Forensic fingerprinting and source identification of the 2009 Sarnia (Ontario) oil spill

This paper presents a case study in which integrated forensic oil fingerprinting and data interpretation techniques were used to characterize the chemical compositions and determine the source of the 2009 Sarnia (Ontario) oil spill incident. The diagnostic fingerprinting techniques include determination of hydrocarbon groups and semi-quantitative product-type screening via gas chromatography (GC), analysis of oil-characteristic biomarkers and the extended suite of parent and alkylated PAH (polycyclic aromatic hydrocarbon) homologous series via gas chromatography-mass spectrometry (GC-MS), determination and comparison of a variety of diagnostic ratios of "source-specific marker" compounds, and determination of the weathering degree of the spilled oil, and whether the spilled oil hydrocarbons have been mixed with any other "background" chemicals (biogenic and/or pyrogenic hydrocarbons). The detailed chemical fingerprinting data and results reveal the following: (1) all four samples are mixtures of diesel and lubricating oil with varying percentages of diesel to lube oil. Both samples 1460 and 1462 are majority diesel-range oil mixed with a smaller portion of lube oil. Sample 1461 contains slightly less diesel-range oil. Sample 1463 is majority lubricating-range oil. (2) The diesel in the four diesel/lube oil mixture samples was most likely the same diesel and from the same source. (3) The spill sample 1460 and the suspected-source sample 1462 have nearly identical concentrations and distribution patterns of target analytes including TPHs, n-alkane, PAHs and biomarker compounds; and have nearly identical diagnostic ratios of target compounds as well. Furthermore, a perfect "positive match" correlation line (with all normalized ratio data points falling into the straight correlation line) is clearly demonstrated. It is concluded that the spill oil water sample 1460 (#1, from the water around the vessel enclosed by a boom) matches with the suspected source sample 1462 (#3, from the vessel engine room bilge pump). (4) From the n-alkane and PAH analysis, it appears that the oil in the spill sample 1460 is slightly more weathered in comparison with sample 1462. The minor differences in fingerprints of two samples were most likely caused by weathering effects. (5) Sample 1461 (#2, from the vessel engine room bilge) and sample 1463 (#4, from the vessel bilge waste collection tank) demonstrated significantly different fingerprints and diagnostic ratios of target compounds from that of spill sample 1460. This was caused most likely by percentages of diesel to lube oil in these two samples different from that in spill sample 1460.     

Turner syndrome-omphalocele association: Incidence,karyotype, phenotype and fetal outcome

Objective

Omphalocele is known to be associated with genetic anomalies like trisomy 13, 18 and Beckwith–Wiedemann syndrome, but not with Turner syndrome (TS). Our aim was to assess the incidence of omphalocele in fetuses with TS, the phenotype of this association with other anomalies, their karyotype, and the fetal outcomes.

Method

Retrospective multicenter study of fetuses with confirmed diagnosis of TS. Data were extracted from a detailed questionnaire sent to specialists in prenatal ultrasound.

Results

680 fetuses with TS were included in this analysis. Incidence of small omphalocele in fetuses diagnosed ≥12 weeks was 3.1%. Including fetuses diagnosed before 12 weeks, it was 5.1%. 97.1% (34/35) of the affected fetuses had one or more associated anomalies including increased nuchal translucency (≥3 mm) and/or cystic hygroma (94.3%), hydrops/skin edema (71.1%), and cardiac anomalies (40%). The karyotype was 45,X in all fetuses. Fetal outcomes were poor with only 1 fetus born alive.

Conclusion

TS with 45,X karyotype but not with X chromosome variants is associated with small omphalocele. Most of these fetuses have associated anomalies and a poor prognosis. Our data suggest an association of TS with omphalocele, which is evident from the first trimester.     

