Experimental investigation of a solar water distillation-cum-drying unit

In this communication, a new design of solar-energy-based water distillation cum drying unit with parabolic reflector has been designed, fabricated, and tested. Bitter gourd and potato slices are chosen as a drying commodity. Thermal performance of the developed system has been evaluated based on the experimental results and using linear regression analysis. Heat transfer coefficients (convective, evaporative, and radiative) for solar distillation system have been observed to be 2.48–4.09, 13.25–52.38, and 8.75–9.66 W/m²°C, respectively. Overall thermal efficiency and exergy efficiency for the distillation system has been found to be 18.77% and 1.2%, respectively. The convective heat transfer coefficient for potato slices are observed higher for initial hours and decreases as the day progresses. The average convective heat transfer coefficients for bitter gourd and potato slices have been observed as 2.18 and 5.04 W/m²°C, respectively. Experimental error in terms of percent uncertainty for bitter gourd and potato slices are found to be 42.93% and 37.06%, respectively. The present design of solar distillation and drying in a single unit could be beneficial for the development of remote, arid, and rural areas.     

Biological Removal of Gaseous Ammonia in Biofilters: Space Travel and Earth-Based Applications

ABSTRACT

Gaseous NH₃ removal was studied in laboratory-scale biofilters (14-L reactor volume) containing perlite inoculated with a nitrifying enrichment culture. These biofilters received 6 L/min of airflow with inlet NH₃ concentrations of 20 or 50 ppm, and removed more than 99.99% of the NH₃ for the period of operation (101, 102 days). Comparison between an active reactor and an autoclaved control indicated that NH₃ removal resulted from nitrification directly, as well as from enhanced absorption resulting from acidity produced by nitrification. Spatial distribution studies (20 ppm only) after 8 days of operation showed that nearly 95% of the NH₃ could be accounted for in the lower 25% of the biofilter matrix, proximate to the port of entry. Periodic analysis of the biofilter material (20 and 50 ppm) showed accumulation of the nitrification product NO₃ ^- early in the operation, but later both NO₂ ^- and NO₃ ^- accumulated. Additionally, the N-mass balance accountability dropped from near 100% early in the experiments to ~95 and 75% for the 20- and 50-ppm biofilters, respectively. A partial contributing factor to this drop in mass balance accountability was the production of NO and N₂O, which were detected in the biofilter exhaust.     

Groundwater resources in India: an arena for diverse competition

There is evidence of a looming groundwater crisis in India. Unlike in the case of surface water, competition around groundwater generally does not result in open conflicts. Measurability and visibility of surface water accord a clearer public perception of water quantities, which leads to conflicts. Groundwater in an aquifer is sourced in a dispersed manner, and boundaries, quantities and interdependencies are less visible or measurable. Hence, groundwater resources go through intense and intricate competition between users and uses before open conflicts begin. Competition occurs with reference to sources rather than around the resource. The interdependency of sources is a function of changing patterns of usage as intricacies of aquifer characteristics come into play. Governance institutions and regulatory frameworks of groundwater need to be sensitive to the various forms in which groundwater competition manifests in different hydrogeological settings, and the consequences of this in terms of access and rights, in relation to issues of equity and justice.     

Analysis of micro-cracks on machined surfaces in dry electrical discharge machining

Micro-crack formation in the heat affected zone in EDM is a common phenomenon and many measures have been perceived to minimize their occurrence. This paper presents a comprehensive and quantitative analysis of micro-crack formation, in terms of length, number and orientation of micro-cracks formed on the machined surfaces. The influence of processing conditions on crack formation is studied using the observations under scanning electron microscope (SEM). The results indicate that the micro-crack formation is the best represented in terms of average crack length. Statistical analysis of the results shows that pulse off-time (T_off), current (I), voltage (V) and electrode rotation speed (N) significantly influence the average crack length in both wall and bottom regions of the machined hole. In dry EDM, micro-crack formation occurs due to segregation of elements in the work surface and inter-diffusion of elements between work, and shield. A comparison of crack formation with the liquid dielectric EDM shows that average length and number density of micro-cracks were lower in the dry EDM than those in the liquid dielectric EDM.     

Analysis of Wet Precipitation of Air Pollutants in Mumbai (India)

Bulk precipitation samples at Mumbai (India) were collectedduring the monsoon seasons of 1991 to 1996 and analysed forionic concentrations using an Ion Chromatograph DIONEX model100. The variability of sulphate to nitrate ratio in rainwaterfluctuates in a wide range from 1.5 to 20 and governed by thesulphate concentrations in the sample. The regression analysisof the data reveals that in the bulk precipitation at Mumbai, SO₄ ^2- is becoming increasingly important relative toNO₃ ^-. The role of meteorological influences onscavenging of air pollutants by rain water has been tried toexplain the phenomena. The computed wet deposition rates for Sand N during 1991–1996 show that the S deposition is higherthan N in all the years. There is a wide fluctuation indeposition rates of S ranging from 2 to 55 kg km² per annum.     

