Encapsulation of nonmetallic fractions recovered from printed circuit boards waste with thermoplastic

The present work includes a process for encapsulation by combining substantially simultaneously dry nonmetallic printed circuit boards (PCBs) powder and recycled high-density polyethylene (rHDPE) in an extruder to form a homogenous matrix. The extruded materials were then molded into standard tensile, flexural, and impact properties testing specimens. Nonmetallic PCB mainly consists of large amount of glass fiber–reinforced epoxy resin materials. Incorporation of 50 wt% nonmetallic PCB in rHDPE matrix had increased the flexural strength and modulus by 35% and 130%, respectively. Tensile strength reported to be constant without much improvement. However, the Young’s modulus has increased by 180%, with incorporation of 50 wt% nonmetallic PCB. The addition of 6 phr (parts per hundred) maleated polyethylene (MAPE) resulted in 2-fold increase in tensile and flexural strength. Regarding the leaching properties, Cu was identified as the metal that leached at the highest level from the raw nonmetallic PCB, at 59.09 mg/L. However, after the nonmetallic PCB was filled in rHDPE/PCB composites, the concentration of Cu was reduced far below the regulatory limit, to only 3 mg/L. Thermal properties of composites were studied, and it was found out that incorporation of nonmetallic PCB fillers in rHDPE resulted in low thermal conductivity, whereas mechanical strength of the composites showed maximum improvements at 220 °C. Overall, the encapsulation technique using nonmetallic PCB waste has formed a monolithic waste form that provides a barrier to the dispersion of wastes into the environment.

ImplicationsNonmetallic materials reclaimed from waste PCBs were used to analyze the chemical composition, and it was found that nonmetalllic PCBs mainly consist of glass fiber–reinforced epoxy resin materials. With such millions of glass fibers in nonmetallic PCBs, there are mass-excellent supporting bodies that enhance the mechanical properties of composites. In fact, utilization of nonmetallic PCB waste as filler in composites can dramatically restrain the solubility of heavy metals in leachate solution, thus making it safe to be used in practical products.     

Examination of land use/land cover changes,urban growth dynamics,and environmental sustainability in Chittagong city,Bangladesh

As in many other developing countries, cities in Bangladesh have witnessed rapid urbanization, resulting in increasing amounts of land being taken over and therefore land cover changing at a faster rate. Until now, however, few efforts have been made to document the impact of land use and land cover changes on the climate, environment, and ecosystem of the country because of a lack of geospatial data and time-series information. By using open source Landsat data integrated with GIS technologies and other ancillary data, this study attempts to classify land use and create land cover maps, enabling post-classification change detection analysis. By this method, we document the spatial and temporal trajectory of urban expansion in Chittagong, the second largest city in Bangladesh, over a 36-year period. The findings suggest that, over the study period, 56 % of the land cover has undergone change, mainly because of the expansion of built-up areas and other human activities. During the 36-year period, the built-up area around Chittagong city has expanded by 618 %, with an average annual rate of increase of 17.5 %. As a result of rapid urbanization, the vegetated hills near urban development areas face serious threats of further encroachment and degradation, given that 2178 ha of hills have already been intruded over the study period. Because urbanization processes in Bangladesh have traditionally been viewed as the result of population growth and economic development, very little work has been done to track the potential growth trajectory in a physical or spatial context. This study, therefore, will contribute to the current understanding of urban development in Bangladesh from a temporal and spatial point of view. Findings will be able to assist planners, stakeholders, and policy makers in appreciating the dynamism of urban growth and therefore will facilitate better planning for the future to minimize environmental impacts.     

Assessment of health risk from organochlorine pesticides residues in high-fat spreadable foods produced in Poland

Currently, butter and margarine are food products attracting wide customer interest. Every day, consumers around the world buy these products for human consumption. Butter is obtained from milk fat, while margarine is derived from vegetable oils. The content of organochlorine pesticide (OCP) residues was examined in both types of these high fatty products. A gas chromatograph with MSD (HP 5973) detector was used for the determination of pesticides such as α-HCH, β-HCH, γ-HCH, DDT, DDD, DDE, aldrin, dieldrin, endrin, heptachlor and heptachlor epoxide. The examined products had diverse concentrations of the analyzed compounds. Visible was the division based on the origin of the product, which might be composed of animal or vegetable fats. The research has revealed the presence of OCP residues in all examined spreads. Quantities of organochlorine compounds did not pose an immediate danger to the consumers’ health. Human and environmental health risk assessment was carried out by the estimation of lifetime average daily dose (LADD) and non-carcinogenic health hazard quotient (HQ). Total estimated LADD ranged between 1.3 × 10^?5 and 3.1 × 10^?5 mg kg^?1 d^?1 for butter, and 1.9 × 10^?6 and 4.6 × 10^?6 mg kg^?1 d^?1 for margarine and mix spread. The HQ ranged between 1.1 × 10^?4 and 3.7 × 10^?4 for butter, and 1.4 × 10^?5 and 9.0 × 10^?6 for margarine and mix spread for adults. These estimated HQs were within the safe acceptable limits, indicating a negligible risk to the residents of the study area.     

