Herbivory mediates grass-endophyte relationships

Endophytic fungi are plant symbionts living asymptomatically within plant tissues. Neotyphodium spp., which are asexual vertically transmitted systemic fungal endophytes of cool-season grasses, are predicted to be plant mutualists. These endophytes increase host plant resistance to environmental stresses and/or increase the production of alkaloid-based herbivore deterrents. The ubiquity of this defense mutualism is unclear, and a variety of alternative mechanisms may explain the observed variation in infection rates, levels of deterrence, and the maintenance of asexual endophytes in grass populations. We found that grass-endophyte interactions are variable and ordered along an herbivory gradient in an undisturbed subarctic alpine ecosystem. Native grass populations in grazed sites had significantly greater frequency of Neotyphodium infection compared to ungrazed sites. Tillers from grazed sites had significantly higher hyphal densities compared to ungrazed sites. The ability of grass-Neotyphodium constituents to deter vertebrate herbivory in natural systems is thought to be rare. In grazed meadows, we showed that endophyte infection resulted in the deterrence of grazing by native vertebrate herbivores. However, the same herbivores did not distinguish between infected and uninfected grass harvested from ungrazed areas. These results demonstrate that the relationship between vertically transmitted endophytes and grasses in the alpine tundra vary greatly within populations. This may be based in part on defense mutualism and is consistent, under varying levels of herbivory, with the predictions of optimal defense theory.     

Assessing anthropogenic impact on Mediterranean sand dunes from aerial digital photography

The Mediterranean region plays host to ca. 33% of the world’s tourism industry. This population of visitors (ca. 147 million in 1990) inevitably exerts an enormous impact on the natural resources of this coastal zone. In May 1997, a new generation Aerial Digital Photographic System [ADPS] configured with a Kodak Digital Science 460 CIR digital camera was used to acquire colour infrared digital photographs of the sand dune systems along the Mediterranean coast of France, from Le Barcares to St-Cyprien-Plage. These have been used to assess the condition of the dunes along this coast. A series of simple analytical techniques to identify and measure features indicative of public pressure using image processing software has been devised. The dune manager with basic computer skills can analyse such indicators as path length, vegetation cover (and conversely the extent of bare sand) to enable monitoring of the performance of their dune systems under particular management regimes. These photographs have been compared with similar digital photographs of dune sites in SW France to allow a comparison of dune degradation in a region with a different population pressure and climate regime. Dune systems sampled from the Mediterranean coastal zone showed more evidence of anthropogenically induced change than those sampled in SW France.     

Assessment of soil washing for heavy metal contaminated paddy soil using FeCl3 washing solutions

Environmental Geochemistry and Health - In this study, soil washing is applied for the remediation of heavy-metal (Pb, Cu and Zn) contaminated paddy soil located near an abandoned mine area. FeCl3...     

Polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), biphenyls (PCBs), and polycyclic aromatic hydrocarbons (PAHs) and 2,3,7,8-TCDD equivalents (TEQs) in sediment from the Hyeongsan River, Korea