Interaction Effects of Metals and Salinity on Biodegradation of a Complex Hydrocarbon Waste

Abstract

The presence of high levels of salts because of produced brine water disposal at flare pits and the presence of metals at sufficient concentrations to impact microbial activity are of concern to bioremediation of flare pit waste in the upstream oil and gas industry. Two slurry-phase biotreatment experiments based on three-level factorial statistical experimental design were conducted with a flare pit waste. The experiments separately studied the primary effect of cadmium [Cd(II)] and interaction effect between Cd(II) and salinity and the primary effect of zinc [Zn(II)] and interactioneffect between Zn(II) and salinity on hydrocarbon biodegradation. The results showed 42–52.5% hydrocarbon removal in slurries spiked with Cd and 47–62.5% in the slurries spiked with Zn. The analysis of variance showed that the primary effects of Cd and Cd–salinity interaction were statistically significant on hydrocarbon degradation. The primary effects of Zn and the Zn-salinity interaction were statistically insignificant, whereas the quadratic effect of Zn was highly significant on hydrocarbon degradation. The study on effects of metallic chloro-complexes showed that the total aqueous concentration of Cd or Zn does not give a reliable indication of overall toxicity to the microbial activity in the presence of high salinity levels.     

Bright photophase accelerates re-entrainment after experimental jetlag in Drosophila

The efficacy of bright photophase (BP) in accelerating the re-entrainment of Drosophila biarmipes rhythm following 8?h phase advance and delay of light–dark (LD) cycle was examined by subjecting the flies to 24?h LD cycles with dim photophase (DP) at 30?lx and BP at 300?lx. Re-entrainment was analysed by using the activity onset, activity offset and the duration of activity. Following LD advance or delay, the BP flies re-entrained faster than the DP flies which was attributed to the enhanced zeitgeber strength of BP. Nevertheless, the re-entrainment was a protracted process even in the BP flies since the activity offsets underwent more transients than the activity onsets. Thus, this study demonstrates that the BP accelerates the re-entrainment in D. biarmipes. It, however, also reveals that the re-entrainment is a prolonged process when the activity onset and offset are regarded as the rhythm markers.     

Persistence and mobility of 2,4-D in unsaturated soil zone under winter wheat crop in sub-tropical region of India

The present study was undertaken to determine the persistence and mobility of 2,4-dichlorophenoxy acetic acid (2,4-D) in unsaturated soil zone under real field conditions for the wheat crop in Roorkee, India. Three experimental plots were chosen in the agricultural field itself to represent the real field conditions in the study area and the potential movement and persistence of herbicide 2,4-D was investigated under three different irrigation treatments. The presence of herbicide along with soil water content was determined in soil at different depths at a temporal scale. The movement of the herbicide was also simulated numerically by solving the coupled soil water content movement and mass transport equations using HYDRUS-1D. The measured soil water content trends and the 2,4-D concentration profiles showed a good agreement with the numerically simulated results. The maximum effect of the herbicide was primarily retained up to 15 cm of the soil profile. The current existing dosage of 0.5 kg ha⁻¹ of pesticide was found to be safe to avoid soil contamination as no residue of 2,4-D was traced at the end of the wheat crop season in any of the plots. Higher concentrations of 2,4-D were also simulated numerically and the simulated results showed that the safe dosage of pesticide application would depend on irrigation treatments.     

A GFP-based bacterial biosensor with chromosomally integrated sensing cassette for quantitative detection of Hg(II) in environment

A mercury biosensor was constructed by integrating biosensor genetic elements into E. coli JM109 chromosome in a single copy number, using the attP/attB recombination mechanism of λphage. The genetic elements used include a regulatory protein gene (merR) along with operator/promoter (O/P) derived from the mercury resistance operon from pDU1358 plasmid of Serratia marcescens. The expression of reporter gene gfp is also controlled by merR/O/P. Integration of the construct into the chromosome was done to increase the stability and precision of the biosensor. This biosensor could detect Hg(II) ions in the concentration range of 100-1700 nmol/L, and manifest the result as the expression of GFP. The GFP expression was significantly different (P ≤ 0.05) for each concentration of inducing Hg(II) ions in the detection range, which reduces the chances of misinterpretation of results. A model using regression method was also derived for the quantification of the concentration of Hg(II) in water samples.