Efficiency of the anaerobic treatment of the organic fraction of municipal solid waste: collection and pretreatment.

This report is based on several years of co-operation between our research groups and Danish biogas plants. Throughout the years, there has been a fruitful exchange of know-how and experiences in laboratory scale on the one hand and large scale on the other, leading to a better understanding of the principles of the anaerobic digestion process and to an optimization of its large-scale implementation. In order to get an overview of the current situation concerning the treatment of the organic fraction of municipal solid waste (OFMSW) in Denmark, interviews were carried out with operators of the biogas plants where OFMSW is treated and the municipality staff responsible for waste management. With the aim of fulfilling the governmental goal to treat 150,000 tons of OFMSW by the year 2004 mainly by anaerobic digestion, the different municipalities are investigating different concepts of waste collection and treatment. The quality of the OFMSW treated is the key to smooth operation of the biogas process including a high biogas yield and production of an effluent that is feasible for use as fertilizer on agricultural land. Comparison of the different concepts leads to the conclusion that source-sorting of OFMSW in paper bags is preferable to collection in plastic bags and successive separation of plastics in a waste processing treatment plant.     

Energy implications of mechanical and mechanical–biological treatment compared to direct waste-to-energy

Primary energy savings potential is used to compare five residual municipal solid waste treatment systems, including configurations with mechanical (MT) and mechanical–biological (MBT) pre-treatment, which produce waste-derived fuels (RDF and SRF), biogas and/or recover additional materials for recycling, alongside a system based on conventional mass burn waste-to-energy and ash treatment. To examine the magnitude of potential savings we consider two energy efficiency levels (state-of-the-art and best available technology), the inclusion/exclusion of heat recovery (CHP vs. PP) and three different background end-use energy production systems (coal condensing electricity and natural gas heat, Nordic electricity mix and natural gas heat, and coal CHP energy quality allocation).The systems achieved net primary energy savings in a range between 34 and 140 MJ_primary/100 MJ_{input waste}, in the different scenario settings. The energy footprint of transportation needs, pre-treatment and reprocessing of recyclable materials was 3–9.5%, 1–18% and 1–8% respectively, relative to total energy savings. Mass combustion WtE achieved the highest savings in scenarios with CHP production, nonetheless, MBT-based systems had similarly high performance if SRF streams were co-combusted with coal. When RDF and SRF was only used in dedicated WtE plants, MBT-based systems totalled lower savings due to inherent system losses and additional energy costs. In scenarios without heat recovery, the biodrying MBS-based system achieved the highest savings, on the condition of SRF co-combustion. As a sensitivity scenario, alternative utilisation of SRF in cement kilns was modelled. It supported similar or higher net savings for all pre-treatment systems compared to mass combustion WtE, except when WtE CHP was possible in the first two background energy scenarios. Recovery of plastics for recycling before energy recovery increased net energy savings in most scenario variations, over those of full stream combustion. Sensitivity to assumptions regarding virgin plastic substitution was tested and was found to mostly favour plastic recovery.     

Evaluation of Monte Carlo-based calibrations of HPGe detectors for in situ gamma-ray spectrometry

The aim of this work was to evaluate the use of Monte Carlo-based calibrations for in situ gamma-ray spectrometry. We have performed in situ measurements at five different sites in Sweden using HPGe detectors to determine ground deposition activity levels of ¹³⁷Cs from the 1986 Chernobyl accident. Monte Carlo-calculated efficiency calibration factors were compared with corresponding values calculated using a more traditional semi-empirical method. In addition, results for the activity ground deposition were also compared with activity densities found in soil samples. In order to facilitate meaningful comparisons between the different types of results, the combined standard uncertainty of in situ measurements was assessed for both calibration methods. Good agreement, both between the two calibration methods, and between in situ measurements and soil samples, was found at all five sites. Uncertainties in in situ measurements for the given measurement conditions, about 20 years after the fallout occurred, were found to be in the range 15–20% (with a coverage factor k = 1, i.e. with a confidence interval of about 68%).     

Energy intensities and the impact of high energy prices on producing and consuming sectors in Malaysia

The increase in oil prices has put pressure on the global economy. Even economies that have a high degree of self-sufficiency concerning oil products are experiencing rising production costs and price increases for households energy use. Therefore, changes in energy policies are under consideration for countries highly dependent on imported energy as well as countries with a high degree of self-sufficiency. Examination of dependence on cheap energy sources for economic growth in different economic sectors is becoming more important as countries are trying to promote activities that are less energy intense. Among the policy changes under consideration, the adjustment of domestic energy subsidies is of particular interest. The effect of high energy prices on a fast growing economy, such as in Malaysia, is considerable, as the country will shift from being a net exporter of energy to a net importer in less than 10 years. Malaysia until recently has experienced increasing overall energy intensity and the growth up to 2,000 was quite high, especially for electricity intensity. A continued rise in energy intensity will be quite problematic in this new high oil price regime. This paper investigates the impact of rising energy prices on production costs for the different sectors of the Malaysian economy. Input–output (I–O) calculations demonstrate that the impact on the exporting component of the manufacturing sectors is less than for the average production. Therefore the production cost increase caused by, for example, an adjustment in electricity prices of 25% will result in less than 1/2% increase. As the competing countries in world markets are experiencing the same rise in energy costs, including electricity based on fossil fuels, there is no vital argument for not allowing domestic energy prices to adjust to the international price changes.