Energy recovery from grass using two-phase anaerobic digestion

Municipal solid wastes are major sources of air, water and soil contamination. There is a need for alternative waste management techniques to better utilize the waste and minimize its adverse environmental impact. A two-phase pilot-scale bio-fermentation system was used to evaluate the feasibility of producing methane from grass waste, a major constituent of solid wastes. The bi-phasic system consists of a solid phase and a methane phase. Leachate is re-circulated through the solid phase until a desired level of volatile fatty acid (VFA) is accumulated in the leachate. The leachate is then transferred to the methane reactor where the VFA is converted to methane. The results showed that 67% of the volatile solids in the waste can be converted into soluble chemical oxygen demand in a period of six months. The system produced an average of 0.15 m3 of methane per kg of grass. The average methane concentration in the produced gas was 71%. A mathematical model was developed to estimate the methane and carbon dioxide concentrations in the gas phase as a function of reactor properties.     

Comparison of macroinvertebrate community structure in urban (Shenzhen City) streams with typical habitat characteristics北大核心CSCD

2020年12月在深圳市城市区域典型生境特征溪流——城市山区源头溪流金龟河、国家地质公园保护区入海溪流杨梅坑河与黑臭水体治理后溪流石溪河,开展底栖动物多样性与生境质量状况取样,通过多元统计分析探明各溪流底栖动物群落结构差异及其主要环境影响因子.结果表明:(1)金龟河底质异质性(SI)最高;杨梅坑河水质最好且流态异质性(Fr)最优,石溪河水质最差且底质异质性(Fr)最低.(2)共采集鉴定大型底栖动物118个分类单元,隶属于3门6纲14目87科.水生昆虫均占绝对优势,其中金龟河67属(81.7%),杨梅坑河62属(95.4%),石溪河12属(52.2%).金龟河中底栖动物Shannon-Wiener多样性指数、改进的Shannon-Wiener多样性指数、Pielou均匀度均高于杨梅坑河与石溪河.(3)金龟河的主要功能摄食类群是滤食者(45.5%),杨梅坑河(38.3%)与石溪河(58.7%)的主要功能摄食类群均为收集者.(4)冗余分析(RDA)结果显示,氨氮、海拔、湿宽、水温、溶氧、底质异质性(SI)、电导率和流态异质性(Fr)为影响深圳市溪流的大型底栖动物群落结构的主要环境因子.研究表明:(1)深圳市的山区溪流可作为深圳市生物多样性保护的重点区域.(2)在城市溪流生态系统中,水环境化学因子并非为主要影响因子,生境多样性发挥了重要作用.(图6表3参43)     

Predicting future invasion risk of three widespread malignant weeds on Qinghai-Tibet Plateau,using multi-algorithm ensemble models北大核心CSCD

农田恶性杂草相比普通杂草的传播更为迅速且难以有效防治,对农业生产危害严重.明确典型恶性杂草当前潜在分布面积及未来气候变化下对耕地的潜在入侵风险对农业生产管理具有重要意义.以广泛分布于青藏高原农田中的3种常见恶性杂草,即野燕麦(Avena fatua L.)、一年生早熟禾(Poa annua L.)和狗尾草[Setaria viridis(L.)P.Beauv.]为研究对象,利用广义增强模型(GBM)、广义线性模型(GLM)、人工神经网络(ANN)、最大熵(MaxEnt)、随机森林(RF)及多元自适应回归样条(MARS)算法集合预测上述3种杂草在青藏高原的潜在地理分布以及驱动其变化的关键因子,以评估其对耕地的入侵风险.未来气候场景采用最新的第六次国际耦合模式比较计划(CMIP6)框架下2050年的4种共享经济路线(SSP1-2.6、2-4.5、3-7.0、5-8.5).结果显示:野燕麦适宜分布区面积约为3.5912×10^(5) km^(2),主要分布于四川西南部及青海东部,零星分布于甘肃、西藏和新疆;一年生早熟禾和狗尾草的适宜分布区面积约为4.3046×10^(5) km^(2)和2.0036×10^(5) km^(2),均主要分布于四川西南部和西藏东南部,零星分布于青海东部和甘肃南部.年均温是3种杂草分布的最主要驱动因子.此外,人类足迹和土壤有效氮是影响野燕麦分布的相对重要因子;土壤酸碱度、最暖季降水量是影响一年生早熟禾分布的重要因子;温度季节性、最暖季降水量是影响狗尾草分布的重要因子.预计至2050年,3种杂草在4种情境下均会出现不同程度的扩张,狗尾草的扩张面积表现出随辐射强迫的增强呈先升高后趋于稳定的趋势,而另两种杂草则呈先升后降的趋势.预计3种杂草的潜在分布面积在耕地中的占比与扩张面积的变化趋势一致,且在主产区的占比高于非主产区.模拟结果表明,未来气候变化下,随着3种恶性杂草的适宜分布区面积的扩张,其对青藏高原耕地的入侵风险将增加,尤其是粮食主产区所面临威胁更为严峻,建议应重点关注青藏高原粮食主产区恶性杂草的生理生态、迁移扩散和防治技术研究.(图6表2参61)     

