Fish and shrimp waste management at household and market in Bushehr,Iran

Journal of Material Cycles and Waste Management - The aim of this study was to investigate the estimation and management of fish and shrimp wastes in Bushehr province. Two-part questionnaire...     

Sustainable rangeland management using a multi-fuzzy model: how to deal with heterogeneous experts' knowledge

While fuzzy specialists commonly use homogeneous experts' knowledge to construct fuzzy models, it is much more difficult to deal with knowledge elicited from a heterogeneous group of experts. This issue is exemplified in the area of sustainable rangeland management (SRM). One way to deal with the diversity of opinions is to develop a fuzzy system for all experts and to combine all these, the so-called primary systems, into one multi-fuzzy model. To derive each of the primary fuzzy systems, several semi-structured interviews were held in three different areas of the Fars province in Southwest Iran using the knowledge of a group of administrative experts. To obtain the final output of the multi-fuzzy model, we applied different 'voting' methods. The first method simply uses the arithmetic average of the primary outputs as the final output of the multi-fuzzy model. This final output represents an estimation of the right rate of stocking (RRS). We also propose other (un)supervised voting methods. Most importantly, by harmonising the primary outputs such that outliers get less emphasis, we introduce an unsupervised voting method for calculating a weighted estimate of the RRS. This harmonising method is expected to provide a new useful tool for policymakers dealing with heterogenity in experts' opinions: it is especially useful where limited field data are available and one is forced to rely on experts' knowledge only. By constructing the three fuzzy models based on the elicitation of heterogeneous experts' knowledge, our study shows the multidimensional vaguenesses that exist in SRM. Finally, by comparing the final RRS with its common values, this study strongly points to the existence of overgrazing in pastures in the three regions of the Fars province in Southwest Iran.     

A detailed kinetic investigation on the effects of hydrogen enrichment on the performance of gas-fueled SI engine

This study investigates the effects of hydrogen enrichment on formation of pollutants and greenhouse gases in gas-fueled spark ignition engines. To this end, a previously validated detailed mechanism is embedded with a comprehensive one-dimensional engine model and the results are verified with experimental observations at different compression ratios and engine loads. The simulations are then performed for different mixtures of hydrogen and natural gas. The results indicate that adding hydrogen increases the cylinder peak pressure at different loads and compression ratios, despite the fact that reduces the amount of carbon monoxide, carbon dioxide, and methane in all the conditions.     

Kinetic study on photocatalytic degradation of Acid Orange 52 in a baffled reactor using TiO2 nanoparticles

In this study, a baffled photocatalytic reactor was used for the treatment of colored wastewater containing the azo dye of Acid Orange 52(AO52). A study on the active species of the photocatalytic process using TiO_2 nanoparticles indicated that hydroxyl radical and superoxide have the greatest contribution to the dye degradation process respectively.Given that a level of biological oxygen demand/chemical oxygen demand(BOD5/COD) equal to 0.4 was achieved after about 5 hr from the beginning of the experiment, the reactor seems to be capable of purifying the wastewater containing AO52 dye after this time in order to discharge into a biological treatment system to continue the treatment process.The results of the liquid chromatography-mass spectrometry(LC-MS) test showed that during the first 4 hr of the experiment, with the breakdown of the azo bond, the contaminant was decomposed into the benzene annular compounds with less toxicity indicating a reduction in the toxicity of wastewater after removing the dye agent. The study on the kinetics of these reactions followed the pseudo-first-order kinetic model in all conditions and corresponded well to Langmuir–Hinshelwood model. According to the kinetic model for the simultaneous occurrence of possible pathways, the kinetic constant of production and degradation of intermediate products in optimal conditions was estimated to be between 0.0029 and 0.0391 min~(-1).     

Roadmap for recycling of germanium from various resources: reviews on recent developments and feasibility views

Environmental Science and Pollution Research - Germanium as a strategic metalloid is widely used in high-tech devices. The most crucial germanium resources are rare and limited to zinc minerals,...     

Synthesis of magnetic nanoparticles and their effects on growth and physiological parameters of Calotropis procera seedlings

Environmental Science and Pollution Research - The present study was carried out to elucidate effects of synthesized magnetic nanoparticles (MNPs) on morphological and physiological parameters and...     

