Emission of particulate and gaseous pollutants from household laser processing machine

Indoor air quality (IAQ) directly affects the health of occupants. Household manufacturing equipment (HME) used for hobbies or educational purposes is a new and unexplored source of air pollution. In this study, we evaluated the characteristics of particulate and gaseous pollutants produced by a household laser processing equipment (HLPE). Various target materials were tested using a commercial HLPE under various operating conditions of laser power and sheath air flow rate. The mode diameters of the emitted particles gradually decreased as laser power increased, while the particle number concentration (PNC) and particle emission rate (PER) increased. In addition, as the sheath air flow rate quadrupled from 10 to 40 L/min, the mode diameter of the emitted particles decreased by nearly 25%, but the effect on the PNC was insignificant. When the laser induced the target materials at 53 mW, the mode diameters of particles were <150 nm, and PNCs were >2.0 × 10⁴ particles/cm³. Particularly, analyses of sampled aerosols indicated that harmful substances such as sulfur and barium were present in particles emitted from leather. The carcinogenic gaseous pollutants such as acrylonitrile, acetaldehyde, 1,3-butadiene, benzene, and C₈ aromatics (ethylbenzene) were emitted from all target materials. In an actual indoor environment, the PNC of inhalable ultrafine particles (UFPs) was >5 × 10⁴ particles/cm³ during 30 min of HLPE operation. Our results suggest that more meticulous control methods are needed, including the use of less harmful target materials along with filters or adsorbents that prevent emission of pollutants.     

Evaluation of SWAT sub-daily runoff estimation at small agricultural watershed in Korea

A study was undertaken for the prediction of runoff flow from 0.8 ha field-sized agricultural watershed in South Korea using Soil and Water Assessment Tool (SWAT) sub-daily. The SWAT model with sub-daily configuration predicted flow from the watershed within the range of acceptable accuracy. The SWAT sub-daily simulations were carried out for a total of 18 rainfall events, 9 each for calibration and validation. Overall trend and extent of matching simulated flow for the rainfall events in 2007-2008 with measured data during the calibration process were coefficient of determination (R²) value of 0.88 and Nash and Sutcliffe Efficiency (E_NS) value of 0.88. For validation, R² and E_NS values were 0.9 and 0.84, respectively. Whereas R² and E_NS values for simulation results using daily rainfall data were 0.79 and -0.01, respectively, that were observed to be out of acceptable limits for the model simulation. The importance of higher time resolution (hourly) precipitation records for flow simulation were evaluated by comparing R² and E_NS with 15 min, 2 h, 6 h and 12 h precipitation data, which resulted in lower statistics with increases in time resolution of precipitation data. The SWAT sub-daily sensitivity analysis was performed with the consideration of hydraulic parameter and was found as in the rank order of CN2 (curve number), ESCO (soil evaporation compensation factor), GW_DELAY (ground water delay time), ALPHA_BF ( base flow alpha factor), GWQMN ( a threshold minimum depth of water in the shallow aquifer required for return flow to occur) , REVAPMN (minimum depth of water in shallow aquifer for re-evaporation to occur) , LAT_TIME (lateral flow travel time) respectively. These sensitive parameters were evaluated at 10% higher and lower values of the parameters, corresponding to 70.5% higher and 23.2% lower in simulated flow out from the SWAT model. From the results obtained in this study, hourly precipitation record for SWAT sub-daily with Green-Ampt infiltration method was proven to be efficient for runoff estimation at field sized watershed with higher accuracies that could be efficiently used to develop site-specific Best Management Practices (BMPs) considering rainfall intensity, rather than simply using daily rainfall data.     

Assessment of Young Dong tributary and Imgok Creek impacted by Young Dong coal mine, South Korea

An initial reclamation of the Young Dong coal mine site, located in northeastern South Korea, was completed in 1995. Despite the filling of the adit with limestone, acid rock drainage (ARD) enters Young Dong tributary and is then discharged to Imgok Creek. This ARD carries an average of 500 mg CaCO(3)/l of mineral acidity, primarily as Fe(II) and Al. Before spring runoff, the flow of Imgok Creek is 3.3-4 times greater than that of the tributary and has an alkalinity of 100 mg CaCO(3)/l, which is sufficient to eliminate the mineral acidity and raise the pH to about 6.5. From April through September 2008, there were at least two periods of high surface flow that affects the flow of ARD from the adit. Flow of ARD reaches 2.8 m(3)/min during spring runoff. This raised the concentrations of Fe and Al in the confluence with Imgok Creek. However, by 2 km downstream the pH of the Imgok Creek is 6.5 and only dissolved Fe is above the Korean drinking water criteria (0.30 mg/l). This suggests only a minor impact of Young Dong Creek water on Imgok Creek. Acid digestion of the sediments in Imgok Creek and Young Dong Tributary reveals considerable abundances of heavy metals, which could have a long-term impact on water quality. However, several water-based leaching tests, which better simulate the bioavailable metals pool, released only Al, Fe, Mn, and Zn at concentrations exceeding the criteria for drinking water or aquatic life.     