Factors influencing PM10 emissions from road pavement wear

Accelerated pavement wear is one of the major environmental disadvantages of studded tyres in northern regions and results in increased levels of PM₁₀. Measurements of PM₁₀ in a road simulator hall have been used to study the influence of pavement properties, tyre type and vehicle speed on pavement wear. The test set-up included three different pavements (one granite and two quartzite with different aggregate sizes), three different tyre types (studded, non-studded, and summer tyres) and different speeds (30–70 km h^?1). The results show that the granite pavement was more prone to PM₁₀ production compared to the quartzite pavements. Studded winter tyres yield tens of times higher PM₁₀ concentrations compared to non-studded winter tyres. Wear from summer tyres was negligible in comparison. It was also shown that wear is strongly dependent on speed; every 10 km h^?1 increase yielded an increase of the PM₁₀ concentration of 680 μg m^?3 in one of the simulator experiments.     

Reconnecting to the Biosphere

Humanity has emerged as a major force in the operation of the biosphere, with a significant imprint on the Earth System, challenging social-ecological resilience. This new situation calls for a fundamental shift in perspectives, world views, and institutions. Human development and progress must be reconnected to the capacity of the biosphere and essential ecosystem services to be sustained. Governance challenges include a highly interconnected and faster world, cascading social-ecological interactions and planetary boundaries that create vulnerabilities but also opportunities for social-ecological change and transformation. Tipping points and thresholds highlight the importance of understanding and managing resilience. New modes of flexible governance are emerging. A central challenge is to reconnect these efforts to the changing preconditions for societal development as active stewards of the Earth System. We suggest that the Millennium Development Goals need to be reframed in such a planetary stewardship context combined with a call for a new social contract on global sustainability. The ongoing mind shift in human relations with Earth and its boundaries provides exciting opportunities for societal development in collaboration with the biosphere--a global sustainability agenda for humanity.     

What to Buy? On the Complexity of Being a Critical Consumer

This article criticises the notion that critical/political/ethical consumerism can solve issues related to sustainability and food production. It does this by analysing the complexity of the concept of sustainability as related to food choices. The current trend of pursuing a sustainable food production through critical purchase decisions rather than through regulation is shown to be problematic, as shopping for a more sustainable food system might be much harder than initially believed due to the conflicting values and inherent trade-offs entailed in the different notions of sustainability. Thus, critical consumerism may give way to false expectations as the complexity of choices transpires. One obvious way out is to let decisions regarding food choices be made earlier in the food production chain as well as through new modes of governance engaging members of civil society in their capacity as citizens rather than consumers. This entails complementing society’s reliance on critical consumerism with a citizen-oriented and political process in support of making more sustainable food choices.     

Organohalogen compounds in blubber of Indo-Pacific bottlenose dolphin (Tursiops aduncus) and spinner dolphin (Stenella longirostris) from Zanzibar, Tanzania

Blubber samples of Indo-Pacific bottlenose (Tursiops aduncus) and spinner (Stenella longirostris) dolphins from Zanzibar, East Africa, were analyzed for a wide range of organohalogen compounds. Methoxylated polybrominated diphenyl ethers (MeO-BDEs), presumably biogenic, were found at higher concentrations than anthropogenic organochlorine pesticides (OCPs). Only traces of industrial pollutants, such as polychlorinated biphenyls, were detected. The OCP levels found off Zanzibar were lower than those reported from other regions while MeO-BDE levels were higher. The relative composition of the OCPs indicated recent use of lindane (γ-hexachlorocyclohexane) and aged residues of DDT and technical HCH. Placental transfer was estimated to 2.5% and 0.5% of the total burden of OCPs and MeO-BDEs, respectively. Overall transfer from mother to calf in Indo-Pacific bottlenose dolphins was estimated to 72% and 85% for the OCPs and MeO-BDEs burdens, respectively. Health effects of MeO-BDEs are not known, but structural similarities with well-known environmental toxins are cause for concern.     

A chemosorptive cylindrical denuder designed for personal exposure measurements of isocyanates-evaluation on generated aerosols of 4,4'-methylenediphenyl diisocyanate

A denuder/filter system constructed for solvent-free personal exposure measurements was evaluated for separation of vapour and particulate 4,4'-methylenediphenyl diisocyanate (4,4'-MDI) generated from heated PUR-foam. The two different phases were collected in the denuder and on the filter, respectively, by chemosorption on a polydimethylsiloxane (SE-30)-dibutylamine (DBA) stationary phase. Both repeatability and the total mass concentration of 4,4'-MDI were similar to that obtained from the reference method, in this case an impinger/filter system. The penetration of particles through the denuder at 300 ml min(-1) was nearly 100% in the particle size range 25 to 700 nm, which fits well with the Gormley-Kennedy equation. Denuder/filter sampling of the 4,4'-MDI aerosol at 500 ml min(-1) yielded a phase distribution that was in accordance with the results from the reference method. The method limit of detection was 6 ng m(-3) and 4 ng m(-3) for the denuder and filter, respectively, when using an air sampling flow rate of 300 ml min(-1) and a sampling period of 15 min. This is well below the Swedish occupational exposure limit (OEL) of 50 and 100 microg m(-3) for an 8-hour working day and a 5-min period, respectively.