Biostimulation of the autochthonous microbial community for the depletion of polychlorinated biphenyls (PCBs) in contaminated sediments

In this study, the effect of the biostimulation of the autochthonous microbial community on the depletion of polychlorinated biphenyls (PCBs) in historically contaminated sediments (6.260?±?9.3 10^?3?μg PCB/ g dry weight) has been observed. Biostimulation consisted of (1) the amendment of an electron donor to favor the dehalogenation of the high-chlorinated PCBs and (2) the vegetation of sediments with Sparganium sp. plants to promote the oxidation of the low-chlorinated PCBs by rhizodegradation. The effects of the treatments have been analyzed in terms of both PCB depletion and changes of the autochthonous bacterial community structure. The relative abundance of selected bacterial groups with reference to untreated sediments has been evaluated by quantitative real-time PCR. The amendment of acetate determined the enrichment of anaerobic dechlorinators like Dehalococcoides sp. Vegetation with Sparganium sp. plants determined the enrichment of either (3) the dechlorinators, Dehalococcoides and the Chloroflexi o-17/DF-1 strains or (4) the Acidobacteria, β-Proteobacteria, Actinobacteria, α-Proteobacteria, Bacteroidetes, and Firmicutes. The combination of the two biostimulation strategy determined the 91.5 % of abatement of the initial PCB content.     

Economic analysis of biogas and compost projects in a palm oil mill with clean development mechanism in Malaysia

This article is a case study to compare the economic viabilities of biogas generation and compost projects in a palm oil mill in Malaysia with and without clean development mechanism (CDM). Biogas is captured from anaerobic ponds or digester tanks treating palm oil mill effluent (POME) and converted to green renewable electricity for grid connection, while compost is produced from the shredded empty fruit bunch and raw untreated POME. The both technologies were compared by considering the changes of the materials flow and energy balances. A palm oil mill with a capacity of 54?t fresh fruit bunch per hour has the potential to produce either 6.9?GWh of electricity from biogas or fertilizer equivalent to 488?t of nitrogen, 76?t of phosphorus and 1,065?t of potassium per year. The economic analysis for 10?years project term analysis indicated that CDM gave a significant impact and ensured economic viability for both projects with 25?% of internal rate of return (IRR), RM 12.39 million of net present value (NPV) and 3.5?years of payback period (PBP) for biogas project, whereas 31?% of IRR, RM 10.87 million of NPV and 2.9?years of PBP for compost project, respectively. In addition, sensitivity analysis indicated that the profitability of both projects will vary depending on the economic situation, such as electricity price which is based on the government policy, whereas compost price that depend on fertilizer market price with 43?% NPV change in 20?% range of fertilizer value.     

Trace Metals in Upland Headwater Lakes in Ireland

Trace elements (n = 23) in Irish headwater lakes (n = 126) were investigated to determine their ambient concentrations, fractionation (total, dissolved, and non-labile), and geochemical controls. Lakes were generally located in remote upland, acid-sensitive regions along the coastal margins of the country. Total trace metal concentrations were low, within the range of natural pristine surface waters; however, some lakes (~20 %) had inorganic labile aluminum and manganese at levels potentially harmful to aquatic organisms. Redundancy analysis indicated that geochemical weathering was the dominant controlling factor for total metals, compared with acidity for dissolved metals. In addition, many metals were positively correlated with dissolved organic carbon indicating their affinity (or complexation) with humic substances (e.g., aluminum, iron, mercury, lead). However, a number of trace metals (e.g., aluminum, mercury, zinc) were correlated with anthropogenic acidic deposition (i.e., non-marine sulfate), suggesting atmospheric sources or elevated leaching owing to acidic deposition. As transboundary air pollution continues to decline, significant changes in the cycling of trace metals is anticipated.     

Trends and problems of solid waste management in developing countries: a case study in seven Palestinian districts

There is a great interest in solving problems related to municipal solid waste (MSW) management in the Palestinian territory. However, few studies have been done to assess the extent of these problems and suggest the best alternative solutions. This study aims at assessing MSW conditions in the seven major districts in northern West Bank, Palestinian territory. The study focuses on comparing several MSW management elements (such as collection, budget, and disposal) in municipalities, village councils, and refugee camps in the studied districts and the problems faced by these institutions in handling the waste. It also provides information on MSW collection service availability and waste disposal practices in the districts studied. It was found that, although MSW collection service was available for 98% of the residents in the areas surveyed, no proper treatment or landfill procedure was followed for the collected waste in most of these areas. Instead, waste burning in open dumpsites was the most common practice. Moreover, due to inefficient collection of waste disposal fees from the residents, municipalities were forced to sometimes cut the collection service and reduce its labor force, especially in villages. The budget for MSW management was between 2% and 8% of the total budget of the municipalities studied, indicating a low priority for this issue.     

Clean energy,clean water,and quality education: Prospects of achieving Sustainable Development Goals (SDGs) in Sri Lanka

The Sustainable Development Goal (SDG) 7 targets universal access to affordable, reliable, and modern energy services by 2030. Modern or clean energy is perceived to be the golden thread that connects economic growth, human development, and environmental sustainability. However, one third of the world's population still uses solid fuels for cooking, endangering human health, and the environment. This paper, therefore, analyses demographic, socio-economic, and housing characteristics that affect the fuel choice for cooking. Further, it identifies how SDG 4 (quality education) and SDG 6 (clean water) create synergies with SDG 7 (clean energy). The data are obtained from the four waves of the Sri Lankan Households Income and Expenditure Survey, covering more than 79,000 households. The random-effects panel multinomial logit results reveal that household income, wealth, marital status and education of the head, age and education of the spouse, household size, number of children, housing characteristics, and residential sector are vital in selecting clean fuel for cooking. Furthermore, advanced sustainability analysis shows SDG 4 and 6 have a strong synergistic effect on SDG 7. Policymakers can use the findings to prioritise educational, water, and sanitation programmes in national policies aimed at enhancing the use of clean cooking fuel and technologies to meet SDG 7 by 2030.