An analysis of variables influencing the material composition of automobiles

The use of materials is studied broadly, because of the environmental problems related to extraction, production, consumption and waste treatment. The use and substitution of materials in products is therefore a relevant issue for environmental policy making. Studies have been done to describe the material flow or to measure the impact of materials or products on the environment. However, these studies do not often consider economic, substitution and dynamic aspects of material flows. Other studies on material flows analyse the relationship between the use of materials and economic growth, but they do not consider substitution between materials. For environmental policy making economic, technological and environmental aspects of the use of materials need to be considered. Especially, substitution of materials is important. In various countries material and product policies are imposed on a variety of materials and products. For evaluation of these policies their environmental and economic effects need to be examined in detail. This study aims to analyse the economic and technological factors influencing the use of materials and the substitution between different materials dynamically. The goal is to obtain an insight in the effect that material levies may have on the use and substitution of materials. The statistical analysis is performed on a specific product-group because decisions on the use of materials are taken on a product-level. The case study is performed on automobiles. The results show that the material use is largely an autonomous development. The price of aluminium has a positive, significant effect on the use of that material. The price of plastics has a positive, but not significant effect on the use of plastics. Reasons may be that the costs of a raw material are small relative to the processing costs, and that the production process can only be changed slowly. Other factors, like competitiveness and consumers' tastes, may be more important for substitution. This implies that levies or subsidies on certain materials is not a promising policy to change the use of materials. Besides time, there are two other factors that have a positive and significant relationship with the use of aluminium and plastics: the fuel efficiency, which is the distance driven divided by the energy used; and, the road tax, which depends on the weight of a car. However, these effects are caused by their positive relationship with time. The main conclusion of the case study is that imposing a levy on materials may not have the desired or expected effect of reduction in material use.     

Perfluoroalkyl substances (PFASs) in food and water from Faroe Islands

Diet and drinking water are suggested to be major exposure pathways for perfluoroalkyl substances (PFASs). In this study, food items and water from Faroe Islands sampled in 2011/2012 were analyzed for 11 perfluoroalkyl carboxylic acids (PFCAs) and 4 perfluoroalkane sulfonic acids (PFSAs). The food samples included milk, yoghurt, crème fraiche, potatoes, fish, and fish feed, and the water samples included surface water and purified drinking water. In total, nine PFCAs and four PFSAs were detected. Generally, the levels of PFAS were in the lower picogram per gram range. Perfluorobutanoic acid was a major contributor to the total PFASs concentration in water samples and had a mean concentration of 750 pg/L. Perfluoroundecanoic acid (PFUnDA) was predominating in milk and wild fish with mean concentrations of 170 pg/g. Perfluorooctane sulfonic acid (PFOS) was most frequently detected in food items followed by PFUnDA, perfluorononanoic acid, and perfluorooctanoic acid (PFOA). Levels of PFUnDA and PFOA exceeded those of PFOS in milk and fish samples. Prevalence of long-chain PFCAs in Faroese food items and water is confirming earlier observations of their increase in Arctic biota. Predominance of short-chain and long-chain homologues indicates exposure from PFOS and PFOA replacement compounds.     

Effect of transpiration on Pb uptake by lettuce and on water soluble low molecular weight organic acids in rhizosphere

The effect of transpiration (high and low) on Pb uptake by leaf lettuce and on water soluble low molecular weight organic acids (LMWOAs) in rhizosphere has been studied. After two weeks of growth the plants were cultured in greenhouse for more four weeks and two days. Pb(NO(3))(2) solutions of different concentrations (100, 200, and 300 mg l(-1) of Pb) were then added to the quartz sand pots of different plants and studies were initiated. Blank experiments (without treating the quartz sand pots with Pb(NO(3))(2) solutions) were also run in parallel. No significant differences in the growth of the plants with the concentrations of added Pb(NO(3))(2) solutions were observed by both low and high transpirations at the end of the 0, 3rd, and 10th days of studies. The total evaporation of the volatiles during 10 days did not depend on the concentration of Pb(2+) but with high transpiration the rate of evaporation was significantly higher than with low transpiration. Uptake of Pb by shoots and roots of the plants was found to be proportional to the concentration of various Pb(NO(3))(2) solutions added and more accumulation was observed in roots than in shoots at the end of 3rd and 10th days. High transpiration created more Pb uptake than low transpiration did. One volatile acid, propionic acid and nine non-volatile acids, lactic, glycolic, oxalic, succinic, fumaric, oxalacetic, D-tartaric, trans-aconitic, and citric acids in rhizosphere quartz sands were identified and quantified by gas chromatography (GC) analysis. D-Tartaric and citric acids were major among the non-volatile acids. The amount of LMWOAs in rhizosphere quartz sands increased with the higher amount of Pb uptake and also with the duration of studies. The total quantities of the LMWOAs in the rhizosphere quartz sands were significantly higher under high transpiration with 300 mg l(-1) Pb solution addition at the end of 10th day. The present study shows prominent correlation between transpiration and uptake of heavy metal and interesting correlation between Pb contaminated level and quantity of water soluble LMWOAs in rhizosphere quartz sands. The latter thus deserves of further studies.     

