Night-time atmospheric chemistry of methacrylates

Background, aim, and scope  

Methacrylates are α, β-unsaturated esters that are widely used in the polymer plastics and resins production. Kinetic information of NO₃ radical reactions is especially scarce and a good understanding of all the atmospheric oxidation processes of these compounds is necessary in order to determine lifetimes in the atmosphere and to evaluate the impact of these reactions on the formation of ozone and other photooxidants.     

Personal care product use and urinary levels of phthalate metabolites in Mexican women

Sources of phthalates other than Polyvinyl chloride (PVC) related products are scarcely documented in Mexico. The objective of our study was to explore the association between urinary levels of nine phthalate metabolites and the use of personal care products. Subjects included 108 women who participated as controls in an ongoing population-based case-control study of environmental factors and genetic susceptibility to breast cancer in northern Mexico. Direct interviews were performed to inquire about sociodemographic characteristics, reproductive history, use of personal care products, and diet. Phthalate metabolites measured in urine by high performance liquid chromatography-isotope dilution tandem mass spectrometry were monoethyl phthalate (MEP), monobenzyl phthalate (MBzP), mono-n-butyl phthalate (MBP), mono-isobutyl phthalate (MiBP), mono-3-carboxypropyl phthalate (MCPP) as well as mono-2-ethylhexyl phthalate (MEHP), mono-2-ethyl-5-oxohexyl phthalate (MEOHP), mono-2-ethyl-5-hydroxyhexyl phthalate (MEHHP), mono-2-ethyl-5-carboxypentyl phthalate (MECPP) that are metabolites of di-ethylhexyl phthalate (DEHP). Detectable urinary concentrations of phthalate metabolites varied from 75% (MEHP) to 100% (MEP, MBP, MEOHP, MEHHP and MECPP). Medians of urinary concentrations of some phthalate metabolites were significantly higher among users of the following personal care products compared to nonusers: body lotion (MEHHP, MECPP and sum of DEHP metabolites (ΣDEHP)), deodorant (MEHP and ΣDEHP), perfume (MiBP), anti-aging facial cream (MEP, MBP and MCPP) and bottled water (MCPP, MEHHP and MEOHP). Urinary concentrations of MEP showed a positive relationship with the number of personal care products used. Our results suggest that the use of some personal care products contributes to phthalate body burden that deserves attention due to its potential health impact.     

210Pb-dating of a lake sediment core from Lough Carra (Co. Mayo, western Ireland): use of paleolimnological data for chronology validation below the 210Pb dating horizon

The chronologies and sediment accumulation rates for a lake sediment sequence from Lough Carra (Co. Mayo, western Ireland) were established by applying the constant initial concentration (CIC) and constant rate of supply (CRS) hypotheses to the measured ²¹⁰Pb_excess profile. The resulting chronologies were validated using the artificial fallout radionuclides ¹³⁷Cs and ²⁴¹Am, which provide independent chronostratigraphic markers for the second half of the 20th century. The validity of extrapolating the derived CIC and CRS dates below the ²¹⁰Pb dating horizon using average sedimentation rates was investigated using supplementary paleolimnological information and historical data. Our data confirm that such an extrapolation is well justified at sites characterised by relatively stable sedimentation conditions.     

Assessment of exposure to PCB 153 from breast feeding and normal food intake in individual children using a system approach model

Investigators have typically relied on a single or few discrete time points as measures of polychlorinated biphenyl (PCB) body burden, however health effects are more likely to be the result of integrative exposure in time, optionally expressed as an area under the time curve (AUC) of PCB serum concentration. Using data from a subgroup of 93 infants from a birth cohort in eastern Slovakia—a region highly polluted by PCBs—we fit a system type model, customized to our longitudinal measures of serum PCB concentrations in cord, 6, 16, and 45 month blood specimens. The most abundant congener, PCB 153, was chosen for modeling purposes. In addition to currently used methods of exposure assessment, our approach estimates a concentration time profile for each subject, taking into account mean residence time of PCB 153 molecules in the body, duration of breast feeding, hypothetical PCB 153 concentration in steady-state without breast feeding and alternately without normal food intake. Hypothetical PCB 153 concentration in steady-state without normal food intake correlates with AUC (r = 0.84, p < 0.001) as well as with duration of breast feeding (r = 0.64, p < 0.001). It makes possible to determine each subject’s exposure profile expressed as AUC of PCBs serum concentration with a minimum model parameters. PCB body burden in most infants was strongly associated with duration of breast feeding in most, but not all children, was apparent from model output.     

