Development and Evaluation of an Impactor for a PM2.5 Speciation Sampler

ABSTRACT

A conventional impactor for a particle speciation sampler was developed and validated through laboratory and field tests. The speciation sampler consists of the following components: a PM_2.5 conventional impactor that removes particles larger than 2.5 μm, an all-glass, coated honeycomb diffusion denuder, and a 47-mm filter pack. The speciation sampler can operate at two different sampling rates: 10 and 16.7 L/min. An experimental characterization of the impactor’s performance was conducted. The impactor’s collection efficiency was examined as a function of critical design parameters such as Reynolds number, the distance from the nozzle exit to the impac-tion plate, and the impaction substrate coating method. The bounce of particles larger than the cut point was successfully minimized by using a greased surface as the im-paction substrate. Additionally, a series of field intercomparison experiments were conducted at both 10 and 16.7 L/min airflow. PM_2.5 mass and SO₄ ^2- concentrations were measured and compared with the Federal Reference Method (FRM) and found to be in good agreement. Results of the laboratory chamber tests also indicated that the impactor’s performance was in good agreement with the FRM.     

Numerical simulation of flow and dispersion around an isolated cubical building: The effect of the atmospheric stratification

The aim of this work is to investigate atmospheric flow and dispersion of contaminants in the vicinity of single buildings under different stability conditions. The mathematical model used is based on the solution of equations of conservation of mass, linear momentum and energy with the use of a non-standard κ–? turbulence model. The modifications proposed in the κ–? model are the inclusion of the Kato and Launder correction in the production of turbulent kinetic energy and the use of a modified wall function. Results are presented of numerical simulations of dispersion around a cubical obstacle, under neutral, stable and unstable atmospheric conditions. Experimental data from wind tunnel and field trials obtained by previous authors are used to validate the numerical results. The numerical simulation results show a reasonable level of agreement with field and wind tunnel concentration data. The deviation between model results and field experimental data is of the same order as the deviation between field and wind tunnel data.     

Size distribution and metal composition of airborne particles in a waste management facility

Journal of Material Cycles and Waste Management - The objective of the current study was to measure the particle mass concentration, mass size distribution, and metal composition of airborne...     

Assessing the impact of risk-taking behavior on road crash involvement among University students residing in two Mediterranean countries

Surveillance systems are indispensable for injury prevention; yet, detailed electronic records are rarely available. The “Student’s Health Card” is a self-reporting electronic tool addressing health issues of University students, while aiming to actively involve them in preventive practices and health promotion. Utilizing data from the injury prevention related section, this study sought to investigate the impact of risk-taking behavior on road crash involvement among University students residing in two Mediterranean countries. A total of 978 University students, 451 Greek and 527 Italian, provided information on prior road crash involvement, as well as on eight behavioral variables, comprising a risky behavior score. Multiple logistic regression analysis was performed. The already known tendency for clustering of risky behaviors was evident. One degree increment in the risky behavior score was found to increase the risk of road crash involvement by 35%. Driving after drinking (OR = 2.55, CI = 1.53–4.26), riding with a drunk driver (OR = 2.19, CI = 1.08–4.45) and tobacco smoking (OR = 1.95, CI = 1.18–3.22) significantly multiplied the risk. Despite their better compliance with safety measures, Italian students, compared with Greek, reported worse alcohol-related driving habits and engaged more frequently in mobile phone use while driving. Clustering of risky behaviors was found to be an important predictor of road crash involvement. Screening and awareness of risk-taking propensity of University students could guide early intervention. The “Student’s Health Card” could provide, at minimal cost, reliable risk-taking and road crash involvement information, which is needed for both personal risk assessment and surveillance purposes.     

Indoor and outdoor carbon monoxide concentration relationships at different microenvironments in the Athens area

Simultaneous measurements of indoor and outdoor carbon monoxide (CO) concentrations conducted at two different microenvironments in Athens, Greece, using a non-dispersive infrared analyzer, are described in this paper. The two selected microenvironments, an office and a public school, were located in the vicinity of two streets with heavy traffic, near the center of Athens. A statistical correlation analysis of indoor concentration levels with outdoor concentrations monitored at the school and at the office, as well as with meteorological parameters and outdoor concentrations monitored at a fixed monitoring site, was conducted. Hourly indoor concentrations at the office and at the school showed a significant positive correlation with outdoor concentrations measured at both measurement locations (with correlation coefficient values R=0.74 and R=0.83 respectively) and at the fixed site (with R=0.70 and R=0.67 respectively). The correlation between indoor and outdoor concentrations was even better when hourly concentrations averaged over a 4 h period were considered (correlation coefficient values between indoor and outdoor concentrations measured at the office and at the school were R=0.85 and R=0.92 respectively and the correlation coefficient value between indoor and outdoor fixed site concentrations was R=0.75 for both sites). Mean hourly outdoor concentrations at the fixed monitoring site explained approximately 56% (R=0.75) of the variation of outdoor concentrations at the office and approximately 68 % (R=0.83) of the variation of outdoor concentrations at the school. The mean daily indoor to outdoor (I/O) ratio ranged between 0.74 and 1.00 at the office and between 0.53 and 0.89 at the school.     

