Scenario-based assessment and multi-objective optimization of urban development plan with carrying capacity of water system

• Impact of urban development on water system is assessed with carrying capacity. • Impacts on both water resource quantity and environmental quality are involved. • Multi-objective optimization revealing system trade-off facilitate the regulation. • Efficiency, scale and structure of urban development are regulated in two stages. • A roadmap approaching more sustainable development is provided for the case city. Environmental impact assessments and subsequent regulation measures of urban development plans are critical to human progress toward sustainability, since these plans set the scale and structure targets of future socioeconomic development. A three-step methodology for assessing and optimizing an urban development plan focusing on its impacts on the water system was developed. The methodology first predicted the pressure on the water system caused by implementation of the plan under distinct scenarios, then compared the pressure with the carrying capacity threshold to verify the system status; finally, a multi-objective optimization method was used to propose regulation solutions. The methodology enabled evaluation of the water system carrying state, taking socioeconomic development uncertainties into account, and multiple sets of improvement measures under different decisionmaker preferences were generated. The methodology was applied in the case of Zhoushan city in South-east China. The assessment results showed that overloading problems occurred in 11 out of the 13 zones in Zhoushan, with the potential pressure varying from 1.1 to 18.3 times the carrying capacity. As a basic regulation measure, an environmental efficiency upgrade could relieve the overloading in 4 zones and reduce 9%‒63% of the pressure. The optimization of industrial development showed that the pressure could be controlled under the carrying capacity threshold if the planned scale was reduced by 24% and the industrial structure was transformed. Various regulation schemes including a more suitable scale and structure with necessary efficiency standards are provided for decisionmakers that can help the case city approach a more sustainable development pattern.     

Biological conversion pathways of sulfate reduction ammonium oxidation in anammox consortia

• The SRAO phenomena tended to occur only under certain conditions. • High amount of biomass and non-anaerobic condition is requirement for SRAO. • Anammox bacteria cannot oxidize ammonium with sulfate as electron acceptor. • AOB and AnAOB are mainly responsible for ammonium conversion. • Heterotrophic sulfate reduction mainly contributed to sulfate conversion. For over two decades, sulfate reduction with ammonium oxidation (SRAO) had been reported from laboratory experiments. SRAO was considered an autotrophic process mediated by anammox bacteria, in which ammonium as electron donor was oxidized by the electron acceptor sulfate. This process had been attributed to observed transformations of nitrogenous and sulfurous compounds in natural environments. Results obtained differed largely for the conversion mole ratios (ammonium/sulfate), and even the intermediate and final products of sulfate reduction. Thus, the hypothesis of biological conversion pathways of ammonium and sulfate in anammox consortia is implausible. In this study, continuous reactor experiments (with working volume of 3.8L) and batch tests were conducted under normal anaerobic (0.2≤DO<0.5 mg/L) / strict anaerobic (DO<0.2 mg/L) conditions with different biomass proportions to verify the SRAO phenomena and identify possible pathways behind substrate conversion. Key findings were that SRAO occurred only in cases of high amounts of inoculant biomass under normal anaerobic condition, while absent under strict anaerobic conditions for same anammox consortia. Mass balance and stoichiometry were checked based on experimental results and the thermodynamics proposed by previous studies were critically discussed. Thus anammox bacteria do not possess the ability to oxidize ammonium with sulfate as electron acceptor and the assumed SRAO could, in fact, be a combination of aerobic ammonium oxidation, anammox and heterotrophic sulfate reduction processes.     

Degradation of polyacrylamide (PAM) and methane production by mesophilic and thermophilic anaerobic digestion: Effect of temperature and concentration

• PAM degradation in thermophilic AD in comparison with mesophilic AD. • PAM degradation and its impact on thermophilic and mesophilic AD. • Enhanced methane yield in presence of PAM during thermophilic and mesophilic AD. • PAM degradation and microbial community analysis in thermophilic and mesophilic AD. Polyacrylamide (PAM) is generally employed in wastewater treatment processes such as sludge dewatering and therefore exists in the sludge. Furthermore, it degrades slowly and can deteriorate methane yield during anaerobic digestion (AD). The impact or fate of PAM in AD under thermophilic conditions is still unclear. This study mainly focuses on PAM degradation and enhanced methane production from PAM-added sludge during 15 days of thermophilic (55°C) AD compared to mesophilic (35°C) AD. Sludge and PAM dose from 10 to 50 g/kg TSS were used. The results showed that PAM degraded by 76% to 78% with acrylamide (AM) content of 0.2 to 3.3 mg/L in thermophilic AD. However, it degraded only 27% to 30% with AM content of 0.5 to 7.2 mg/L in mesophilic AD. The methane yield was almost 230 to 238.4 mL/g VSS on the 8th day in thermophilic AD but was 115.2 to 128.6 mL/g VSS in mesophilic AD. Mechanism investigation revealed that thermophilic AD with continuous stirring not only enhanced PAM degradation but also boosted the organics release from the sludge with added PAM and gave higher methane yield than mesophilic AD.     

Compression behaviors of mechanically biologically treated wastes of Tianziling landfill in Hangzhou,China

Environmental Science and Pollution Research - This study aimed to investigate the compression behaviors of mechanically biologically treated (MBT) wastes. For this purpose, the short-term...     

Functional wastepaper-montmorillonite composite aerogel for Cd2+ adsorption

Environmental Science and Pollution Research - In this study, a composite aerogel (WP-MMT) composed of wastepaper (WP) and montmorillonite (MMT) was prepared by ambient pressure drying technology...     

