Soil reinforcement with recycled carpet wastes.

A root or fibre-reinforced soil behaves as a composite material in which fibres of relatively high tensile strength are embedded in a matrix of relatively plastic soil. Shear stresses in the soil mobilize tensile resistance in the fibres, which in turn impart greater strength to the soil. A research project has been undertaken to study the influence of synthetic fibrous materials for improving the strength characteristics of a fine sandy soil. One of the main objectives of the project is to explore the conversion of fibrous carpet waste into a value-added product for soil reinforcement. Drained triaxial tests were conducted on specimens, which were prepared in a cylindrical mould and compacted at their optimum water contents. The main test variables included the aspect ratio and the weight percentage of the fibrous strips. The results clearly show that fibrous inclusions derived from carpet wastes improve the shear strength of silty sands. A model developed to simulate the effect of the fibrous inclusions accurately predicts the influence of strip content, aspect ratio and confining pressure on the shear strength of reinforced sand.     

Kinetic study on photocatalytic degradation of Acid Orange 52 in a baffled reactor using TiO2 nanoparticles

In this study, a baffled photocatalytic reactor was used for the treatment of colored wastewater containing the azo dye of Acid Orange 52(AO52). A study on the active species of the photocatalytic process using TiO_2 nanoparticles indicated that hydroxyl radical and superoxide have the greatest contribution to the dye degradation process respectively.Given that a level of biological oxygen demand/chemical oxygen demand(BOD5/COD) equal to 0.4 was achieved after about 5 hr from the beginning of the experiment, the reactor seems to be capable of purifying the wastewater containing AO52 dye after this time in order to discharge into a biological treatment system to continue the treatment process.The results of the liquid chromatography-mass spectrometry(LC-MS) test showed that during the first 4 hr of the experiment, with the breakdown of the azo bond, the contaminant was decomposed into the benzene annular compounds with less toxicity indicating a reduction in the toxicity of wastewater after removing the dye agent. The study on the kinetics of these reactions followed the pseudo-first-order kinetic model in all conditions and corresponded well to Langmuir–Hinshelwood model. According to the kinetic model for the simultaneous occurrence of possible pathways, the kinetic constant of production and degradation of intermediate products in optimal conditions was estimated to be between 0.0029 and 0.0391 min~(-1).     

Sequentially coupled flow-geomechanical modeling of underground coal gasification for a three-dimensional problem

Underground coal gasification (UCG) has been identified as an environmentally friendly technique for gasification of deep un-mineable coal seams in situ. This technology has the potential to be a clean and promising energy provider from coal seams with minimal greenhouse gas emission. The UCG eliminates the presence of coal miners underground hence, it is believed to be a much safer technique compared to the deep coal mining method. The UCG includes drilling injection and production wells into the coal seam, igniting coal, and injecting oxygen-based mix to facilitate coal gasification. Produced syngas is extracted from the production well. Evolution of a cavity created from the gasification process along with high temperature as well as change in pore fluid pressure causes mechanical changes to the coal and surrounding formations. Therefore, simulation of the gasification process alone is not sufficient to represent this complex thermal-hydro-chemical–mechanical process. Instead, a coupled flow and geomechanical modeling can help better represent the process by allowing simultaneous observation of the syngas production, advancement of the gasification chamber, and the cavity growth. Adaptation of such a coupled simulation would aid in optimization of the UCG process while helping controlling and mitigating the environmental risks caused by geomechanical failure and syngas loss to the groundwater. This paper presents results of a sequentially coupled flow-geomechanical simulation of a three-dimensional (3D) UCG example using the numerical methodology devised in this study. The 3D model includes caprock on top, coal seam in the middle, and another layer of rock underneath. Gasification modeling was conducted in the Computer Modelling Group Ltd. (CMG)’s Steam, Thermal, and Advanced processes Reservoir Simulator (STARS). Temperature and fluid pressure of each grid block as well as the cavity geometry, at the timestep level, were passed from the STARS to the geomechanical simulator i.e. the Fast Lagrangian Analysis of Continua in 3 Dimensions (FLAC3D) computer program (from the Itasca Consulting Group Inc.). Key features of the UCG process which were investigated herein include syngas flow rate, cavity growth, temperature and pressure profiles, porosity and permeability changes, and stress and deformation in coal and rock layers. It was observed that the coal matrix deformed towards the cavity, displacement and additional stress happened, and some blocks in the coal and rock layers mechanically failed.     

Silica-supported antimony(III) chloride as a mild and reusable catalyst for the Paal–Knorr pyrrole synthesis

Heterogeneous catalysts are used for control of environmental pollution. Heterogeneous catalysts are easily separated from the reaction mixture, thus allowing their recovery and re-use. There is a need for catalysts that are efficient under mild conditions. Here, we show that silica-supported antimony(III) chloride (SbCl₃/SiO₂) acts as a highly efficient heterogeneous Lewis acid catalyst for the Paal–Knorr pyrrole synthesis at room temperature. We found that condensation of hexane-2,5-dione with aromatic and aliphatic primary amines in hexane using SbCl₃/SiO₂ with 7.6 wt% SbCl₃ was the best reaction condition. The silica support facilitated the workup of the reaction mixture and provided a reusable catalyst at least for 7 runs without significant loss in activity. Indeed, the yield was 98% for the first run and 84% for the 7th run. We conclude that low catalyst loading, operational simplicity, practicability and applicability to various substrates make this reaction an interesting alternative to previously applied procedures. From the environmental standpoint, this eco-friendly catalyst is stable, highly active, easy to prepare and handle.     

