Assessment of biological effects and harm to Japanese medaka due to carbonized carbon fibers generated by a pyrolysis carbon fiber recycling process

Journal of Material Cycles and Waste Management - Carbon-fiber-reinforced plastics (CFRPs) are used as structural materials in the aircraft and automotive industries owing to their lightweight and...     

Effects of different mobilities of leaf and woody litters on litter carbon dynamics in arid ecosystems in Western Australia

Afforestation of arid land is a promising countermeasure against global warming. We had previously found, through modeling and mass balance analyses of an arid land afforestation experimental project in Western Australia, that a significant amount of litter could have been physically removed from the floors of natural forests. In order to analyze litter carbon dynamics in depth, we investigated the actual mobility of litter in several natural forests in Sturt Meadows in an arid region of Western Australia, and estimated the difference between the removal rate of leaf and woody (twigs and branches) litter on the forest floor. Then we redeveloped a litter carbon dynamics model by incorporating physical removal of litter to show the different mobilities of leaf and woody litters. We also analyzed carbon balances and the effect of differential litter mobility on litter carbon dynamics. Except for twigs in one plot in a high density forest, 29–100% of leaf litter and 10–100% of woody litter was removed annually, demonstrating the physical removal of litter in these natural forests. The main cause of litter removal was wind, not flooding. Decreases in leaf and woody litters could be approximated as first order decay functions in most plots; first order decay or disappearance rate constants were then determined. Estimated disappearance rate constants of leaf and woody litter ranged from 0.19 to 11 and 0.11–12 year⁻¹, respectively; most of the constants ranged from 0.19 to 2.0 and 0.11–0.74 year⁻¹, respectively. Based on the disappearance rate constant, the mobility of woody litter was estimated to be roughly 20% that of leaf litter, confirming that climatic factors move leaves more easily than twigs. The improved model, which took into account the different mobilities of leaf and woody litters, showed that annual physical removal of litter reached 70–82% of the annual litter fall in Acacia aneura forests, and that roughly 40–60% of the existing litter was removed annually from all sites. Incorporating into the model the difference in mobilities of leaf and woody litters showed that the ratio of annual litter removal to annual litter fall increased about 10% points compared with the assumption of that both litter types had equal mobility.     

Di(2-ethylhexyl)phthalate and mono(2-ethylhexyl)phthalate in media for in vitro fertilization

In vitro fertilization (IVF) is one of the most important treatments of infertility to provide a chance of conceiving. In IVF treatment, sperm are washed and motile sperm are isolated with sperm washing media (SWM) for the purpose of fertilization; fertilized ova are then incubated for a maximum of 5 or 6 d in media for IVF (IVFM). The exposure of fertilized ova to chemicals via such media has not been studied. We determined the concentrations of two contaminants; di(2-ethylhexyl)phthalate (DEHP) and its hydrolyzed product mono(2-ethylhexyl)phthalate (MEHP) in IVFM, SWM, and protein sources (PS: human serum albumin or serum substitute) for IVFM and SWM. The DEHP and MEHP in these media were extracted by a liquid-liquid extraction method and their concentrations determined by liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS). Fifteen IVFM, nine SWM, and six PS obtained in Japan were examined. The concentrations of DEHP and MEHP in IVFM and SWM were <10-114 and <2.0-263 ng mL⁻¹, respectively. The concentrations of both DEHP and MEHP were higher in the media containing PS than in those without PS. Either MEHP alone or both DEHP and MEHP were detected in PS. The concentrations of DEHP and MEHP in PS were <10-982 and 47.0-1840 ng mL⁻¹, respectively. The DEHP and MEHP detected in these media were derived from PS. This is the first study on the chemical contamination of IVFM, SWM, and PS.     