Sediment, pore water and water samples from the Hyeongsan River, Korea were analyzed for several classes of halogenated aromatic hydrocarbons (HAHs) and their dioxin-like activities were evaluated using the in vitro H4IIE-luc bioassay. Polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and biphenyls (PCBs) were detected in sediments from all six sampling locations with mean concentrations of 2.8 x 10(2) pg/g, 190 pg/g, and 61.4 ng/g, dw, respectively. Polycyclic aromatic hydrocarbons (PAHs) were predominated by 4-6 ring compounds with concentrations in the range of 5.30-7680 ng/g, dw. Chemical profiles of target analytes in sediment and water samples revealed that there was a gradient of concentrations along the river from upstream to downstream, which suggested that the primary source was a wastewater reservoir adjacent to a sewage treatment plant (STP). TEQs derived by summing the product of concentrations of individual congeners by their respective relative potencies (REPs or TEFs) ranged from 4.3 x 10(-1) to 1.1 x 10(3) pg/g, dw. Raw Soxhlet extracts from all six sampling locations induced significant dioxin-like responses in the H4IIE-luc bioassay. TCDD-EQs derived from H4IIE bioassay ranged from 7 x 10(-3) to 1.5 x 10(3) pg/g, dw, which were significantly correlated with TEQs (r2 = 0.994, p < 0.05). Among the three Florisil fractions tested, PCDD/Fs in fraction (F2) induced the greatest magnitude of response (range: 24-83%-TCDD-max.) in the H4IIE-luc assay. Comparison of the TEQ and TCDD-EQ suggested little non-additive interaction between fractions and AhR-active and inactive compounds. Concentrations of individual congeners as well as TEQs and TCDD-EQs suggest inputs from the industrial center waste stream in the Hyeongsan River.     

Protocol for early detection and evaluation of inhibitory wastewater using combined aerobic respirometric and anaerobic batch techniques.

Faced with the task of treating significant volumes of complex industrial wastewaters, the biological components of municipal wastewater treatment plants are operating under the risk of toxic or inhibitory contaminants from the industrial effluents that may be detrimental to their operation. This might lead to undesirable effluent toxicity and/or result in permit violations. Therefore, there is a need for upset early warning systems that can protect full-scale plants from toxic or inhibitory constituents in the incoming wastewaters. This study focused on the development of a protocol for rapid detection of potentially toxic inhibitory or toxic wastewaters using combined aerobic respirometric and anaerobic batch techniques. Aerobic respirometers equipped with automated data acquisition systems were used as potential early warning devices. The inhibition effect on carbon and nitrogen oxidation was assessed. The degree of inhibition was evaluated as the concentration causing 50% reduction in microbial activity, which was estimated by an inhibition model. Anaerobic toxicity assays were also conducted to evaluate the inhibitory effects of the toxic compounds to anaerobic inocula obtained from a master culture reactor fed with ethanol. The developed protocol for early detection of toxicity was validated using wastewater samples from a biotechnology industry and a food processing industry, and pure chemicals such as furfural and phenol. Varying degrees of sensitivity were observed in the study when different groups of microorganisms, wastewater samples, and chemicals were tested. The comparison of aerobic and anaerobic inhibition suggested the importance of using both aerobic and anaerobic cultures to maximize the necessary sensitivity of the protocol.     

Catalytic oxidation for air pollution control

Bench-scale experiments have been conducted to evaluate a series of titania-supported Pt-Pd (as oxides) catalysts in the presence and absence of MoO₃ and Fe₂O₃ additives for their effectiveness in the complete catalytic oxidation of volatile organic compounds (VOCs) in air likely to be found in waste gases. Under oxidizing conditions, all of the catalysts promoted the complete oxidation of VOCs to CO₂ and H₂O. 99 % Conversion was achieved with a C₂H₄-C₂H₆ gas mixture in air at temperatures between about 160–450 °C and at a space velocity of 20,000 h^?1. Oxidation activity for the titania supported catalysts were found to decrease in the order Pt-Pd-Mo-Fe > Pt-Pd-Mo > Pt-Pd-Fe > Pt-Pd. However, the addition of MoO₃ and Fe₂O₃ increase the catalyst activity and reduce the reaction temperature for the complete destruction. Ageing was also performed in order to study the stability of the most active catalyst. Pt-Pd-Mo-Fe (as oxides) on titania catalyst is effective in oxidizing a wide range of volatile organic compounds at relatively low temperatures (220–405 °C) and and at a space velocity of 40,000 h^?1 and is resistant to poisoning by halogenated and amine volatile organic compounds.     