Effects of bio-organic fertilizers on pineapple heart rot and bacterial community structure北大核心CSCD

Heart rot is a common soil-borne disease in the pineapple industry, but the situation can be alleviated by the application of bio-fertilizers with beneficial microbiomes. Clarifying the controlling mechanism of bio-organic fertilizer on the high incidence of heart rot is critical in monocultural pineapple cropping patterns. In our study, the soil of continuous cropping pineapple orchards was collected. Three types of carriers (rapeseed cake, peat soil, and coconut bran), biocontrol strains (Bacillus subtilis HL2 and Streptomyces strain HL3), and organic fertilizer (YJ) were composted into different bio-fertilizers (KC, KN, KY, LC, LN, and LY), which were used in pot experiments. The controlling effect of the bio-fertilizer was determined based on the response of pineapple heart rot and bacterial communities to different fertilizing methods. Our results revealed that the incidence of heart rot in bio-fertilizer KC was the lowest, which decreased by 20% and 13.3%, respectively, compared to HF (chemical fertilizer, 16-16-16) and YJ (organic fertilizer). The richness and diversity of soil bacterial communities in all biofertilized treatments (KC, KN, KY, LC, LN, and LY) were significantly higher than those in HF. However, the α-diversity indices of the bio-fertilizers (KC, KN, and KY) were higher than those of LC, LN, and LY, and the bacterial community composition was significantly different. The bacteria GP4, GP6, Bacillus, and Azohydromonas were enriched in KC, KN, and KY, while the relative abundance of Streptomyces increased significantly in LC, LN, and LY. Furthermore, Spearman correlation analysis showed that the relative abundance of these bacterial groups was significantly negatively correlated with the incidence of pineapple heart rot. In summary, the application of bio-organic fertilizers can decrease the incidence of pineapple heart rot by altering the soil bacterial community structure and stimulating beneficial soil microorganisms, which is important for reconstructing the ecological balance in continuous pineapple orchards. © 2022 Authors. All rights reserved.     

Effect of different pearling times on the quality of hull-less barley rice北大核心CSCD

Hull-less barley is a special food crop rich in various nutrients in Qinghai-Tibet Plateau. Six-pearling is often used to produce commercial hull-less barley rice in order to improve its rough taste and inferior cooking quality. This study evaluated the differences in the nutritional, cooking, sensory, and storage qualities of hull-less barley rice with different pearling times to obtain suitable processing conditions for the production of high-quality hull-less barley rice. With increasing pearling time, the contents of vitamin B6, vitamin E, dietary fiber, iron, zinc, phenols, and flavonoids significantly decreased to a large extent, protein and vitamin B3 decreased slightly, the contents of total starch and β-glucan increased significantly, and γ-aminobutyric acid (GABA) initially increased and then decreased. The peak, trough, and final viscosity of whole grain barley were 1 860.50 cP, 914.50 cP, and 2 150.00 cP, respectively, and increased after six-pearling to 4 219.00 cP, 2 628.00 cP, and 5 074.00 cP, respectively. At the same time, the water absorption and volume expansion of the pearled hull-less barley increased significantly. The hardness of pearled hull-less barley reduced from 4 708.50 g to 2 282.00 g, its adhesiveness increased from 0.00 to -7.33, and its taste and sensory quality exhibited better. The activities of α-amylase, polyphenol oxidase, lipase, and catalase in pearled hull-less barley slightly decreased. Hull-less bran flour is rich in a variety of nutritional components and could be a potential resource with great developmental value. In general, hull-less barley rice obtained from three-pearling has high nutritional value, high cooking quality, low enzyme activity, and low energy consumption; therefore, it can be used to produce high-quality barley rice. This study provides important information for high-quality pearled hull-less barley and further utilization of barley bran flour. © 2022 Science Press. All rights reserved.     

