Simultaneous removal of ammonia and N-nitrosamine precursors from high ammonia water by zeolite and powdered activated carbon

When adding sufficient chlorine to achieve breakpoint chlorination to source water containing high concentration of ammonia during drinking water treatment, high concentrations of disinfection by-products(DBPs) may form. If N-nitrosamine precursors are present, highly toxic N-nitrosamines, primarily N-nitrosodimethylamine(NDMA), may also form. Removing their precursors before disinfection should be a more effective way to minimize these DBPs formation. In this study, zeolites and activated carbon were examined for ammonia and N-nitrosamine precursor removal when incorporated into drinking water treatment processes.The test results indicate that Mordenite zeolite can remove ammonia and five of seven N-nitrosamine precursors efficiently by single step adsorption test. The practical applicability was evaluated by simulation of typical drinking water treatment processes using six-gang stirring system. The Mordenite zeolite was applied at the steps of lime softening, alum coagulation, and alum coagulation with powdered activated carbon(PAC) sorption. While the lime softening process resulted in poor zeolite performance, alum coagulation did not impact ammonia and N-nitrosamine precursor removal. During alum coagulation, more than67% ammonia and 70%–100% N-nitrosamine precursors were removed by Mordenite zeolite(except 3-(dimethylaminomethyl)indole(DMAI) and 4-dimethylaminoantipyrine(DMAP)). PAC effectively removed DMAI and DMAP when added during alum coagulation. A combination of the zeolite and PAC selected efficiently removed ammonia and all tested seven N-nitrosamine precursors(dimethylamine(DMA), ethylmethylamine(EMA), diethylamine(DEA), dipropylamine(DPA), trimethylamine(TMA), DMAP, and DMAI) during the alum coagulation process.     

β-环糊精/环氧氯丙烷聚合物的制备及其对双酚S的吸附特性

BPS（双酚S）用途广泛,但存在水环境污染问题,容易引起类似于双酚A的雌激素反应,因此需要寻求高效的吸附剂从水溶液中将其脱除.在NaOH水溶液中,以环氧氯丙烷为交联剂,合成了β-CDP（β-环糊精/环氧氯丙烷聚合物）,用于吸附水溶液中的BPS.基于此,考察了吸附时间、pH、初始ρ（BPS）、β-CDP用量对吸附性能的影响以及β-CDP的再生性能,探讨了吸附动力学、等温吸附模型和吸附机理.结果表明:①在温度为298 K、pH为5.4、β-CDP用量为0.05 g、初始ρ（BPS）为100 mg/L、BPS溶液体积为50 mL、吸附时间为60 min的条件下,BPS吸附量为69.7 mg/g,吸附率为69.7%;②吸附动力学符合准二级动力学模型,表明化学吸附为速率控制步骤;③Langmuir吸附等温模型的成功拟合表明,吸附BPS在β-CDP表面上形成了单分子层覆盖;④β-CDP吸附BPS为放热过程,低温有利于吸附的进行;⑤与初始吸附量（69.7 mg/g）相比,β-CDP连续再生6次,BPS吸附量仍可达68.1 mg/g;⑥吸附机理是通过BPS的羟基与β-CDP形成氢键作为推动力,并借助β-CD（β-环糊精）空腔内部的疏水作用,使得BPS进入空腔形成包结物.研究显示,β-CDP对水溶液中的BPS具有良好的吸附性能,再生循环使用稳定性高,具有较高的性价比.      

紫外诱变选育高原环境絮凝菌及其絮凝条件优化

为获得耐低温且絮凝优异的絮凝菌,对一株分离得到的絮凝菌进行紫外诱变和5℃低温胁迫培养,并对诱变优势菌进行应用条件优化.结果表明:①原始菌为蜡状芽孢杆菌（Bacillus cereus）.②紫外诱变和低温胁迫培养得到的目标诱变菌FB-5对生活污水絮凝率达75.35%,具有良好的遗传稳定性.③单因素试验确定最佳絮凝条件,即絮凝菌投加量为0.90 mL/（50 mL）、pH为7.4、助凝剂加量为1.0 mL/（50 mL）、处理时间为15 min;筛选出影响诱变菌絮凝能力最显著的3个因素为絮凝菌投加量、pH和助凝剂加量;通过Box-Behnken响应面试验得到最佳净化的应用条件,即絮凝菌投加量为0.90 mL/（50 mL）、pH为7.38、助凝剂加量为1.04 mL/（50 mL）.④验证试验确定絮凝率达97.01%,BOD₅、COD_Cr、浊度和色度去除率均达到97%以上,出水水质满足GB 18918—2002《城镇污水处理厂污染物排放标准》一级A标准.研究显示,紫外诱变联合低温胁迫技术以及单因素与响应面结合优化絮凝条件可以大幅度提高原始菌株的絮凝能力,低温诱变菌FM-5能使高寒地区城市生活污水中悬浮固体大幅降低,同时去除水体中多种污染物.      