The adsorptive capacity of vapor-phase mercury chloride onto powdered activated carbon derived from waste tires

Injection of powdered activated carbon (PAC) upstream of particulate removal devices (such as electrostatic precipitator and baghouses) has been used effectively to remove hazardous air pollutants, particularly mercury-containing pollutants, emitted from combustors and incinerators. Compared with commercial PACs (CPACs), an alternative PAC derived from waste tires (WPAC) was prepared for this study. The equilibrium adsorptive capacity of mercury chloride (HgCl2) vapor onto the WPAC was further evaluated with a self-designed bench-scale adsorption column system. The adsorption temperatures investigated in the adsorption column were controlled at 25 and 150 degrees C. The superficial velocity and residence time of the flow were 0.01 m/sec and 4 sec, respectively. The adsorption column tests were run under nitrogen gas flow. Experimental results showed that WPAC with higher Brunauer-Emmett-Teller (BET) surface area could adsorb more HgCl2 at room temperature. The equilibrium adsorptive capacity of HgCl2 for WPAC measured in this study was 1.49 x 10(-1) mg HgCl2/g PAC at 25 degrees C with an initial HgCI2 concentration of 25 microg/m3. With the increase of adsorption temperature < or = 150 degrees C, the equilibrium adsorptive capacity of HgCl2 for WPAC was decreased to 1.34 x 10(-1) mg HgCl2/g PAC. Furthermore, WPAC with higher sulfur contents could adsorb even more HgCl2 because of the reactions between sulfur and Hg2+ at 150 degrees C. It was demonstrated that the mechanisms for adsorbing HgCl2 onto WPAC were physical adsorption and chemisorption at 25 and 150 degrees C, respectively. Experimental results also indicated that the apparent overall driving force model appeared to have the good correlation with correlation coefficients (r) > 0.998 for HgCl2 adsorption at 25 and 150 degrees C. Moreover, the equilibrium adsorptive capacity of HgCl2 for virgin WPAC was similar to that for CPAC at 25 degrees C, whereas it was slightly higher for sulfurized WPAC than for CPAC at 150 degrees C.     

Atmospheric lead concentration distribution in Northern Taiwan

Atmospheric lead concentrations were measured randomly, approximately once per week, at five traffic sites in northern Taiwan from September 1994 to May 1995. Three types of theoretical distributions, lognormal, Weibull and gamma were selected to fit the frequency distribution of the measured lead concentration. Four goodness-of-fit criteria were used to judge which theoretical distribution is the most appropriate to represent the frequency distributions of atmospheric lead.The results show that atmospheric lead concentrations in total suspended particulates fit the lognormal distribution reasonably well in northern Taiwan. The intervals of fitted theoretical cumulative frequency distributions (CFDs) can successfully contain the measured data when the population mean is estimated with a 95% confidence interval. In addition, atmospheric lead concentration exceeding a critical concentration is also predicted from the fitted theoretical CFDs.     

Development of nutrient cycle through agricultural activities of a rural area in the North of Vietnam

Material flow analysis (MFA) has been applied to assess the environmental impact of human activities on nutrient flows at the commune scale. This paper reports the assessment of human excreta and animal manure as a nutrient source for paddy fields and fishponds in Hoang Tay commune, Ha Nam province, Vietnam. The quality of MFA model was confirmed through modified uncertainty analysis, then was used to originally quantify and visualize the interlinks of livestock with the environmental sanitation and agricultural system in terms of nutrients. Currently, half of the pig manure was collected to the biogas, and the remainders were freely discharged to the commune’s drainage system (25%) or directly reused in the paddy fields (25%). While wastewater in the drainage system was the biggest source of nitrogen (contributed 46%), paddy field was the biggest source of phosphorous (contributed 55%) discharged to the Nhue River, totaling 57 ± 9 ton N and 29 ± 6 ton P, annually. Consequently, mitigation measures for nutrient resource management were proposed, and reducing half of chemical fertilizers applied and reusing all excreta and manure in the paddy fields were the most effective option.     