Vitamin B1 as a metal-free organocatalyst for greener Paal–Knorr pyrrole synthesis

This investigation discloses a greener reaction to prepare pyrrole derivatives. Metal-free catalysts are greener alternatives to existing metal catalysts in synthetic organic chemistry. Indeed, transition metals are often costly and toxic. They may be found as traces in health reaction products such as pharmaceuticals. Alternatively small organic molecules termed “organocatalysts” allow the synthesis of valuable products without traces of toxic metals. Here, we show for the first time the use of vitamin B₁ as new organocatalyst for the Paal–Knorr pyrrole synthesis under ambient conditions. Reaction conditions were optimized for the reaction of hexane-2,5-dione with 4-methoxyaniline. Ethanol was the most effective solvent. The conversion was quantitative using vitamin B₁, by comparison with a low yield of 30?% without catalysis. The best conditions were performed in ethanol with 5?mol % of vitamin B₁ during 1?h. This reaction was tested using various aromatic amines. To conclude the use of vitamin B₁ for the Paal–Knorr pyrrole, cyclocondensation has mild reaction conditions, is simple to perform, and gives moderate to excellent yields. It is therefore a promising reaction for the preparation of various pyrrole derivatives.     

Synthesis and antibacterial activity of a Fe3O4–AgCl nanocomposite against Escherichia coli

In this investigation, Fe₃O₄ magnetic nanoparticles (MNPs) were prepared by the alkalinization of an aqueous medium containing ferrous sulfate and ferric chloride. In the next step, a Fe₃O₄–AgCl magnetic nanocomposite was fabricated by the drop-by-drop addition of silver nitrate solution into a NaCl solution containing Fe₃O₄ MNPs. All prepared nanoparticles were characterized by transition electron microscopy (TEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDS). Both particle types varied in size from 2.5 to 20?nm, with an average size of 7.5?nm for Fe₃O₄ MNPs and 12.5?nm for Fe₃O₄–AgCl nanocomposites. The antibacterial effect of the Fe₃O₄ MNPs and fabricated Fe₃O₄–AgCl nanocomposites against Escherichia coli (ATCC 35218) were investigated by conventional serial agar dilution method using the Müller–Hinton Agar medium. The minimum inhibitory concentration was 4?mg?mL^?1 for Fe₃O₄ MNPs and 2?mg?mL^?1 for the Fe₃O₄–AgCl magnetic nanocomposites. Time-kill course assays showed that the Fe₃O₄–AgCl magnetic nanocomposites successfully killed all inoculated bacterial cells during an exposure time of 60?min. The antibacterial activity of recycled Fe₃O₄–AgCl magnetic nanocomposites over four 60?min cycles of antibacterial treatment was further tested against E. coli by the colony-forming unit (CFU) method. The antibacterial efficiency of the nanocomposites was constant over two cycles of antibacterial testing.     

Bioremediation of toxic metals mercury and cesium using three types of biosorbent: bacterial exopolymer,gall nut,and oak fruit particles

Cesium and mercury are two mono-valent elements which can be found in toxic industrial, medical, and nuclear wastes. Their presence in the environment has deleterious effects on the ecosystem, living organisms including humans. Due to the chemical nature of these metals, bioremediation by conventional methods is more difficult to achieve compared to other metals. In this study, we used three biosorbents (oak powder, gall nut, and bacterial exopolymer) for the bioremediation of Hg and Cs. Bio-polymer was produced in the GMS mineral broth. Synthetic wastes of Hg(NO₃)₂ and isotope Cs-133 as the single-metal solutions were used. The biorefining process was carried out in glass columns, made of Pyrex, with dimensions 20?×?7/2?cm² with a V-shaped bottom. The samples were analyzed using atomic absorption. The experimental results showed that eliminated metal percent by oak powder, gall nut, and bacterial exopolymer were, respectively, of 94.8%, 96%, and 13.8% for Hg and 7.8%, 4.4%, and 69.4% for Cs. The tests revealed that Ca⁺⁺, when used as flocculant, played a key role in both biosorption and bio-precipitation rates. Consequently, it was concluded that the investigated biosorbents could be use as an integrated biosorption system for the refinement of mixed wastes.     

Bioaccumulation of heavy metals in fish species of Iran: a review

Environmental Geochemistry and Health - Accumulation of heavy metals (HMs) in fish tissues is an important factor in monitoring the health and safety of aquatic ecosystems. Furthermore, fish are...     

Seasonal variations of polycyclic aromatic hydrocarbons in coastal sediments of a marine resource hot spot: the case of pars special economic energy zone,Iran

Environmental Geochemistry and Health - Polycyclic aromatic hydrocarbons (PAHs) are an important group of compounds of major environmental concern, which are in the class of persistent organic...