中国国家公园建设潜在区域识别研究

国家公园是保护具有国家代表性资源的自然生态区域,建设国家公园体制是中国国土生态安全保障和生态文明体制改革的重要内容。论文基于国际经验、国家公园功能和政策内涵,依据国家公园主导定位和生态系统服务理念,构建了包含6个关键指标的综合评价模型,包括生态系统完整性、生态重要性、原真性、生物多样性、自然景观价值与人文遗产价值,分别进行单一要素层评价和多指标空间叠加分析,再结合中国生态地理区划、生态功能区划和省级行政区管理等因素进行比对和范围遴选提取,初步确定了中国国家公园建设的潜在区域。结果表明,生态系统完整性、生态重要性、生物多样性、原真性的高值集聚区域具有趋同性,生态系统完整性较好的区域,承担着重要的生态功能,生物多样性也较高,原真性保存较好。中国三大阶梯与自然地理区域的叠加分布特征明显,东西部潜在区域的面积差异较大,西部地区的空间连续性较强,潜在区域的跨界性较为明显。初步遴选出55处未来可以重点考虑建设的陆地型国家公园潜在区域。研究可为中国国家公园建设合理布局提供方法参考和理论借鉴。     

基于GIS格网化分析支撑的旅游空间规划技术方法研究——以青岛市为例

空间规划是支撑旅游地发展规划的核心章节,目前主要依靠规划者经验判断,主观性较强,缺乏客观方面的信息数据支持。论文将GIS格网化与旅游资源评价模型相结合,提出了旅游资源单体采集、旅游资源格网化及其空间分析方法,并融合旅游资源群评价模型、旅游功能区识别模型、旅游线路和空间发展轴线识别模型予以支撑,形成了标准化的旅游资源采集、评价到空间识别的集成技术方法;并以青岛市为例,识别出了旅游资源集群及其发展潜力、旅游功能区和空间拓展轴线,确立了“一心、一带、三轴、五区”的空间发展格局。论文初步探讨了GIS格网化空间分析方法在区域旅游规划中的应用,能够补充传统定性评价方法客观性不足的缺陷,实现复杂旅游资源数据的单体评价、旅游资源集群评价、旅游功能区识别、旅游线路和空间发展轴线优选的系列化分析技术路线,可为延伸旅游规划深度、提高规划精度提供科学参考。     

Long-term observations of tropospheric NO2, SO2 and HCHO by MAX-DOAS in Yangtze River Delta area, China

Yangtze River Delta(YRD) area is one of the important economic zones in China. However,this area faces increasing environmental problems. In this study, we use ground-based multi-axis differential optical absorption spectroscopy(MAX-DOAS) network in Eastern China to retrieve variations of NO_2, SO_2, and formaldehyde(HCHO) in the YRD area. Three cities of YRD(Hefei, Nanjing, and Shanghai) were selected for long-term observations. This paper presents technical performance and characteristics of instruments, their distribution in YRD, and results of vertical column densities(VCDs) and profiles of NO_2, SO_2, and HCHO.Average diurnal variations of tropospheric NO_2 and SO_2 in different seasons over the three stations yielded minimum values at noon or in the early afternoon, whereas tropospheric HCHO reached the maximum during midday hours. Slight reduction of the pollutants in weekends occurred in all the three sites. In general trace gas concentrations gradually reduced from Shanghai to Hefei. Tropospheric VCDs of NO_2, SO_2, and HCHO were compared with those from Ozone Monitoring Instrument(OMI) satellite observations, resulting in R~2 of 0.606, 0.5432, and 0.5566, respectively. According to analysis of regional transports of pollutants, pollution process happened in YRD under the north wind with the pollution dissipating in the southeast wind. The feature is significant in exploring transport of tropospheric trace gas pollution in YRD, and provides basis for satellite and model validation.     

Insights into the formation of secondary organic carbon in the summertime in urban Shanghai

To investigate formation mechanisms of secondary organic carbon(SOC) in Eastern China,measurements were conducted in an urban site in Shanghai in the summer of 2015. A period of high O_3 concentrations(daily peak 120 ppb) was observed, during which daily maximum SOC concentrations exceeding 9.0 μg/(C·m~3). Diurnal variations of SOC concentration and SOC/organic carbon(OC) ratio exhibited both daytime and nighttime peaks. The SOC concentrations correlated well with O_x(= O_3+ NO_2) and relative humidity in the daytime and nighttime, respectively, suggesting that secondary organic aerosol formation in Shanghai is driven by both photochemical production and aqueous phase reactions. Single particle mass spectrometry was used to examine the formation pathways of SOC. Along with the daytime increase of SOC, the number fraction of elemental carbon(EC) particles coated with OC quickly increased from 38.1% to 61.9% in the size range of 250–2000 nm, which was likely due to gas-to-particle partitioning of photochemically generated semi-volatile organic compounds onto EC particles. In the nighttime, particles rich in OC components were highly hygroscopic, and number fraction of these particles correlated well with relative humidity and SOC/OC nocturnal peaks. Meanwhile, as an aqueous-phase SOC tracer, particles that contained oxalate-Fe(III) complex also peaked at night. These observations suggested that aqueous-phase processes had an important contribution to the SOC nighttime formation. The influence of aerosol acidity on SOC formation was studied by both bulk and single particle level measurements, suggesting that the aqueous-phase formation of SOC was enhanced by particle acidity.     

