schizothorax esocinus, Racoma labiata, and Crossocheilus diplocheilus. The heavy metals, including nickel, cadmium, lead, copper, zinc, chromium, iron, and manganese were determined using an atomic absorption spect-rophotometer. Nickel and cadmium were not detected in any of the collected specimens at all sampling sites. Concentration of the detected metals varied significantly depending upon fish species and tissue type. Crossocheilus diplocheilus showed higher accumulated concentration of heavy metals while R. labiata contained the least. Schizothorax esocinus and R. labiata displayed significant differences in their concentrations of metals. The order of accumulation of heavy metals in different tissues was liver>kidneys>muscles>gills. Data demonstrated that heavy metal levels in the studied species were within permissible limits and thus, apparently suitable for human consumption. Currently, the river contains a sewage burden, and continued heavy pollution may ultimately lead to serious problems in the future.     

Comparison of phytotoxic effects of bio-synthesised copper oxide nanoparticle and ionic copper on Elodea canadensis

This study aims to investigate the phytotoxic effects of both Punica granatum peel extract directed copper oxide nanoparticles (CuONPs) and copper nitrate on Elodea canadensis. The CuONPs were characterised by UV–visible spectroscopy (UV-Vis), Dynamic Light Scattering (DLS), X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), and Fourier Transform Infrared (FT-IR) Spectroscopy. The ratio of photosynthetic pigments, total soluble protein, malondialdehyde (MDA), catalase (CAT), ascorbate peroxidase (APX), and copper accumulation in the E. canadensis was determined to evaluate the phytotoxicity of the CuONPs and copper nitrate on E. canadensis. The significant improvements were observed in the growth rate of E. canadensis, chlorophyll a and b, carotenoid contents, and total soluble protein in the E. canadensis when it was exposed to the CuONPs. Additionally, CAT and APX activities and MDA contents were enhanced by accumulation of the CuONPs into the E. canadensis. These results suggested that oxidative stress was alleviated, owing to the result of an increase in the antioxidants such as CAT and APX, with an increase in the concentration of the CuONPs. Finally, the findings of this study show that copper nitrate has many negative effects on E. canadensis compared bio-synthesised CuONPs.     

Stability of some quality traits in bread wheat (Triticum aestivum) genotypes

This study was carried out in order to determine some quality traits such as thousand grain weight (TGW), hectoliter weight (HW), grain protein content (GPC), Zeleny sedimentation volume (ZSV) and stability of quality traits of 25 bread wheat genotypes. The experiment was conducted at seven environmental conditions during 2 growing periods (2003-2004 and 2004-2005) using randomized complete block design with four replicates. The ANOVA showed that out of the total sum of squares, 48.4, 28.0 and 23.6% for TGW, 71.4, 14.9 and 13.7% for HW, 54.4, 23.0 and 22.6% for GPC, 44.7, 41.7 and 13.6% for ZSV was attributable to E, G and G x E interaction effects, respectively. Thousand grain weight, hectoliter weight, grain protein content and Zeleny sedimentasyon volume of genotypes changed from 34.5 to 41.4 g, from 76.5 to 80.4 Kg, from 11.49 to 13.37% and from 22.1 to 46.0 ml, respectively. Seven stability parameters, covering a wide range of statistical approaches, were used so as to predict the genotypes. The study of genotypic stability showed that Bezostaya and advanced lines numbered 11 and 24 had high stability for quality traits and proved to be the best within the pool of the studied genotypes. Also, 8 and 17 numbered genotypes demonstrated high stability for TGW, HW, GPC and HW, GPC and ZSV, respectively.     

Effects of spacing and post-planting treatments on survival and growth of Fraxinus angustifolia seedlings

This study was conducted at a bottomland hardwood site with heavy textured soil in Akyazi, Turkey to determine the effect of initial spacing (3.0 x 3.0, 3.0 x 2.0, 2.5 x 1.6 and 2.5 x 1.2 m) and post-planting treatments (untreated check, moving, hoeing, disking, and hoeing plus disking) on early survival and growth of Fraxinus angustifolia Vahl. One-year old bare-root seedlings (70 +/- 5 cm in height) were hand-planted in December 2004. Through three years survival was perfect with a rate of 98% in all treatments. Spacing and the interaction between spacing and post-planting treatment did not significantly affect seedling growth through three years. However height and diameter growth increased overtime and differed significantly among post-planting treatments. The hoeing and hoeing plus disking treatments gave the highest growth, and resulted in about 31% increase in diameter and height increment, and in total diameter and height about 20%. These results suggest that post-planting treatments on bottomland sites with heavy textured soil give promising results.     