Ecology of marine fouling organisms at Eastern Johore Strait

Marine biofouling causes problems to marine structure and obstructs condenser tubes in cooling systems which use sea water as the coolant. The main purpose of this study is to investigate the seasonal ecology of biofouling organisms such as the green mussel, Perna viridis, the dominant fouling species in the Eastern Johore Straits at the Senoko Power Station. The spawning time and its relationship with environmental conditions were studied. The physical, chemical and biological conditions of the sea at Senoko were monitored for a year. Settling slides were used to study the fouling succession in different monsoon seasons. The study showed that there were two main spawning peaks for the green mussel and that these peaks occurred during the intermonsoon months of November and April. These peaks were also correlated with the bimodal patterns for salinity, dissolved oxyen, bivalve veliger larval density and total plankton biomass of the Eastern Johore Strait water. Succession patterns were similar during the two monsoon seasons, however, the rate of fouling was probably greater during the southwest monsoon months. It is therefore advisable that the control or reduction of biofouling in Eastern Johore Strait should take into account the seasonal fluctuations and spawning of the fouling organisms.     

Impact Modeling of Sewage Discharge From Georgetown of Penang, Malaysia on Coastal Water Quality

Currently about 200,000 persons of the Penang Georgetown population is served by a sewerage system which conveys the raw sewage to an open channel flume in Jelutong for discharge into the Western Channel. This has resulted in the degradation of coastal water quality in the affected areas. Therefore, there exists an urgent need to look for other alternatives for sewage treatment and disposal. This paper presents the results of computer simulations on the impacts of sewage discharge on Penang coastal waters under two treatment and disposal options. The preferred option is a conventional activated sludge treatment system capable of treating the sewage to secondary level with a submerged outfall to the Western Channel for the disposal of the treated effluent. The results of computer simulations show that the quality of coastal waters, other than in the immediate vicinity of the discharge point, would be able to achieve the Malaysian proposed criterion for recreational waters up to year 2020.     

Factors affecting the leaching of lead from UPVC pipes

This paper summarizes the results of a series of studies on the various factors that affect the leaching of lead from unplasticized poly(vinyl chloride) (UPVC) pipes. Factors that were studied include temperature, pH and extractants. Results showed that, for a given UPVC pipe, the rate of leaching of lead depended primarily on temperature and the nature of extractants. While the rate of leaching of lead was quite low with distilled water, it was very much enhanced by the presence of low concentration of anions such as Cl^-, HPO _inf4 ^sup2- HCO _inf3 ^sup- , NO _inf3 ^sup- , SO _inf4 ^sup2- and EDTA. EDTA, being a strong complexing agent, was most effective. Rates of leaching were found to be higher at elevated temperature except in the cases of HPO _inf4 ^sup2- and EDTA. Effect of pH was not pronounced. The temperature at which the UPVC pipes were extruded was found to affect the rate of leaching of lead. Pipes extruded at 190°C were found to have lower rate of leaching than those extruded at 180°C and 170°C. Analysis of the pipes by Scanning Electron Microscopy showed that the distribution of lead in the pipes extruded at 190°C was more uniform than those extruded at 170°C.     

Poly(sodium acrylamidoalkanoates) in water treatment

Poly(sodium 6-acrylamidocaproate), poly(sodium 11-acrylamidoundecanoate), poly(sodium 11-N-methylacrylamidoundecanoate) and poly(sodium 11-N-ethylacrylamidoundecanoate) have been synthesized. The performance of these anionic polyelectrolytes as coagulant aids in water treatment was assessed by the jar test. The effects of polymer dosage and pH on their performances were investigated in order to establish the optimum flocculation conditions. The effectiveness of these polyelectrolytes as well as a commercially available cationic polyamine organic coagulant aid was compared in terms of floc size, settling rate and the quality of treated water. Poly(sodium 6-acrylamidocaproate) and poly(sodium 11-acrylamidoundecanoate) were superior to poly(sodium 11-N-methylacrylamidoundecanoate) and poly(sodium 11-N-ethylacrylamidoundecanoate), and they are as effective as the commercial cationic coagulant aid.