Reducing the environmental impact of methane emissions from dairy farms by anaerobic digestion of cattle waste

Four dairy cattle farms considered representative of Northern Spain milk production were studied. Cattle waste was characterised and energy consumption in the farms was inventoried. Methane emissions due to slurry/manure management and fuel consumption on the farms were calculated. The possibility of applying anaerobic digestion to the slurry to minimise emissions and of using the biogas produced to replace fossil fuels on the farm was considered. Methane emissions due to slurry management (storage and use as fertiliser) ranged from 34 to 66 kg CH₄ cow⁻¹ year⁻¹ for dairy cows and from 13 to 25 kg CH₄ cow⁻¹ year⁻¹ for suckler calves. Cattle on these farms are housed for most of the year, and the contribution from emissions from manure dropped in pastures is insignificant due to the very low methane conversion factors. If anaerobic digestion were implemented on the farms, the potential GHG emissions savings per livestock unit would range from 978 to 1776 kg CO₂ eq year⁻¹, with the main savings due to avoided methane emissions during slurry management. The methane produced would be sufficient to supply digester heating needs (35-55% of the total methane produced) and on-farm fuel energy requirements.     

Correlation between physicochemical and ecotoxicological approaches to estimate landfill leachates toxicity

Leachates from municipal solid waste (MSW) landfills may contain a huge diversity of contaminants; these wastewaters should be considered as potentially hazardous complex mixtures, representing a potential environmental risk for surface and groundwater. Current MSW landfill wastes regulatory approaches deem exclusively on the physicochemical characterization and does not contemplate the ecotoxicological assessment of landfill leachates. However, the presence of highly toxic substances in consumer products requires reconsideration on the need of more specific ecotoxicological assessments. The main aim of this study was to evaluate the toxicity of different MSW landfill leachates using a battery of toxicity tests including acute toxicity tests with Daphnia magna and the anuran Xenopus laevis and the in vitro toxicity test with the fish cell line RTG-2. The additional objective was to study the possible correlation between physicochemical properties and the toxicity results obtained for untreated landfill leachates. The results showed that the proposed test battery was effective for the ecotoxicological characterization of MSW landfill leachates. A moderate to strong correlation between the measured physicochemical parameters and the calculated toxicity units was detected for all toxicity assays. Correlation factors of 0.85, 0.86 and 0.55 for Daphnia, Xenopus and RTG-2 tests, respectively, were found. The discriminant analysis showed that certain physicochemical parameters could be used for an initial categorization of the potential aquatic acute toxicity of leachates; this finding may facilitate leachates management as the physicochemical characterization is currently the most common or even only monitoring method employed in a large majority of landfills. Ammonia, alkalinity and chemical oxygen demand (COD), together with chloride, allowed a proper categorization of leachates toxicity for up to 75% of tested samples, with a small percentage of false negatives.     

Accumulation of organochlorine contaminants in loggerhead sea turtles, Caretta caretta, from the eastern Adriatic Sea

We analyzed 15 polychlorinated biphenyls (PCBs) and five organochlorine pesticides (OCPs) in fat tissue of 27 loggerhead sea turtles (Caretta caretta) from eastern Adriatic Sea with the curved carapace length ranging from 25.0 to 84.5 cm. The PCB profile was dominated by hexa- and hepta-chlorinated congeners, with PCB-153 (median: 114.9 ng g⁻¹ wet mass), PCB-138 (80.0 ng g⁻¹ w.m.), and PCB-180 (26.7 ng g⁻¹ w.m.) detected with the highest levels. Toxic mono-ortho congeners PCB-118, PCB-105 and PCB-180 with dioxin-like toxicity were found in >70% samples. 4,4′-DDE (81.0 ng g⁻¹ w.m.) prevailed the OCP signature, accounting for 80% of the total DDTs. A significant increasing trend in accumulation with size was found for PCB-52 (r_s = 0.512, p < 0.01) and PCB-114 (r_s = 0.421, p < 0.05). Comparison of our results with organochlorine contaminant (OC) pattern in some prey taxa suggest that contamination occurs primarily through the food web, with biomagnification factors of 0.14-6.99 which were positively correlated with the octanol-water partition coefficient (log K_ow; p < 0.05). This study, based upon a fairly large sample size collected mostly from incidentally captured animals over a short time period (June 2001-November 2002), present a temporal snapshot of OC contamination in wild, free-ranging loggerheads from Adriatic feeding grounds and provide a baseline for monitoring the regional OC trends in this endangered species.     