Solubilization of water-insoluble beta-glucan isolated from Ganoderma lucidum

The fungal beta-D-glucan is a biological response modifier (BRM), but a major obstacle to the clinical utilization of beta-glucan BRMs is thei relative lack of solubility in aqueous media. Water insoluble fungal glucans extracted by alkali from the mycelia of Ganoderma lucidum were sulfated to yield their corresponding water-soluble derivatives. Insoluble glucan is dissolved in methyl sulfoxide and urea, and is partially sulfated with sulfuric acid. The sulfated glucan (SGL) yield prepared from insoluble glucan (IGL) was 85%, the sulfation degree of SGL was about 14.9%, and the solubility of SGL was above 95% in water. The monosugar SGL content was 34.9% alpha-glucose and 35.9% beta-glucose. The mean molecular weight (MW) of SGL was shown as a single peak on Sepharose CL-4B column chromatography, and their MW was approximately 9.3 kDa. The 13C NMR spectrum analysis shows that SGL has a high similarity with the beta-(1-->3)-linked triple-helical control.     

Managing stormwater for urban sustainability: an evaluation of local comprehensive plans in the Chesapeake Bay watershed region

This study uses a developed plan coding protocol in evaluating the quality of 76 comprehensive plans to examine whether local comprehensive plans have adequately integrated the concepts of sustainable stormwater management. The Chesapeake Bay watershed was chosen for the investigation because degraded stormwater runoff from nearby urban and suburban jurisdictions have critically polluted the watershed. The findings indicate that the majority of local governments have not sufficiently incorporated the sustainable stormwater management principles into their comprehensive plans. Five plan components (factual basis, goals and objectives, inter-organizational cooperation, policies, tools and strategies, and implementation) appear weak in realizing the concepts. The current study concludes by providing policy implications and recommendations to increase awareness and understanding of sustainable stormwater management concepts and to produce better implementation plans that integrate stormwater, ecosystem, and environmental planning comprehensively.     

Release of arsenic (As) and lead (Pb) from quicklime-sulfate stabilized/solidified soils under diffusion-controlled conditions

A quicklime-sulfate-based stabilization/ solidification (S/S) process for arsenic (As) and lead (Pb) immobilization was evaluated under “semi-dynamic” leaching conditions. In order to simulate aggressive leaching conditions the semi-dynamic leaching tests was modified by using 0.014 N of acetic solution instead of distilled water. Kaolinite-sand and montmorillonite-sand soil samples were artificially contaminated with As and Pb, compacted and cured for 28 days. The semi-dynamic leaching tests were then conducted for 90 days. The effectiveness of the S/S treatment was evaluated by assessing the cumulative release of As and Pb as well as by determining the diffusion coefficients (D _eff) and leachability indices (LX). The release of As and Pb was greatly reduced by quicklime-sulfate treatment as compared to untreated samples. Moreover, the quicklime-sulfate treatment was more effective than the quicklime-only treatment in reducing both As and Pb release. The controlling leaching mechanisms were determined using a diffusion theory model. Upon S/S treatment, As and Pb release was diffusion controlled. The LX of all the treated samples were greater than nine, suggesting that S/S treated samples were suitable for “controlled utilization”.     

Distribution of perfluorochemicals between sera and milk from the same mothers and implications for prenatal and postnatal exposures

The levels of six perfluorocarboxylates (PFCAs), four perfloroalkylsulfonates (PFASs), and one sulfonamide were measured in paired samples of maternal serum, umbilical cord serum, and breast milk. The maternal and cord sera were strongly correlated with each other for all measured compounds (r > 0.5 and p < 0.01). Nevertheless, there was a significant difference in compound composition profile between the two sera matrices, with a more depletion of the longer chain compounds in cord serum. The transfer efficiency values from maternal to cord serum (TF_CS/MS) decreased by 70% with each increasing unit of -CF₂ chain within a PFCA group, and for perfluorooctanesulfonate (PFOS), by a half compared to perfluorooctanoate (PFOA). In contrast to the strong correlation in concentrations between the two sera matrices, the pattern of compounds in breast milk differed considerably with those in sera. Accordingly, compound- and matrix-specific transfer must be considered when assessing prenatal and postnatal exposure.     