Comparison of the physical and chemical characteristics of fine road dust at different urban sites

The size distribution and chemical components of a fine fraction (<2.5 μm) of road dust collected at urban sites in Korea (Gwangju) and Mongolia (Ulaanbaatar) where distinct urban characteristics exist were measured. A clear bimodal size distribution was observed for the resuspended fine road dust at the urban sites in Korea. The first mode peaked at 100–110 nm, and the second peak was observed at 435–570 nm. Ultrafine mode (~30 nm) was found for the fine road dust at the Mongolia site, which was significantly affected by residential coal/biomass burning. The contribution of the water-soluble ions to the fine road dust was higher at the sites in Mongolia (15.8–16.8%) than at those in Korea (1.2–4.8%). Sulfate and chloride were the most dominant ionic species for the fine road dust in Mongolia. As (arsenic) was also much higher for the Mongolian road dust than the others. The sulfate, chloride, and As mainly come from coal burning activity, suggesting that coal and biomass combustion in Mongolia during the heating season should affect the size and chemical components of the fine road dust. Cu (copper) and Zn (zinc), carbonaceous particles (organic carbon [OC] and elemental carbon [EC]) increased at sites in Korea, suggesting that the fine road dust at these sites was significantly affected by the high volume of traffic (engine emission and brake/tire wear). Our results suggest that chemical profiles for road dust specific to certain sites should be applied to more accurately apportion road dust source contributing to the ambient particulate matter.

Implications: Size and chemical characteristics of fine road dust at sites having distinct urban characteristics were examined. Residential coal and biomass burning and traffic affected physiochemical properties of the fine road dust. Different road dust profiles at different sites should be needed to determine the ambient PM2.5 sources more accurately.     

Physical Characterization and Pre-assessment of Recycled High-Density Polyethylene as 3D Printing Material

3D printing has received lots of attention due to its limitless potential and advantages in comparison to traditional manufacturing processes. This study focuses on the most popular type of home 3D printers, namely fused filament fabrication (FFF) printers, which use plastic filaments as the feedstock. The rather high material cost and large amount of plastic waste generated by FFF 3D printers have driven the need for plastic filaments produced from recycled plastic waste. This study evaluates, in terms of physical characterization, the feasibility of using recycled high-density polyethylene (HDPE), one of the most commonly used plastics, as the feedstock for 3D printers, in comparison with the common acrylonitrile butadiene styrene plastic pellets. In-house extrusion using recycled HDPE pellets and flakes is possible. The diameter consistency and extrusion rate results, along with other physical characterization results, including differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared spectroscopy, Raman spectroscopy, and water absorption, suggest that making filaments from recycled HDPE pellets is a viable option, as the obtained filament has favorable water rejection and comparable extrusion rate and thermal stability. Existing methods for overcoming the warping and adhesion problems in 3D printing with HDPE were also reviewed. In order to increase the market competitiveness of waste-derived filaments, optimization of the extrusion process, studies on the mechanical and aging properties, and development of a standard characterization methodology and database are crucial.     

A new joint publication

Special FeatureWaste Management Research in Korea

A new joint publication     

Relationship of urinary arsenic metabolites to intake estimates in residents of the Red River Delta, Vietnam

This study investigated the status of arsenic (As) exposure from groundwater and rice, and its methylation capacity in residents from the Red River Delta, Vietnam. Arsenic levels in groundwater ranged from <1.8 to 486 μg/L. Remarkably, 86% of groundwater samples exceeded WHO drinking water guideline of 10 μg/L. Also, estimated inorganic As intake from groundwater and rice were over Provisional Tolerable Weekly Intake (15 μg/week/kg body wt.) by FAO/WHO for 92% of the residents examined. Inorganic As and its metabolite (monomethylarsonic acid and dimethylarsinic acid) concentrations in human urine were positively correlated with estimated inorganic As intake. These results suggest that residents in these areas are exposed to As through consumption of groundwater and rice, and potential health risk of As is of great concern for these people. Urinary concentration ratios of dimethylarsinic acid to monomethylarsonic acid in children were higher than those in adults, especially among men, indicating greater As methylation capacity in children.