Phytoremediation of levonorgestrel in aquatic environment by hydrophytes

Adsorption and degradation of levonorgestrel （LNG） by two hydrophytes, Cyperus alternfolius （CA） and Eichhornia crassipes （EC）, were investigated under light-shielding conditions in the water column. Variations of LNG concentrations in water, plant root epidermis, root, stem and leaf of the plants were analyzed. The results indicated that the removal efficiency of LNG by hydrophytes over the period of 50 days was significantly greater than the blank control （p 〈 0.05）, with the removal rates of 79.80%± 3.10% and 78.86% ± 2.55% for CA and EC, respectively. Compared with bio-adsorption, bio-conversion of LNG was found to be the dominant elimination pathway, evidenced by relatively high conversion rates （77.31% ±2.68% for CA and 77.82% ± 2.95% for EC）, while the adsorption rates were lower （1.77% ± 0.90% for CA and 1.05% ± 0.40% for EC）. The bio-adsorption and conversion of LNG showed no significant differences between the two hydrophytes. Additionally, the mineralization on root epidermis played an important role in the reduction of LNG in water.     

Arbuscular mycorrhizal fungal phylogenetic groups differ in affecting host plants along heavy metal levels

Arbuscular mycorrhizal fungi（AMF） are important components of soil microbial communities,and play important role in plant growth. However, the effects of AMF phylogenetic groups（Glomeraceae and non-Glomeraceae） on host plant under various heavy metal levels are not clear. Here we conducted a meta-analysis to compare symbiotic relationship between AMF phylogenetic groups（Glomeraceae and non-Glomeraceae） and host plant functional groups（herbs vs. trees, and non-legumes vs. legumes） at three heavy metal levels. In the meta-analysis, we calculate the effect size（ln（RR）） by taking the natural logarithm of the response ratio of inoculated to non-inoculated shoot biomass from each study. We found that the effect size of Glomeraceae increased, but the effect size of non-Glomeraceae decreased under high level of heavy metal compared to low level. According to the effect size, both Glomeraceae and non-Glomeraceae promoted host plant growth, but had different effects under various heavy metal levels. Glomeraceae provided more benefit to host plants than non-Glomeraceae did under heavy metal condition, while non-Glomeraceae provided more benefit to host plants than Glomeraceae did under no heavy metal. AMF phylogenetic groups also differed in promoting plant functional groups under various heavy metal levels.Interacting with Glomeraceae, herbs and legumes grew better than trees and non-legumes did under high heavy metal level, while trees and legumes grew better than herbs and non-legumes did under medium heavy metal level. Interacting with non-Glomeraceae, herbs and legumes grew better than trees and non-legumes did under no heavy metal. We suggested that the combination of legume with Glomeraceae could be a useful way in the remediation of heavy metal polluted environment.     

多输入多输出(MIMO)振动试验技术

多输入多输出(MIMO)振动试验由于可以更好的模拟产品的真实工作环境,是振动试验的一个发展方向。本文分析了其产生需求的根本原因,同时介绍了国内外的发展现状及其应用情况,之后对MIMO试验系统进行了分类,介绍了试验控制器和控制方法,并探讨了其工程实施所存在困难。最后针对我国MIMO试验技术的发展提出了建议,并对前景进行了展望。     

土壤重金属污染及其修复技术研究

土壤重金属污染物有汞、镉、铅、锌等,主要来源于交通运输、工业污染和农业污染。土壤重金属污染会导致农作物减产甚至死亡,对人体健康也会产生极大危害。目前土壤重金属污染修复的技术主要包括工程修复法、物理化学修复法、化学修复法和生物修复法。植物修复技术作为一种新兴的绿色、生态、高效的修复技术具有良好的发展前景。     

污泥热解残渣制备聚合氯化铝的实验研究＊

含铝污泥热解或焚烧残渣制备聚合氯化铝的研究,有利于实现污水处理过程投加的铝盐絮凝药剂的回收与高效循环利用,减少污染物排放和资源消耗。针对辽河油田欢三联稠油污水处理污泥的热解残渣具有较高铝含量的特点,开展采用盐酸进行铝溶出及制备聚合氯化铝的实验研究。结果表明:焙烧温度为700～750℃,焙烧时间控制在1h即可。将经过焙烧活化的残渣在常温下进行酸溶,酸溶时间为2～5h,选用25%～30%盐酸,氧化铝与盐酸的摩尔比为1∶1.0～1∶1.2为宜。将溶出的铝溶液制备聚合氯化铝,在常温下采用CaO粉末来调节pH值为3.5,聚合反应时间为1d,即可得聚合氯化铝溶液。     

秦皇岛市土壤侵蚀的特点、原因及保护对策

土壤侵蚀是一种危害严重、分布范围广的生态环境问题,影响人与自然的和谐共存,以及各业生产的可持续发展。通过分析秦皇岛市土壤侵蚀特点、原因,提出综合治理土壤侵蚀的对策和措施,以期为今后该区土壤侵蚀防治与治理提供科学依据。     

Review of the progress in preparing nano Ti02： An important environmental engineering material

TiO2 nanomaterial is promising with its high potential and outstanding performance in photocatalytic environmental applications, such as CO2 conversion, water treatment, and air quality control. For many of these applications, the particle size, crystal structure and phase, porosity, and surface area influence the activity of TiO2 dramatically. TiO2 nanomaterials with special structures and morphologies, such as nanospheres, nanowires, nanotubes, nanorods, and nanoflowers are thus synthesized due to their desired characteristics. With an emphasis on the different morphologies of TiO2 and the influence factors in the synthesis, this review summarizes fourteen TiO2 preparation methods, such as the sol-gel method, solvothermal method, and reverse micelle method. The TiO2 formation mechanisms, the advantages and disadvantages of the preparation methods, and the photocatalytic environmental application examples are proposed as well.     

彻底封闭烟气旁路挡板的可行性探索

随着环保标准的进一步提高,部分新建火电厂不再设置烟气旁路挡板,现有机组彻底封闭旁路挡板也是未来趋势。结合漳山电厂烟囱防腐期间,彻底封闭旁路挡板8个月的运行经验,阐述这种运行方式的逻辑修改和启动方式。经过实践证明,彻底封闭旁路挡板完全可行。     

Photocatalytic activity of TiO2 containing anatase nanoparticles and rutile nanoflower structure consisting of nanorods

A series of TiO2 with different crystal phases and morphologies was synthesized via a facile hydrothermal process using titanium nbutoxide and concentrated hydrochloric acid as raw materials. The photocatalytic activity of the samples was evaluated by degradation of Methyl Orange in aqueous solution under UV-Visible light irradiation. On the basis of detailed analysis of the characterizing results of high-resolution transmission electron microscopy, X-ray powder diffraction measurements, X-ray photoelectron spectroscopy and Brunauer-Emmett-Teller measurement, it was concluded that the photo-activity of the catalyst is related directly to the 3D morphology and the crystal phase composition. An excellent catalyst should have both a futile 3D flower-like structure and anatase granulous particles. The 3D flower-like structure could enhance light harvesting, as well as the transfer of reactant molecules from bulk solution to the reactive sites on TiO2. In addition, the optimum anatase/rutile phase ratio was found to be 80：20, which is beneficial to the effective separation of the photogenerated electron-hole pairs.     

计算流体力学(CFD)中的迭代法及其并行计算方法

应用计算流体力学 (CFD)方法分析事故原因已被广泛采用 ,笔者针对事故理论分析和流体计算过程中 ,运用CFD方法所存在计算量大的问题 ,分析和讨论了几种古典迭代法及其并行计算方法