The effects of alginate microspheres on phytoremediation and growth of Lemna minor in the presence of Cd

Today, the removal of increased amount of contaminant concentrations in nature such as metals, nanoparticles, has become an essential issue to struggle with. In this paper, both the toxic effects of non-essential Cd on Lemna minor in presence of alginate microspheres and metal removal capacity of Cd-exposed L. minor and microspheres were investigated. Three test groups were constructed: group (L) containing Lemna, group (M) containing alginate microsphere and group (L?+?M) containing alginate microsphere and Lemna. Five different levels of Cd concentrations were added into these groups. Estimation models were constructed to estimate Cd removal capacities of L. minor and microspheres, and time-concentration-dependent growth (GRC) rates of both microsphere-containing and non-containing groups were modelled by regression analysis. It was seen that microspheres alone only had no positive or negative effects on Lemna growth. It was observed that, for all test groups the time-dependent growth rate has both increase–decrease trends in general. The toxicity effect of Cd on Lemna growth was reduced by adding microspheres into medium. Furthermore, the results stated that test groups containing only microspheres (M, 0–97.56%) and consortium groups (M?+?L, 0–98.26%) were slightly more successful in Cd removal process compared to Lemna (L) groups (L, 0–97.32%).     

Adsorption characteristics of Cu and Ni on Irish peat moss

Peat has been widely used as a low cost adsorbent to remove a variety of materials including organic compounds and heavy metals from water. Various functional groups in lignin allow such compounds to bind on active sites of peat. The adsorption of Cu(2+) and Ni(2+) from aqueous solutions on Irish peat moss was studied both as a pure ion and from their binary mixtures under both equilibrium and dynamic conditions in the concentration range of 5-100mg/L. The pH of the solutions containing either Cu(2+) or Ni(2+) was varied over a range of 2-8. The adsorption of Cu(2+) and Ni(+2) on peat was found to be pH dependent. The adsorption data could be fitted to a two-site Langmuir adsorption isotherm and the maximum adsorption capacity of peat was determined to be 17.6 mg/g for Cu(2+) and 14.5mg/g for Ni(2+) at 298 K when the initial concentration for both Cu(2+) and Ni(2+) was 100mg/L, and the pH of the solution was 4.0 and 4.5, respectively. Column studies were conducted to generate breakthrough data for both pure component and binary mixtures of copper and nickel. Desorption experiments showed that 2mM EDTA solution could be used to remove all of the adsorbed copper and nickel from the bed.     

Heavy metal content and distribution in surface sediments of the Seyhan River, Turkey

Chemical fractionation of seven heavy metals (Cd, Cr, Cu, Mn, Ni, Pb and Zn) was studied using a modified three-step sequential procedure to assess their impacts in the sediments of the Seyhan River, Turkey. Samples were collected from six representative stations in two campaigns in October 2009 and June 2010, which correspond to the wet and dry seasons, respectively. The total metal concentrations in the sediments demonstrated different distribution patterns at the various stations. Cadmium was the only metal that was below detection at all stations during both sampling periods. Metal fractionation showed that, except for Mn and Pb, the majority of metals were found in the residual fraction regardless of sampling time, indicating that these metals were strongly bound to the sediments. The potential mobility of the metals (non-residual fractions) is reflected in the following ranking: Pb > Mn > Zn > Cu > Ni > Cr in October 2009 and Mn > Pb > Zn > Cu > Ni > Cr in June 2010. The second highest proportion of metals was bound to organic matter/sulfides, originating primarily from anthropogenic activities. Non-residual metal fractions for all stations were highest in June 2010, which may be linked to higher organic matter concentrations in the sediment samples with 1.40% and 15.1% in October 2009 and June 2010, respectively. Potential sediment toxicity was evaluated using the Risk Assessment Code (RAC). Based on RAC classification, Cd and Cr pose no risk, Cu and Ni pose low risk, Pb and Zn were classified as medium risk metals, while the environmental risk from Mn was high. In addition, based on the sediment quality guidelines (SQG), the Seyhan River can be classified as a river with no, to moderate, toxicological risks, based on total metal concentrations.     

Heavy metals in water, sediment and tissues of Leuciscus cephalus from a stream in southwestern Turkey

Concentrations of heavy metals (Cd, Cr, Cu, Pb and Zn) were measured in water, bottom sediment and tissues (muscle and gills) of Leuciscus cephalus from the Dipsiz stream in the Yatagan basin (southwestern Turkey), the site of a thermal power plant. Results for levels in water were compared with national and international water quality guidelines, as well as literature values were reported for streams and rivers. Comparisons were made of metal concentrations in water and sediment with those in the muscle and gills of L. cephalus caught from the Dipsiz stream. We found that there was metal accumulation in the gills compared to the muscle. Concentrations of Cd, Pb, Zn and Cr in the gills were higher than that in the muscle; however, Cu levels were higher in muscle than that in gills. Concentrations of heavy metals in L. cephalus muscle were below the legal limits for human consumption, although Cr, Pb and Zn levels in the gills were above the limits in the fish taken from the Dipsiz stream. On the other hand, no correlation was found between metal concentrations in water and sediment or between metal concentrations in water and muscle and gills of L. cephalus. A positive correlation was found between concentrations of Cu and Zn in the sediment and in fish tissue, whereas there was no relationship between other metal concentrations in the sediment and water, and muscle and gills of L. cephalus. As with water, Pb and Cd concentrations in particular were higher in sediment than that in background levels. The results show that the pollutants from the thermal power plant may be a source of these elements.