Alkali resistance promotion of Ce-doped vanadium-titanic-based NH3-SCR catalysts

The effect of K deactivation on V_2O_5/WO_3-TiO_2 and Ce-doped V_2O_5/WO_3-TiO_2 catalysts in the selective catalytic reduction(SCR) of NOxby NH_3 was studied.Ce-doped V_2O_5/WO_3-TiO_2 showed significantly higher resistance to K deactivation than V_2O_5/WO_3-TiO_2.Ce-doped V_2O_5/WO_3-TiO_2 with K/V = 4(molar ratio) showed 90% NOxconversion at 350°C,whereas in this case V_2O_5/WO_3-TiO_2 showed no activity.The fresh and K-poisoned V_2O_5/WO_3-TiO_2 and Ce-doped V_2O_5/WO_3-TiO_2 catalysts were investigated by means of in situ diffuse reflectance infrared Fourier transform spectroscopy(DRIFTS),NH_3-temperature progress decomposition(NH_3-TPD),X-ray photoelectron spectroscopy(XPS) and H2-temperature program reduction(H_2-TPR).The effect of Ce doping on the improving resistance to K of V_2O_5/WO_3-TiO_2 were discussed.     

利用集合均方根卡尔曼滤波反演重庆地区SO2源排放

传统的"自下而上"清单方法估算的排放清单,其数据的准确性和时效性存在较大局限.基于集合均方根卡尔曼滤波的源清单反演方法,结合WRF-CMAQ（天气研究和预报模式-公共多尺度空气质量模型）被用于对以清华大学编制的2010年MEIC（中国多尺度排放清单模型）排放清单为基础制作的重庆地区SO₂排放源进行反演试验以解决准确性和时效性问题,试验时间段为2014年10月15-31日,重庆主城17个环境空气质量国控监测点ρ（SO₂）小时观测资料用于反演及检验.结果表明:该方法能够反演重庆地区SO₂源排放量,随着反演次数增加,基于反演排放源预报的ρ（SO₂）预报误差持续减小,反演4次后预报误差达到比较低的稳定的水平,其均方根误差均低于20 μg/m3. 5次反演后SO₂源排放量用于2014年10月24-29日每天起始预报,其预报的站点、时间平均的均方根误差从100~400 μg/m3降至30 μg/m3以下.反演中应用局地化尺度减少集合取样误差影响,54与81 km两个局地化尺度反演结果对预报改善效果相当,表明主要影响重庆主城ρ（SO₂）的源排放位于主城及周边地区,也说明内源排放对重庆主城ρ（SO₂）起主要影响.反演后面源排放量主城区降幅约为30 kg/（d·km2）,周边地区减少10~20 kg/（d·km2）,主城区部分SO₂点源排放量降幅约为25 kg/（d·km2）,说明2010年MEIC排放清单高估了试验时段重庆地区的SO₂排放.      

三峡库区EFDC模型集成与应用

为满足三峡库区大尺度的水质预测需求,降低专业水质模型使用门槛,实现模型业务化运行,采用涵盖"模型封装-接口服务-系统集成"全过程的模型封装集成技术方法,开展了EFDC模型集成研究,并在三峡库区水质安全评估与预警系统中进行验证和应用.结果表明:①基于实例化模型建立的模型预置参数库,是模型业务化运行中参数简化的前提,可有效解决模型本地驯化及模型实例的基础数据复用问题;②依据参数识别结果,将模型参数识别为"必调参数、可调参数、默认参数"三类,并采用B/S架构对输入文件、输出文件和主控文件中的不同参数进行分类封装,达到参数简化目的;③采用半紧密型方式建立的基于Web services的EFDC模型集成接口服务及标准,可为信息系统提供通用的EFDC模型计算服务;④该方法在EFDC模型与三峡库区水质安全评估与预警系统集成中得到验证,实现了全库区干流及主要支流COD_Cr、总磷、总氮等污染因子的长时间序列水动力水质预测联机在线运算,满足了用户在水质影响预测预警中低修改量、高运算效率和良好用户体验等需求,实现了模型的业务化运行.