Effects of reciprocal hybridization on cadmium accumulation in F1 hybrids of two Solanum photeinocarpum ecotypes

In this study, farmland and mining ecotypes of Solanum photeinocarpum (a potential cadmium (Cd) hyperaccumulator plant) were reciprocally hybridized each other, and the Cd accumulation characteristics of the F1 hybrids were studied. In pot experiments, higher biomasses and Cd extraction abilities were found for two S. photeinocarpum F1 hybrids than for the parents, but the Cd contents in various organs were lower in the hybrids than the parents. However, the differences between the Cd contents in the two hybrids were not significant. The antioxidant enzyme (superoxide dismutase and peroxidase) activities were higher for the S. photeinocarpum F1 hybrids than the parents. Less DNA methylation was found in the hybrids than the parents because more demethylation occurred in the hybrids than the parents. The biomass, Cd content, and Cd extraction ability effects in field experiments were similar to the effects in the pot experiments. It was concluded that reciprocally hybridizing different S. photeinocarpum ecotypes improved the ability of S. photeinocarpum to be used to phytoremediate contaminated land.

     

气田甲醇污水处理装置的运行优化

针对延长气田采气一厂甲醇污水处理站运行中换热器/精馏塔塔板结垢严重、甲醇回收率低、处理后水水质不达标等问题,采用水质分析、结垢分析与工艺原因分析等方法,分析原因并采取相应措施。结果表明:预处理效果差、精馏塔分离效果差是造成这些问题的主要原因;采用优化预处理药剂加量、优化加药工艺和优化甲醇回收工艺等措施,使甲醇污水处理装置持续稳定运行,提高了甲醇污水预处理效果,降低了换热器/精馏塔塔板结垢程度,提高了甲醇回收率。处理后水水质稳定,含油量、悬浮固体含量、悬浮物粒径中值均达标,可满足平均空气渗透率≤0.01μm~2地层的回注要求。     

动态校准仪臭氧间接传递技术

对5台主流动态校准仪开展臭氧间接传递技术研究,对动态校准仪的准确性、可靠性、稳定性及臭氧传递的线性方程等性能参数进行了实验室考察。总体而言,发生型动态校准仪和分析型动态校准仪均可用于臭氧传递工作中。分析型动态校准仪可直接进行臭氧传递,发生型动态校准仪在臭氧传递前必须进行预校准。建议至少每3个月对发生型动态校准仪进行1次臭氧传递,每6个月对分析型动态校准仪进行1次臭氧传递。     

4种典型纳米材料对小鼠胚胎成纤维细胞毒性的初步研究

为探讨不同种类纳米材料对原代培养小鼠胚胎成纤维细胞(Mouse embryo fibroblasts,MEF)的毒性效应及作用机制,选择4种典型的纳米材料(纳米碳、单壁碳纳米管、纳米氧化锌、纳米二氧化硅)制备颗粒悬液,设立5个剂量组(5、10、20、50、100μg·mL-1)对BALB/c小鼠MEF细胞进行24、48、72h染毒培养,利用细胞形态学观察和噻唑蓝实验(MTT比色法)检测上述4种纳米材料对MEF细胞活性的影响,同时,测定染毒24h后细胞培养液上清中乳酸脱氢酶(LDH)活性以探讨纳米颗粒对细胞膜完整性的影响.结果显示:1)4种纳米材料均能明显影响MEF细胞的生长形态.染毒24h后,MEF细胞发生不同程度的回缩变形,细胞间隙增大,排列稀疏,胞内颗粒物增多,细胞透明度下降.2)纳米碳、纳米氧化锌、纳米二氧化硅对MEF细胞增殖的抑制作用和对细胞膜完整性的损伤作用均随染毒剂量的升高而增强,具有明显的剂量-效应关系,其半数致死浓度(24h-IC50)分别为21.85、21.94、461.10μg·mL-1;碳纳米管组的剂量-效应之间不呈对数线性关系,未能得出其24h-IC50.3)在不同染毒剂量水平上,4种纳米材料的毒性对比差异显著:低剂量水平上纳米碳与碳纳米管的毒性强于纳米氧化锌和纳米二氧化硅,随着剂量的升高纳米氧化锌的细胞毒性升高最为显著.结果提示,纳米材料能够对MEF细胞造成毒性损伤,破坏细胞膜的完整性可能只是作用途径之一;纳米材料的毒性可能受粒径、形状、化学组成等许多因素的影响.     

Experimental research on emission and removal of dioxins in flue gas from a co-combustion of MSW and coal incinerator

This paper describes the experimental study of dioxins removal from flue gas from a co-combustion municipal solid waste and coal incinerator by means of a fluidized absorption tower and a fabric filter. A test rig has been set up. The flow rate of flue gas of the test rig is 150-2000 m3/h. The system was composed of a humidification and cooling system, an absorption tower, a demister, a slurry make-up tank, a desilter, a fabric filter and a measurement system. The total height of the absorption tower was 6.5m, and the diameter of the reactor pool was 1.2 m. When the absorbent was 1% limestone slurry, the recirculation ratio was 3, the jet rate was 5-15 m/s and the submerged depth of the bubbling pipe under the slurry was 0.14 m, the removal efficiency for dioxins was 99.35%. The concentration of dioxins in the treated flue gas was 0.1573 x 10(-13)kg/Nm3 and the concentration of oxygen was 11%. This concentration is comparable to the emission standards of other developed countries.