Determination of dioxin concentrations in fish and seafood samples using a highly sensitive reporter cell line, DR-EcoScreen cells

There is a strong need for the development of relatively rapid and low-cost bioassays for the determination of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), and dioxin-like polychlorinated biphenyls (dl-PCBs) in environmental and food samples. In this study, we applied a reporter gene assay using DR-EcoScreen cells (DR-cell assay), which is highly sensitive to dioxins, to the determination of PCDD/Fs and dl-PCBs in fish and seafood samples. The PCDD/Fs and dl-PCBs were extracted from homogenated samples (10 g) of 30 fish and shellfish, purified by clean-up procedure using a multilayered silica gel column and an alumina column, and applied to DR-cell assay. Interestingly, the bioanalytical equivalent (BEQ) values obtained from the DR-cell assay [<0.1 ∼ 5.4 pg BEQ g⁻¹ wet weight (ww)] were closely correlated with the toxicity equivalent (TEQ) values from conventional high-resolution gas chromatography/high-resolution mass spectrometry (HRGC-HRMS) analysis (r² = 0.912), and the slope of regression line was 0.913. Therefore, we multiplied the BEQ values from the DR-cell assay by a conversion coefficient (1.095, the reciprocal of 0.913) to approximate the TEQ values from the HRGC-HRMS analysis. Furthermore, we used this DR-cell assay to perform a prescreening test of PCDD/Fs and dl-PCBs in 16 fish and seafood samples purchased from a supermarket, revealing that a sample from the fatty flesh of a bluefin tuna exceeded 8 pg TEQ g⁻¹ ww (the European Union-tolerance limit). Taken together, these results suggest that the DR-cell assay might be applicable as a rapid and low-cost prescreening method to determine dioxin levels in fish and seafood samples.     

Destruction of Chlorofluorocarbons in a Cement Kiln

Abstract

One of the thermal oxidation technologies recommended by the United Nations Environment Programme (UNEP) is destruction of chlorofluorocarbons (CFCs) in a cement kiln. The destruction of CFC12, CFC11 and CFC113 was studied in a cement kiln plant in actual commercial operation. CFCs were completely destroyed in the kiln under normal operating conditions. Hydrogen fluoride and hydrogen chloride generated by CFC decomposition were absorbed by cement materials. No formation of toxic ha-logenated organic compounds, such as polychlorinated dibenzo-p-dioxins or dibenzofurans (PCDDs/PCDFs), was observed in the CFC incineration.     

Influence of the Hydrothermal Pre-treatments on the Adsorption Characteristics of Activated Carbons from Woods

The hydrothermal treatments were conducted prior to the carbonization of oak woods and the obtained charcoals were activated using carbon dioxide or water vapor. The hydrothermal treatments brought about the elutions of acid-soluble lignin fractions as well as hemicellulose fractions accompanied with the decomposition of lignin carbohydrate complexes in the cell walls, which lowered not only the carbon yield of charcoal but also the crystal parameters for the carbon crystallites. However, the activated carbons (AC) produced via the hydrothermal pre-treatment showed superior adsorption properties especially for the adsorptions of 2-methylisoborneol and geosmin as compared with the untreated commercial AC. The hydrothermal treatments prior to the carbonization have some potential to increase the fractions of meso-pores effective for the adsorption of globular shaped molecules.     

Polychlorinated biphenyl (118) activates osteoclasts and induces bone resorption in goldfish

To analyze the effect of polychlorinated biphenyl (PCB) 118 on fish bone metabolism, we examined osteoclastic and osteoblastic activities, as well as plasma calcium levels, in the scales of PCB (118)-injected goldfish. In addition, effect of PCB (118) on osteoclasts and osteoblasts was investigated in vitro. Immature goldfish, in which the endogenous effects of sex steroids are negligible, were used. PCB (118) was solubilized in dimethyl sulfoxide at a concentration of 10 ppm. At 1 and 2 days after PCB (118) injection (100 ng/g body weight), both osteoclastic and osteoblastic activities, and plasma calcium levels were measured. In an in vitro study, then, both osteoclastic and osteoblastic activities as well as each marker mRNA expression were examined. At 2 days, scale osteoclastic activity in PCB (118)-injected goldfish increased significantly, while osteoblastic activity did not change significantly. Corresponding to osteoclastic activity, plasma calcium levels increased significantly at 2 days after PCB (118) administration. Osteoclastic activation also occurred in the marker enzyme activities and mRNA expressions in vitro. Thus, we conclude that PCB (118) disrupts bone metabolism in goldfish both in vivo and in vitro experiments.     