Simulation of flow and shear stress distribution on the Oceano Dunes,implications for saltation and dust emissions

Environmental Fluid Mechanics - Wind-driven shear stresses drive saltation and dust emissions over sand dunes. However, the complex topography of coastal dunes and practical difficulties in...     

Assessing the impact of biological control of Plutella xylostella through the application of Lotka–Volterra model

The Lotka–Volterra model was applied to the population densities of diamondback moth (DBM), Plutella xylostella (L.) and its exotic larval parasitoid Diadegma semiclausum (Hellen) data that was collected earlier by icipe's DBM biological control team. The collections were done for 15 months before the release and 36 months after release of the parasitoid in two areas; in Werugha, Coast Province of Kenya and Tharuni, Central Province of Kenya, respectively. For each area in pre- and post-release periods, we estimated Lotka–Volterra model parameters from the minimization of the loss function between the theoretical and experimental time-series datasets following the Nelder-Mead multidimensional method. The model estimated a reduction in the value of the steady state of DBM population from 4.86 to 2.17 in Werugha and from 6.11 to 3.76 and 3.45 (with and without exclusion of the time before D. semiclausum recovery) in Tharuni when transiting from the pre- and post-release periods, respectively. This change was a consequence of the newly introduced parasitoid, in the areas. The study presented a successful and detailed technique for non-linear model parameters restoration which was demonstrated by the correct mimicking of empirical datasets from the classical biological control with D. semiclausum, in different areas of Kenya. The applied model has measured the parasitoids impact on the DBM biological control through a quantitative estimate of the effectiveness of the newly introduced species D. semiclausum. These equations may therefore be used as tool for decision making in the implementation for such pests’ management system strategy.     

Soil erosion hazard evaluation—An integrated use of remote sensing,GIS and statistical approaches with biophysical parameters towards management strategies

Soil erosion hazard maps can be an essential tool in erosion prone areas as they explain and display the distribution of hazards and areas likely to be affected to different magnitudes. Therefore, it is very useful to planners and policy makers initiating remedial measures and for prioritizing areas. In this study, a numerical model was developed for soil erosion hazard assessment, in which Z-score analysis was combined with a geographical information system (GIS) to compute a synthetic soil erosion hazard index (SEHI). For this model, nine factors which have notable impact on soil erosion were selected. To generate the selected factors remote sensing, analytical hierarchy process (AHP) and GIS techniques along with spatial models were applied. To standardize all of the factors and establish the factor weights, the AHP method was adopted. For Z-score analysis with selected standardized factors, the Integrated Land and Water Information System (ILWIS) software was used and nine individual layers with Z-scores were prepared. Afterwards, the layers were integrated with their factor weights by means of a weighted linear combination to derive a SEHI value for each pixel. To classify the discrete SEHI map to represent a meaningful regionalization of soil erosion hazard, the equal distance cluster principle was used and graded into four levels of hazard; very high, high, moderate and low. The results depicted that in general, a moderate hazardous condition of soil erosion was found in the study area and the proposed approach was also able to identify the areas under high and very high hazards that require urgent intervention on a priority basis. Based on this study, comprehensive erosion hazard management strategies were anticipated for the efficient management of present and future erosion disaster in the area.