Experimental investigation of tribological characteristics and emissions with nonedible sunflower oil as a biolubricant

Plant (vegetable) oil has been evaluated as a substitute for mineral oil–based lubricants because of its natural and environmentally friendly characteristics. Availability of vegetable oil makes it a renewable source of bio-oils. Additionally, vegetable oil–based lubricants have shown potential for reducing hydrocarbon and carbon dioxide (CO₂) emissions when utilized in internal combustion (IC) engines and industrial operations. In this study, sunflower oil was investigated to study its lubricant characteristics under different loads using the four-ball tribometer and the exhaust emissions were tested using a four-stroke, single-cylinder diesel engine. All experimental works conformed to American Society for Testing and Materials standard (ASTM D4172-B). Under low loads, sunflower oil showed adequate tribological characteristics (antifriction and antiwear) compared with petroleum oil samples. The results also demonstrated that the sunflower oil–based lubricant was more effective in reducing the emission levels of carbon monoxide (CO), CO₂, and hydrocarbons under different test conditions. Therefore, sunflower oil has the potential to be used as lubricant of mating components.

Implications: An experimental investigation of the characteristics of nonedible sunflower oil tribological behaviors and potential as a renewable source for biofluids alternative to the petroleum oils was carried out. The level of emissions of a four–stroke, single-cylinder diesel engine using sunflower oil as a biolubricant was evaluated.     

Measuring Asset Values and Flow Benefits of Non-Traded Products and Ecosystems Services of Forest and Woodland Resources in South Africa

Conventional measures of economic output, national income and wealth highly underestimate the value and contribution of natural resources to economic welfare. This paper makes estimates of the asset values and flow benefits of non-traded goods and services from forests and woodland resources in South Africa. Four benefit categories were included, namely direct consumptive use values (timber and non-timber products), non-consumptive use values (recreation for example), indirect use values (environmental services such as carbon sequestration, watershed protection, etc.), and non-use values (based on contingent valuation by tourists). Asset values were calculated knowing the change in physical stocks and the relevant prices. In South Africa, the increase in assets was equivalent to 1.1% of gross domestic product (GDP) (forests were improving, but fynbos deteriorating), and the flow benefits were equivalent to 0.8% of GDP. These are large magnitudes.     

Succinate-bonded pullulan: An efficient and reusable super-sorbent for cadmium-uptake from spiked high-hardness groundwater

Chemically modified pullulan was evaluated for its sorption efficiency and selectivity to remove cadmium(Cd) from spiked high-hardness groundwater(GW). Pullulan esterified with succinic anhydride using dimethylaminopyridine showed a fairly high degree of substitution value as confirmed by1 H NMR spectroscopy. Pullulan succinate(Pull-Suc) was converted into the sodium salt(Pull-Suc-Na). The effect of contact time(5–200 min) and p H(2–8) on Cd-uptake by the sorbent(Pull-Suc-Na) was investigated. The sorbent showed more than 90% Cd-removal in first 15 min from distilled water(DW) and GW solution,respectively. Comparison of Pull-Suc-Na with other polysaccharidal sorbents suggested its high efficiency(DW 476.2 mg/g and GW 454.5 mg/g) and selectivity for the removal of Cd by an ion exchange mechanism, which is further supported by the negative Gibbs free energy values calculated from Langmuir isotherms. A Langmuir isotherm kinetic model provided the best fit for the sorption of Cd using Pull-Suc-Na. The sorbent showed a negligible decrease in Cd-uptake over three regeneration cycles. The thermal stability testing of the sorbents indicated that Pull-Suc-Na(sorbent) is more stable than Pull-Suc.     

An Experimental Study of Heat Pipe Performance Using Nanofluids

Heat pipe cooling is widely used in computer processors. Advances in microprocessor technology have resulted in reduced heat transfer surface area. Maintaining an efficient cooling process is therefore challenging. The main goal of this experimental study is to perform a parametric study on heat pipe performance using nanofluids. Nanofluids of 1 and 3 vol% of alumina nanoparticles of 20–50 nm diameters in deionized water versus deionized water as a base fluid were considered in the present study. The nanofluids are prepared in our laboratory using two-step method. The nanofluids thermal properties are measured to confirm the properties enhancement that could indicate a corresponding performance enhancement of the heat pipe. A 10 mm inner diameter, 200 mm long brass tube with 50 mm long evaporator, and 50 mm long water cooled condenser were used. Heat pipe wall temperature is reduced with nanofluids as is the temperature difference between the evaporator and condenser. The thermal diffusivity of the nanofluids is increased by 10%. The pipe pressure in case of deionized water was higher than the corresponding one for the nanofluids by 20–32%.     