Highly siliceous MCM-48 from rice husk ash for CO2 adsorption

Mesoporous MCM-48 silica was synthesized using a cationic-neutral surfactant mixture as the structure-directing template and rice husk ash (RHA) as the silica source. The MCM-48 samples were characterized by X-ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), N₂ physisorption and SEM. X-ray diffraction pattern of the resulting MCM-48 revealed typical pattern of cubic Ia3d mesophase. BET results showed the MCM-48 to have a surface area of 1024 m²/g and FT-IR revealed a silanol functional group at about 3460 cm⁻¹. Breakthrough experiments in the presence of MCM-48 were also carried out to test the material's CO₂ adsorption capacity. The breakthrough time for CO₂ was found to decrease as the temperature increased from 298 K to 348 K. The steep slopes observed shows the CO₂ adsorption occurred very quickly, with only a minimal mass transfer effect and very fast kinetics. In addition, amine grafted MCM-48, APTS-MCM-48 (RHA), was prepared with the 3-aminopropyltriethoxysilane (APTS) to investigate the effect of amine functional group in CO₂ separation. An order of magnitude higher CO₂ adsorption capacity was obtained in the presence of APTS-MCM-48 (RHA) compared to that with MCM-48 (RHA). These results suggest that MCM-48 synthesized from rice husk ash could be usefully applied for CO₂ removal.     

Solubility of organic acids in various methanol and salt concentrations: the implication on organic acid sorption in a cosolvent system

The well-known cosolvency-induced sorption model is not applicable to predict the sorption of carboxylic acids in cosolvent system. To investigate the phenomenon, sorption and solubility of chlorinated phenols (2,4-dichlorophenol (2,4-DCP) and 2,4,6-trichlorophenol (2,4,6-TCP)) and carboxylic acids (benzoic acid and 2,4-dichlorophenoxyacetic acid (2,4-D)) were measured in soil-methanol mixture with various ionic strengths. The sorption (K_m) of chlorinated phenols was explained by a cosolvency-induced sorption model; the inverse log-linear relationship between the K_m and methanol volume fraction (f_c). However, the K_m of carboxylic acids increased with increasing f_c. This discrepancy was attributed to the effect of the carboxylic moiety. To explain the effect, solubility was measured for benzoic acid and 2,4,6-TCP from various liquid conditions. For both solutes, the cosolvency power (σ) increased with CaCl₂ concentrations and the salting constant (K^s) became smaller as f_c increased. However, the σ value at a given salt concentration and the K^s value at a given f_c were greater for 2,4,6-TCP than for benzoic acid, both of which were due to the greater hydrophobicity of the former. Overall, the solubility profiles of the both solutes on combination of f_c and CaCl₂ concentration evidenced no specific role of the carboxylic moiety. Therefore, it can be reasonably concluded that the positive relationship between K_m and f_c for carboxylic organic acid can be attributed to the modification of the activity coefficient occurred in the solid phase, which cannot be traceable by cosolvency-based model.     

Effect of seepage conditions on chemical attenuation of arsenic by soils across an abandoned mine site

The effect of seepage velocity on the As leaching/adsorption by soils collected from abandoned mine sites was evaluated under batch equilibrium and different seepage settings. The breakthrough curves (BTCs) of As leaching from the mine soil column initially displayed the peak export and gradually leveled off over the leaching experiment. A similar As peak was observed after a flow interruption period. Adsorption by downgradient soils was clearly nonlinear, as Freundlich N was <1. In the BTCs of the layered columns, where downgradient soils were overloaded above the mine soil, the extended lag period of As appearance and lower steady-state As concentration observed for slow seepage velocity supported the idea of kinetically limited As attenuation driven by soil adsorption. The perturbation of As concentration was insignificant when the intra-column As concentration gradient was higher. The As concentration drop and time to recovery were greater for less adsorptive soil and fast seepage velocity. Desorption of As from soils retrieved from both batch adsorption and column experiment demonstrate hysteric behavior. The results of this work demonstrated that the risk of As leaching from an abandoned mine site can be greatly attenuated by intermediate downgradient soils via chemical adsorption, which tends to be kinetically limited and energetically hysteric (i.e., non-identical energy pathway).