Investigation of the soil radon variation during the winter months in Sapporo, Japan

Soil radon was measured from late October 2000 to January 2001 at three test sites on the campus of Hokkaido University in Sapporo, Japan. Factors affecting radon concentrations were investigated with relation to meteorological data, as well as soil 226Ra content, mineral composition, water content, and pH, Eh and conductivity. Soil radon varied with time and with sampling site appreciably, in a manner unaltered by the surface geology. However, the ratio of radon isotopes (220Rn/222Rn) in the soil was constant within each sampling site, regardless of varying concentration of these nuclides during the monitoring period. Snow covering on the soil surfaces may affect the 222Rn concentration.     

Environmental conditions for the formation of insoluble Tc in water ponds located above paddy fields

Optimum conditions for the formation of insoluble Tc (Tc in >0.2 microm size fraction) were studied using a microcosm including water ponds above a paddy field to understand Tc behavior in such fields. In the microcosm, soluble TcO(4)(-) was converted to insoluble forms, but no changes in the form of Tc were observed in filtered microcosm samples which were microorganisms-free. The formation of insoluble Tc was inhibited by the addition of the antibiotic chloramphenicol. In addition, the reduction of soluble Tc(VII)O(4)(-) to low-valence oxide was not observed in the filtered microcosm samples, although reducing conditions were present. These results indicated that bacteria were involved in the formation of insoluble Tc. Since oxidizing conditions influence bacterial metabolism, the formation of insoluble Tc by bacteria was studied under aerobic and anaerobic conditions. The results showed that anaerobic conditions were favorable for the formation of insoluble Tc. In addition, the addition of formate as an electron donor to a microcosm sample facilitated the formation of insoluble Tc. The results suggested that insoluble Tc in the water ponds above paddy fields was caused by bacteria, which were shown to couple the oxidation of formate to the reduction of Tc(VII) during anaerobic respiration.     

Fabrication Mechanical Properties of Unidirectional Jute/PP Composites Using Jute Yarns by Film Stacking Method

This paper mainly focuses on the fabrication process of long fibre reinforced unidirectional thermoplastic composites made using both natural (untreated) treated jute yarns. Jute yarns were wound in layers onto a metallic frame. Polypropylene films were inserted between these layers and compression moulded to fabricate unidirectional jute/PP composite specimens. Static mechanical properties were evaluated from tensile three point bending tests. Pre- post-failure examination were carried out on the test specimens using optical scanning electron microscopy to analyse the test results and investigate the correlations between their impregnation state, processing conditions, mechanical performances and fracture morphologies. For the unidirectional jute/PP film-stacked composites, the results indicated that the processing condition at the moulding temperature of 160°C and moulding pressure of 2.0 MPa for 15 min was ideally suited to obtain optimized properties. Improved wettability of resin melts due to complete matrix fusion at this processing condition facilitated thorough impregnation with minimum microstructural imperfections (microvoids) being generated. Jute/PP composites that contained treated jute yarns have shown superiority in tensile bending properties. Jute yarns polished or coated with PVA/PP (polyvinyl alcohol/polypropylene) must have contributed positively to fibre/matrix interfacial interactions leading to matrix to fibre effective stress transfer, thereby improving their reinforcing effects. Tensile strength and modulus of PP resin increased by approximately 285% and 388%, respectively, due to 50 wt% reinforcement by natural jute yarns. Further improvements in strength and modulus were achieved by approximately 14% and 10%, respectively, when treated yarns were used . The maximum bending stress modulus of jute/PP composites containing untreated yarns were approximately 190% and 460% higher than those of the virgin PP materials, and bending properties were improved by further 11% and 23%, respectively, due to coating treatments on the yarn surface.