Tetracycline removal enhancement with Fe-saturated nanoporous montmorillonite in a tripartite adsorption/desorption/photo-Fenton degradation process

The adsorption and photo-Fenton degradation of tetracycline (TC) over Fe-saturated nanoporous montmorillonite was analyzed. The synthesized samples were characterized using XRD, FTIR, SEM, and XRF analysis, and the adsorption and desorption of TC onto these samples, as well as the antimicrobial activity of TC during these processes, were analyzed at different pH. Initially, a set of adsorption/desorption experiments was conducted, and surprisingly, up to 50% of TC adsorbed was released from Mt structure. Moreover, the desorbed TC had strong antibacterial activity. Then, an acid treatment (for the creation of nanoporous layers) and Fe saturation of the montmorillonite were applied to improve its adsorption and photocatalytic degradation properties over TC. Surprisingly, the desorption of TC from modified montmorillonite was still high up to 40% of adsorbed TC. However, simultaneous adsorption and photodegradation of TC were detected and almost no antimicrobial activity was detected after 180 min of visible light irradiation, which could be due to the photo-Fenton degradation of TC on the modified montmorillonite surface. In the porous structures of modified montmorillonite high, ˙OH radicals were created in the photo-Fenton reaction and were measured using the Coumarin technique. The ˙OH radicals help the degradation of TC as proposed in an oxidation process. Surprisingly, more than 90% of antimicrobial activity of the TC decreased under visible light (after 180 min) when desorbed from nanoporous Fe-saturated montmorillonite compared to natural montmorillonite. To the best of our knowledge, this is the first time that such a high TC desorption rate from an adsorbent with the least residual antimicrobial activity is reported which makes nanoporous Fe-saturated montmorillonite a perfect separation substance of TC from the environment.

     

Report: future industrial solid waste management in pars Special Economic Energy Zone (PSEEZ), Iran.

The Pars Special Economic Energy Zone (PSEEZ) is located in the south of Iran, on the northern coastline of the Persian Gulf. This area was established in 1998 for the utilization of south Pars field oil and gas resources. This field is one of the largest gas resources in the world and contains about 6% of the total fossil fuels known. Petrochemical industries, gas refineries and downstream industries are being constructed in this area. At present there are three gas refineries in operation and five more gas refineries are under construction. In this study, different types of solid waste including municipal solid waste (MSW) and industrial wastes were investigated separately. The aim of the study was to focus on the management of the industrial wastes in order to minimize the environmental impact. In the first stage, the types and amounts of industrial waste in PSEEZ were evaluated by an inventory. The main types of industrial waste are oil products (fuel oil, light oil, lubricating oil), spent catalysts, adsorbents, resins, coke, wax and packaging materials. The waste management of PSEEZ is quite complex because of the different types of industry and the diversity of industrial residues. In some cases recycling/reuse of waste is the best option, but treatment and disposal are also necessary tools. Recently a design has been prepared for a disposal site in PSEEZ for the industrial waste that cannot be reused or recycled. The total surface area of this disposal site where the industrial waste should be tipped for the next 20 years was estimated to be about 42 000 m2.     

Environmental assessment of RAMseS multipurpose electric vehicle compared to a conventional combustion engine vehicle

The RAMseS project, financed by the European Commission under the 6th framework Program, has the purpose of developing a solar powered agricultural vehicle in order to replace the conventional vehicles based on internal combustion engines (ICE). In the present study, we report a comparison of life-cycle emission between two systems; a conventional ICE vehicle (ICEV) and the RAMseS electrical vehicle (EV). The study has been conducted by designing a specific model and using the SimaPro software. The results show that the RAMseS system is considerably more environmentally friendly than conventional ICE based system and that, specifically, it can avoid the emission of about 23 ton of CO_2equ per year. Regarding all other pollutants, we found that the RAMseS system is 2.6 times more efficient than the ICEV. The main contribution to emissions of the RAMseS system is due to the batteries which contribute for a 73% of the total. Therefore, further improvement can be obtained with the use of more advanced battery systems, not based on lead.