Advanced superhydrophobic electroactive fluorinated polyimide and its application in anticorrosion coating

A novel superhydrophobicelectroactive fluorinated polyimide (HEFPI) was first synthesized from aniline trimer and 4,4′-(Hexafluoroisopropylidene) diphthalic anhydride. The HEFPI could be fabricated as superhydrophobicfilm by replicated the surface of the Xanthosomasagittifolium leaves. The water contact angle of HEFPI film reaches as high as 157 ° and the superhydrophobic property of HEFPI could coat on cold-rolled steel (CRS) to prevent the metal corrosion. Electroactivity of EFPI was evaluated by performing electrochemical cyclic voltammetry study. Besides, redox catalytic capabilities of aniline trimer units existed in HEFPI main chain may induce the formation of passive metal oxide layers on the CRS electrode. The synergistic effects (hydrophobic property and passive metal oxide layers) make the HEFPI coating has great potential for advanced anticorrosion material.     

Human PCDD/PCDF levels near a pentachlorophenol contamination site in Tainan, Taiwan

A pentachlorophenol (PCP) manufacturing plant in southern Taiwan discontinued production in 1989. The site of the abandoned plant was heavily contaminated by PCDD/PCDFs, impurities formed in the PCP production process. Serum samples collected from 27 residents living near the deserted plant were evaluated to determine whether this contamination had associated serum levels of PCDD/PCDFs in local residents. The average level of 17 tested congeners ranged from 556 to 5240 pg/g lipid (mean, 1670 pg/g lipid). The corresponding 2,3,7,8-TCDD toxicity equivalent quotient values calculated by international toxicity equivalent factors (I-TEFs) and those recommended by WHO (WHO-TEFs) were 47.2 pg I-TEQ/g lipid and 53.4 pg WHO-TEQ/g lipid, respectively. Levels in other parts of Taiwan typically range from 15 to 20 pg WHO-TEQ/g lipid; therefore, it is likely that the heavily contaminated plant site caused these unusually high serum levels. The average PCDD/PCDF levels of 29 fish-tissue and nine soil samples collected from the sea reservoir surrounding the abandoned PCP plant were also abnormally high: 8630 pg/g lipid (985 pg WHO-TEQ/g lipid) and 606000 pg/g-sample (922 pg WHO-TEQ/g-sample), respectively. Factor analysis indicated that the congener pattern of human serum samples collected from residents living near the abandoned PCP plant different from samples collected from other areas in Taiwan without known PCDD/PCDF pollution. Similar results were observed for the fish tissue and soil samples. The current study may have discovered a "hot spot" for elevated dioxin human exposure in Taiwan. The preliminary finding has raised a public health concern in the inspected area and requires further investigations to clarify the nature of the contamination and potential impact on the local environment and human health.     

Prenatal sonographic appearance of Beare-Stevenson cutis gyrata syndrome: two- and three-dimensional ultrasonographic findings

Beare-Stevenson cutis gyrata syndrome is characterized by craniofacial anomalies, particularly craniosynostosis, ear defects, cutis gyrata, acanthosis nigricans, anogenit anomalies, skin tags, and prominent umbilical stump. The prenatal two- and three-dimensional ultrasonographic findings of this rare condition is reported. The detection was made at 32 weeks of gestation in a woman with polyhydramnios and fetal head anomaly. The ultrasound appearance and postnatal follow‒up are presented. Copyright © 2001 John Wiley & Sons, Ltd.     

Evaluation and selection of regeneration of waste lubricating oil technology

Lubricant is one of the important resources that cannot be disposed of randomly due to the presence of pollutants. In response to economic efficiency and environmental protection, there is a growing trend of regeneration and reuse of waste lubricant. However, the technologies shall be compared to provide a useful reference for the use of waste lubricant. The major aim of this paper is to use analytic hierarchy process to select, analyze, and compare the regenerative technologies, thus laying a basis for the governmental bodies in policy making of lubricant recovery as well as for industrial operators in deciding the recovery methods.     

Impact of selected solution factors on arsenate and arsenite removal by nanoiron particles

Introduction  

The nano-scale zero-valent iron (NZVI) was used for the removal of arsenite (As(III)) and arsenate (As(V)) in aqueous solution. Batch experiments were conducted to investigate the effects of initial pH, initial arsenic concentration, dissolved oxygen (DO), and ratio of As(III)/As(V) on arsenic removal.     