31P-NMR evaluation of organophosphorus pesticides degradation through metal ion promoted hydrolysis

The degradation of some organophosphorus pesticides (OPPs) in the presence of metal ions was studied by ³¹P-NMR spectroscopy. Both ³¹P-NMR and gas chromatography/mass spectroscopy results were used in order to determine the nature of metabolites formed after degradation. The degraded organophosphorus pesticide were investigated for chlorpyrifos and phoxim in the presence of several metal ions including Hg²⁺, Cu²⁺, Cd²⁺, Ni²⁺, Pb²⁺, and Ag⁺. ³¹P-NMR results indicated Ag⁺ and Hg²⁺ ion promoted degradation of OPPs and other metal ions formed complex with OPPs and cannot degrade OPPs. We found that the degradation of chlorpyrifos and phoxim with Ag⁺ or Hg²⁺ led to the formation of O,O-diethyl-O-methyl phosphorothionate, (C₂H₅O)₂(CH₃O)PS, at metal ion/pesticide mole ratios ≤1.0 and completely decomposed at a higher mole ratio of 10. Finally, the method was successfully applied to the degradation study of a number of technical and formulated pesticides in the presence of Ag⁺ ion at a metal ion/pesticide mole ratio of 10.     

Determining the most suitable areas for artificial groundwater recharge via an integrated PROMETHEE II-AHP method in GIS environment (case study: Garabaygan Basin, Iran)

Flood spreading is a suitable strategy for controlling and benefiting from floods. Selecting suitable areas for flood spreading and directing the floodwater into permeable formations are amongst the most effective strategies in flood spreading projects. Having combined geographic information systems (GIS) and multi-criteria decision analysis approaches, the present study sought to locate the most suitable areas for flood spreading operation in the Garabaygan Basin of Iran. To this end, the data layers relating to the eight effective factors were prepared in GIS environment. This stage was followed by elimination of the exclusionary areas for flood spreading while determining the potentially suitable ones. Having closely examined the potentially suitable areas using the Preference Ranking Organization Method for Enrichment Evaluations (PROMETHEE) II and analytic hierarchy process (AHP) methods, the land suitability map for flood spreading was produced. The PROMETHEE II and AHP were used for ranking all the alternatives and weighting the criteria involved, respectively. The results of the study showed that most suitable areas for the artificial groundwater recharge are located in Quaternary Q_g and Q^gsc geologic units and in geomorphological units of pediment and Alluvial fans with slopes not exceeding 3 %. Furthermore, significant correspondence between the produced map and the control areas, where the flood spreading projects were successfully performed, provided further evidence for the acceptable efficiency of the integrated PROMETHEE II-AHP method in locating suitable flood spreading areas.     

Rapid liquid chromatographic analysis of flurazepam in pharmaceutical preparation

An accurate and reproducible method for the analysis of flurazepam hydrochloride in pharmaceutical preparations has been described. A simple and rapid isocratic HPLC elution method was employed which requires about 15 minutes to be performed. The percentage mean recovery of flurazepam hydrochloride in Dalmane capsules was found to be 100.67% + 1.23% of the declared amount     

Interaction between co‐solvents and algae in the residue dynamics of fenitrothion

Abstract

Fresh and estuarine water algae maintained in laboratory microcosms simulating river‐lake/estuary‐bay systems were exposed to ¹⁴C‐fenitrothion formulated with Atlox and tank mixed with Aerotex or Dowanol (11.5:1.5:1.5 w/v/v). Generally, the tank mix co‐solvents determined the amount of uptake and the array of derivatives formed by the algae. Typically, exposed to an Aerotex mix the ratio of ethyl acetate extractable (NP) fraction : ethyl acetate unextractable (P) fraction was as 3.5:1.0, exposed to a Dowanol mix the ratio was as 1.5:1.0. Within any comparable time period, fresh water algae turned over more of the C‐ring of fenitrothion than the estuarine genera. Turn‐over was enhanced when Aerotex was the tank mix co‐solvent.     

Empirical gas emission and oxidation measurement at cover soil of dumping site: example from Malaysia

Methane (CH₄) is one of the most relevant greenhouse gases and it has a global warming potential 25 times greater than that of carbon dioxide (CO₂), risking human health and the environment. Microbial CH₄ oxidation in landfill cover soils may constitute a means of controlling CH₄ emissions. The study was intended to quantify CH₄ and CO₂ emissions rates at the Sungai Sedu open dumping landfill during the dry season, characterize their spatial and temporal variations, and measure the CH₄ oxidation associated with the landfill cover soil using a homemade static flux chamber. Concentrations of the gases were analyzed by a Micro-GC CP-4900. Two methods, kriging values and inverse distance weighting (IDW), were found almost identical. The findings of the proposed method show that the ratio of CH₄ to CO₂ emissions was 25.4 %, indicating higher CO₂ emissions than CH₄ emissions. Also, the average CH₄ oxidation in the landfill cover soil was 52.5 %. The CH₄ and CO₂ emissions did not show fixed-pattern temporal variation based on daytime measurements. Statistically, a negative relationship was found between CH₄ emissions and oxidation (R ²?=?0.46). It can be concluded that the variation in the CH₄ oxidation was mainly attributed to the properties of the landfill cover soil.