Membrane Bioreactor Model for Removal of Organics from Wastewater

Abstract

The persistence of trace organics in wastewater effluent is a major environmental concern. Possible use of fixed microbial films in wastewater treatment processes is currently an active area of research that may be able to address many of these problems. In the waste effluent, the persistence of trace organics is attributed, in part, to the inability of microbial populations to extract energy from dilute environments at a rate fast enough to sustain themselves. To address this problem, a novel wastewater treatment scheme is considered. On the basis of previous hollow fiber biomass growth studies, we believe that an anaerobic biofilm supported by hollow fibers could achieve greater biomass density than a film grown on traditional impermeable supports. This in turn could lead to improved substrate removal efficiency in a reactor of a given volume. Using this concept, we developed a mathematical model to test the potential of hollow fiber membrane reactors for biodegradation of acetate solution. A computer simulation has shown that it would be possible to remove about 90% from feed solutions containing 0.1 mg-cm^-3 acetate with biomass density 25 mg-cm^-3 in the hollow fiber supported biofilm. More concentrated feeds could be effectively treated if sufficiently high biomass density could be attained. This process, therefore, shows promise in wastewater treatment. The advantages of hollow fiber membrane bioreactors are their high surface-to-volume ratio, separation of cells from flow, and high cell concentration. All of these are essential requirements for optimum utilization of biomass in wastewater treatment. The hollow fiber membrane bioreactor concept, therefore, may provide a new and unique approach to treating organics.     

Chemical Characterization of Emissions from Vegetable Oil Processing and Their Contribution to Aerosol Mass Using the Organic Molecular Markers Approach

ABSTRACT

The organic fraction of aerosol emitted from a vegetable oil processing plant was studied to investigate the contribution of emissions to ambient particles in the surrounding area. Solvent-soluble particulate organic compounds emitted from the plant accounted for 10% of total suspended particles. This percentage was lower in the receptor sites (less than 6% of total aerosol mass). Nonpolar, moderate polar, polar, and acidic compounds were detected in both emitted and ambient aerosol samples. The processing and combustion of olive pits yielded a source with strong biogenic characteristics, such as the high values of the carbon preference index (CPI) for all compound classes. Polycyclic aromatic hydrocarbons (PAHs) detected in emissions were associated with both olive pits and diesel combustion. The chromatographic profile of dimethyl-phenanthrenes (DMPs) was characteristic of olive pit combustion. Organic aerosols collected in two receptor sites provided a different pattern.

The significant contribution of vehicular emissions was identified by CPI values (~1) of n-alkanes and the presence of the unresolved complex mixture (UCM). In addition, PAH concentration diagnostic ratios indicated that emissions from catalyst and noncatalyst automobiles and heavy trucks were significant. The strong even-to-odd predominance of n-alkanols, n-alkanoic acids, and their salts indicated the contribution of a source with biogenic characteristics. However, the profile of DMPs at receptor sites was similar to that observed for diesel particulates. These differences indicated that the contribution of vegetable oil processing emissions to the atmosphere was negligible.     

Dependence of home outdoor particulate mass and number concentrations on residential and traffic features in urban areas

The associations between residential outdoor and ambient particle mass, fine particle absorbance, particle number (PN) concentrations, and residential and traffic determinants were investigated in four European urban areas (Helsinki, Athens, Amsterdam, and Birmingham). A total of 152 nonsmoking participants with respiratory diseases, not exposed to occupational pollution, were included in the study, which comprised a 7-day intensive exposure monitoring period of both indoor and home outdoor particle mass and number concentrations. The same pollutants were also continuously measured at ambient fixed sites centrally located to the studied areas (fixed ambient sites). Relationships between concentrations measured directly outside the homes (residential outdoor) and at the fixed ambient sites were pollutant-specific, with substantial variations among the urban areas. Differences were more pronounced for coarse particles due to resuspension of road dust and PN, which is strongly related to traffic emissions. Less significant outdoor-to-fixed variation for particle mass was observed for Amsterdam and Birmingham, predominantly due to regional secondary aerosol. On the contrary, a strong spatial variation was observed for Athens and to a lesser extent for Helsinki. This was attributed to the overwhelming and time-varied inputs from traffic and other local sources. The location of the residence and traffic volume and distance to street and traffic light were important determinants of residential outdoor particle concentrations. On average, particle mass levels in suburban areas were less than 30% of those measured for residences located in the city center. Residences located less than 10 m from a street experienced 133% higher PN concentrations than residences located further away. Overall, the findings of this multi-city study, indicated that (1) spatial variation was larger for PN than for fine particulate matter (PM) mass and varied between the cities, (2) vehicular emissions in the residential street and location in the center of the city were significant predictors of spatial variation, and (3) the impact of traffic and location in the city was much larger for PN than for fine particle mass.     

Measurement of particulate aliphatic and polynuclear aromatic hydrocarbons in Santiago de Chile: source reconciliation and evaluation of sampling artifacts

Using a novel sampler, particulate organic compounds were collected in Santiago de Chile from June 9 to August 10, 1997. This sampler consists of a diffusion denuder to remove gas-phase organics prior to particle collection, a Teflon filter, and a PUF cartridge downstream of the filter. PAHs and n-alkanes were measured using gas chromatography/mass spectrometry analysis. Volatilization of particles collected on the Teflon filter varied from 15 to 85% for both n-alkanes and PAHs, with strong dependence on molecular weight. The relative distribution of n-alkanes and the values of molecular diagnostic ratios, such as Carbon preference index, indicated a mixed origin with strong anthropogenic input. Indeed, CPI values ranged from 0.66 to 1.96 (for the whole range of n-alkanes). The percent contribution of leaf “wax” n-alkanes (4.55–20.83%) indicated the low contribution of biogenic sources. In addition, the distribution pattern of PAHs was characteristic of anthropogenic emissions. The dominant contribution of combustion-related PAHs (CPAHs), 74–84%, indicated that vehicular emissions was the major source of PAHs.