Trace elements in the shoreline and seabed sediments of the southern Caspian Sea: investigation of contamination level,distribution, ecological and human health risks,and elemental partition coefficient

Environmental Science and Pollution Research - This study assesses the occurrence of trace elements (TEs) in sediments of the southern Caspian Sea. A total of 16 shoreline sediment samples and 15...     

Human and ecological risk assessment of heavy metals in different particle sizes of road dust in Muscat,Oman

Environmental Science and Pollution Research - Heavy metal contamination of Hg, As, Cu, Cr, Zn, and Pb was investigated in three different fractions 45, 125, and 200 μm of road dust...     

Effects of using arsenic–iron sludge wastes in brick making

The arsenic–iron sludge generated in most of the treatment systems around the world is discharged into the nearest watercourse, which leads to accumulative rise of arsenic and iron concentrations in water. In this study, attempts were made to use the arsenic–iron sludge in making bricks and to analyze the corresponding effects on brick properties. The water treatment plant sludge is extremely close to brick clay in chemical composition. So, the sludge could be a potential substitute for brick clay. This study involved the addition of sludge with ratios 3%, 6%, 9% and 12% of the total weight of sludge–clay mixture. The physical and chemical properties of the produced bricks were then determined and evaluated and compared to control brick made entirely from clay. Results of different tests indicated that the sludge proportion and firing temperature were the two key factors in determining the quality of bricks. The compressive strength of 3%, 6%, 9% and 12% sludge containing brick samples were found to be 14.1 MPa, 15.1 MPa, 9.4 MPa and 7.1 MPa, respectively. These results indicate that the compressive strength of prepared bricks initially increased and then decreased with the increase of sludge proportion. Leaching characteristics of burnt bricks were determined with the variation of pH at a constant temperature. The optimum amount of sludge that could be mixed with clay to produce good bonding of clay–sludge bricks was found to be 6% (safely maximum) by weight.     

Maternal and fetal blood lead concentrations under non-occupational lead exposure and associated factors in Pakistan

This study in selected Pakistani populations was conducted to determine the blood lead levels (BLL) in mothers and their developing fetuses. Associated factors were correlated with the maternal BLL. Blood samples from 113 pregnant women and their umbilical cords were examined for BLL and cord blood lead levels through a graphite furnace-attached atomic absorption spectrophotometer. A structured questionnaire was also used to obtain sociodemographic and obstetric data based on basic demographic data, reproductive history, hemoglobin levels, gestational age, parity, mode of delivery, maternal and baby weight, drinking water, menarche age, blood pressure, lead (Pb)-containing eye liner use, smoking, and nutritional status. In order to assess the strength of the relationship between different parameters, Pearson's coefficient correlation was utilized and their significance was determined by applying the t-test. Data demonstrated that the maternal BLL were always higher than the recommended concentrations of 10 µg/dl and many factors contributed towards such results. Drinking water seemed to affect the Pb concentration as women using spring water had relatively higher BLL. The calcium concentration in pregnant women and their fetuses ranged from 9 to 13 mg/dl. Majority of the pregnant women were undergraduates with 12 years of education (equivalent to high school in the United States). Evidence indicates that the avoidance of Pb intake and its associated factors in the study area will diminish risk to newborns.     

National and sub-national drinking water fluoride concentrations and prevalence of fluorosis and of decayed,missed, and filled teeth in Iran from 1990 to 2015: a systematic review

Fluoride intake, fluorosis, and dental caries could affect quality of life and disease burden worldwide. As a part of the National and Sub-national Burden of Disease Study (NASBOD) in Iran, we conducted a systematic review to evaluate province-year-specific mean drinking water fluoride concentrations and prevalence of fluorosis and of decayed, missed, and filled teeth (DMFT) in Iran from 1990 to December 2015. We did electronic searches of all English and Persian publications on PubMed, ScienceDirect, Google Scholar, and Iranian databases. Results revealed that the weighted mean drinking water fluoride concentration in Iran from 1990 to 2015 has been about 0.65?±?0.38 mg/l. However, based on the WHO guideline value (1.50 mg/l) and the maximum permissible Iranian national fluoride standard (1.40 to 2.40 mg/l depending on the region's climate), there have been some regions in Iran with non-optimum fluoride concentrations in their drinking water (up to 7.0 mg/l). Overall, concentrations have been higher in southern parts of Iran and in some areas of Azerbaijan-e-Gharbi Province in the northwest and lower in the rest of the northwest and central parts of Iran. In addition, some hotspots have been found in Bushehr Province, southwest of Iran. The highest prevalence of dental flourosis has been reported in normal index while the lowest prevalence has been expressed in severe index. The lowest DMFT (about 0.1) was in Arsanjan City in Fars Province, and the highest (about 6.7) was for Najaf Abad City in Isfahan Province. Prevalence of fluorosis has been rather high in studied areas of Iran (e.g. 100 % in Maku City in Azarbaijan-e-Gharbi Province), and there was discrepancy for DMFT, but a lack of studies renders the results inconclusive. Further studies, health education and promotion plans, and evidence-based nutrition programs are recommended.     

Comparison of steel,aluminum and composite bonnet in terms of pedestrian head impact

Material selection for automotive closures is influenced by different factors such as cost, weight and structural performance. Among closures, the automotive bonnet must fulfill the requirements of pedestrian safety which is evaluated by child and adult headform impactors. The mechanisms of injury are complex, therefore; the Head Injury Criterion (HIC) which shows a measure of the likelihood of head injury arising from an impact is developed. HIC includes the effects of head acceleration and the duration of the acceleration.In this paper a new finite element model has been developed which is capable to simulate head impact phenomenon between headform impactors and composite bonnet. Then the behavior of three identical bonnets made of steel, aluminum and composite have been investigated by the developed model. It is shown that the energy absorption of aluminum bonnet is smaller than steel and composite ones and for keeping the aluminum bonnet at the same level of stiffness, it is necessary to increase the thickness. Therefore, the aluminum bonnet needs a larger space between the bonnet and the parts in the engine compartment. It is shown that although the displacement of headform for composite bonnet is more than that of steel and aluminum ones, but the amount of HIC’s, which are measured at the collision points are much less than those measured at the same collision points for steel and aluminum bonnets.In addition the comparison of three bonnets of the different materials has been done to highlight cost, weight, and structural performance issues.     

Effect of Curing Temperature on Mechanical Properties of Bio-phenolic/Epoxy Polymer Blends

Journal of Polymers and the Environment - Nowadays, researchers continue studies for alternative materials to replace the redundant petroleum-based products. The combination of various polymer...