Determining C/N ratios for typical organic wastes using biodegradable fractions

It is well established that an optimal aerobic and anaerobic microbial metabolism is achieved with a C/N ratio between 20 and 30. Most studies are currently based on chemically-measured carbon and nitrogen contents. However, some organic wastes can be composed of recalcitrant carbon fractions that are not bioavailable. To know the biodegradable C/N ratio, two different methods to determine the aerobic and anaerobic biodegradable organic carbon (BOC_AE and BOC_AN) are proposed and used to analyze a wide variety of different organic samples. In general, raw wastes and digested products have more amount of BOC_AE. On the contrast, the samples collected after an aerobic treatment have higher content of BOC_AN. In any case, all the BOC fractions are lower than the total organic carbon (TOC). Therefore, the C/N ratios based on BOC are always lower than the total C/N ratio based on the TOC measure. The knowledge of the real bioavailable C/N ratio is crucial for the biological treatments of organic materials. To reduce the test time necessary for BOC determination, the values of BOC for all the samples obtained at different times were compared and correlated with the final BOC. A method that allows for the determination of BOC_AE in 4 d is proposed. In relation to the anaerobic assay, the biogas potential calculated after 21 and 50 d was positively correlated with the final potential defined after 100 d of assay.     

Biofilm formation and microbial activity in a biofilter system in the presence of MTBE, ETBE and TAME

Emerging water contaminants derived from unleaded gasoline such as methyl tert-butyl ether (MTBE), ethyl tert-butyl ether (ETBE) and tert-amyl methyl ether (TAME), are in need of effective bioremediation technologies for restoring water resources. In order to design the conditions of a future groundwater bioremediating biofilter, this work assesses the potential use of Acinetobacter calcoaceticus M10, Rhodococcus ruber E10 and Gordonia amicalis T3 for the removal of MTBE, ETBE and TAME in consortia or as individual strains. Biofilm formation on an inert polyethylene support material was assessed with scanning electron microscopy, and consortia were also analysed with fluorescent in situ hybridisation to examine the relation between the strains. A. calcoaceticus M10 was the best coloniser, followed by G. amicalis T3, however, biofilm formation of pair consortia favoured consortium M10-E10 both in formation and activity. However, degradation batch studies determined that neither consortium exhibited higher degradation than individual strain degradation. The physiological state of the three strains was also determined through flow cytometry using propidium iodide and 3′-dihexylocarbocyanine iodide thus gathering information on their viability and activity with the three oxygenates since previous microbial counts revealed slow growth. Strain E10 was observed to have the highest physiological activity in the presence of MTBE, and strain M10 activity with TAME was only maintained for 24 h, thus we believe that biotransformation of MTBE occurs within the active periods established by the cytometry analyses. Viable cell counts and oxygenate removal were determined in the presence of the metabolites tert-butyl alcohol (TBA) and tert-amyl alcohol (TAA), resulting in TBA biotransformation by M10 and E10, and TAA by M10. Our results show that A. calcoaceticus M10 and the consortium M10-E10 could be adequate inocula in MTBE and TAME bioremediating technologies.     

Concentrations and sources of Dechlorane Plus in sewage sludge

Sewage sludge from 31 urban Spanish wastewater treatment plants (WWTP) was analyzed for the emerging halogenated flame retardant Dechlorane Plus (DP). Concentrations of the two major isomers in the technical mixture, syn and anti, ranged between 0.903-19.2 and 1.55-75.1 ng g⁻¹ dry weight, respectively. Overall, concentrations of DP were lower than those of polybrominated diphenyl ethers (PBDEs) (9.10-995 ng g⁻¹ dry weight) and this is likely related to the higher usage of brominated flame retardants. The average ratio of the syn isomer to total DP (f_syn) was 0.28 ± 0.05, which is similar to that of the commercial mixture. Comparing different wastewater treatment methods, we found lower concentrations in those using biological nitrogen and phosphorous elimination, suggesting that DP is susceptible to microbial degradation and that anti-DP is more so, given the enrichment of syn-DP in the sewage sludge. Principal components analysis revealed significant positive correlation (r = 0.619, p < 0.05) between total DP concentrations with the contribution of industrial input to waste streams. This implies release of DP is related to industrial activity, likely stemming from the use of the technical product during manufacture of consumer goods. However, use and disposal of products containing DP could not be dismissed. According to our knowledge, this is the first report on DP in WWTP sludge.