Differential Legionella spp. survival between intracellular and extracellular forms in thermal spring environments

Legionella are commonly found in natural and man-made aquatic environments and are able to inhabit various species of protozoa. The relationship between the occurrence of Legionella spp. within protozoa and human legionellosis has been demonstrated; however, the proportions of intracellular and extracellular Legionella spp. in the aquatic environment were rarely reported. In this study, we developed a new method to differentiate intracellular and extracellular Legionella spp. in the aquatic environment. Water samples from three thermal spring recreational areas in southeastern Taiwan were collected and analyzed. For each water sample, concurrent measurements were performed for Legionella spp. and their free-living amoebae hosts. The overall detection rate was 32 % (16/50) for intracellular Legionella spp. and 12 % (6/50) for extracellular Legionella spp. The most prevalent host of Legionella spp. was Hartmannella vermiformis. The identified Legionella spp. differed substantially between intracellular and extracellular forms. The results showed that it may be necessary to differentiate intracellular and extracellular forms of Legionella spp.     

Collocated comparisons of continuous and filter-based PM2.5 measurements at Fort McMurray,Alberta, Canada

Collocated comparisons for three PM_2.5 monitors were conducted from June 2011 to May 2013 at an air monitoring station in the residential area of Fort McMurray, Alberta, Canada, a city located in the Athabasca Oil Sands Region. Extremely cold winters (down to approximately ?40°C) coupled with low PM_2.5 concentrations present a challenge for continuous measurements. Both the tapered element oscillating microbalance (TEOM), operated at 40°C (i.e., TEOM₄₀), and Synchronized Hybrid Ambient Real-time Particulate (SHARP, a Federal Equivalent Method [FEM]), were compared with a Partisol PM_2.5 U.S. Federal Reference Method (FRM) sampler. While hourly TEOM₄₀ PM_2.5 were consistently ~20–50% lower than that of SHARP, no statistically significant differences were found between the 24-hr averages for FRM and SHARP. Orthogonal regression (OR) equations derived from FRM and TEOM₄₀ were used to adjust the TEOM₄₀ (i.e., TEOM_adj) and improve its agreement with FRM, particularly for the cold season. The 12-year-long hourly TEOM_adj measurements from 1999 to 2011 based on the OR equations between SHARP and TEOM₄₀ were derived from the 2-year (2011–2013) collocated measurements. The trend analysis combining both TEOM_adj and SHARP measurements showed a statistically significant decrease in PM_2.5 concentrations with a seasonal slope of ?0.15 μg m^?3 yr^?1 from 1999 to 2014.Implications: Consistency in PM_2.5 measurements are needed for trend analysis. Collocated comparison among the three PM_2.5 monitors demonstrated the difference between FRM and TEOM, as well as between SHARP and TEOM. The orthogonal regressions equations can be applied to correct historical TEOM data to examine long-term trends within the network.     

Cooling of multichip light emitting diode with ultra-high power—An application of bypass cooling from an air-conditioning system

This study focuses on the use of indium gallium nitride multichip for ultra-high power light emitting diode (LED) heat transfer and thermal cooling analysis. This research approach is based on the multichip LED experimental study of aluminum extrusion heat sink and air-conditioning system-forced cooling approach. An investigation of heat transfer characteristics of the phenomenon of variation is conducted to improve performance and develop an LED system that can become a reference guideline for thermal design and assembly. This study’s package structure can use silicon substrate material and fill copper material to increase thermal conduction. An air-conditioning system bypass cooling approach is also used. This study aims to help to increase LED thermal cooling, long life, reliability, and reduce the optic lumen decay phenomenon in the future. Results are based on different power ratings that can be used to redefine LED classifications.     

Stream discharge characteristics through urbanization gradient in Danshui River, Taiwan: perspectives from observation and simulation

Urbanization and the subsequent changes in land use/cover inevitably influence the quality and even the quantity of stream water. This issue is widely studied through evaluations on land-use change scenarios or comparisons among historical patterns at the same watershed. However, observational stream discharge changes through urbanization gradient have rarely been discussed. In this study, we analyzed 5-year discharge data from 13 gauges in the Danshui River network with a wide range of urbanization gradient to explore the impacts on observational hydrological characteristics in individual catchments. The results reveal that stream discharge in pristine watersheds is characterized by a larger proportion of baseflow and is less fluctuating. When the forest coverage is <90%, the discharge fluctuation almost doubles. Meanwhile, the baseflow fraction decreases gradually with the increase of paddy area, which may concomitantly result from the increasing irrigation. Such a drop in baseflow may threaten the maintenance of the minimum flow required for the stream aquatic ecosystem. Furthermore, we simulated the stream discharges by TOPMODEL with blind land-use-independent parameters. The results show that the simulated discharges are satisfactory, particularly for the pristine catchments, but not as fitting for the paddy-intensive watersheds perhaps due to the unexpected irrigation. On the whole, the calibrated parameters are dependent with the landscape characteristics. The landscape-based parameter estimations can be applied to simulate discharge well, meaning the potential to assess the ungauged watersheds.