Atmospheric deposition of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and dioxin-like polychlorinated biphenyls in the Kanto Region, Japan

The atmospheric bulk (dry and wet) deposition of dioxins was investigated at four locations (Tokyo, Yokohama, Tsukuba, and Tanzawa) in the Kanto region (in Japan) over one year using a stainless-steel pot. Annual average polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDD/PCDF) deposition fluxes were estimated to be from 450 to 1300 ng/m2/yr, and the annual average TEQ fluxes from 5.7 to 17 ng-TEQ/m2/yr at the four locations. The PCDD/PCDF deposition flux was higher in winter than in summer. The deposition flux could be related to ambient temperature, particularly for less chlorinated PCDDs/PCDFs, while the deposition flux is not necessarily related to the amount of precipitation. The PCDD/PCDF deposition flux increased as the particle deposition flux increased, for the winter samples. Based on the ratio of the PCDD/PCDF deposition fluxes to the particle deposition fluxes, the contribution of the reentrainment of soil particles to the TEQ of PCDD/PCDF deposition was considered to be negligible in this region. Based on the air concentrations monitored near our deposition sampling points by the municipalities, the ratio of the annual deposition flux to the annual average air concentration was roughly estimated to be 0.082 cm/s. The range of deposition flux in the Kanto region was estimated to be from 1.5 to 31 (median: 9.8) ng-TEQ/m2/yr based on the range of air concentration data measured by the municipalities. The total annual deposition flux in the entire Kanto region was estimated to range from 50 to 900 g-TEQ/yr (median 320 g-TEQ/yr). This estimated flux was of the same order as the sum of estimated emissions from municipal solid waste incinerators and industrial waste incinerators in the Kanto region. The contributions of dioxin-like PCBs in Yokohama, Tsukuba, and Tanzawa depositions were less than 10% of the total TEQ; however, in Tokyo it was almost equal to or more than 50%.     

Non-aqueous-phase-liquid breakthrough during evaporative drying of clay barriers

In this study, an attempt has been made to model a real field scenario, whereby an initially almost saturated clay liner in a waste site is gradually drying, due to evaporation at its lower boundary. A detailed conceptual model that deals with the penetration and breakthrough of non-aqueous-phase-liquid (NAPL) in clay liners is introduced. Water content of clay samples was monitored during ambient evaporation through apertures at the base of sample holders. Clay drying rate served as the primary parameter for the NAPL breakthrough study. The interconnection between drying rates, structural damage formation (cracks and suction) and NAPL penetration is especially addressed. The processes taking place in the clay samples during drying appear to be associated with the capillary effects between the different fluid phases in the vicinity of either the NAPL-clay or the clay-air boundaries. A conceptual model of NAPL penetration and breakthrough of the clay layer has been considered, based on both indirect and direct observations of structural damages produced on either clay boundaries. A mutual interaction between these two boundaries is suggested and discussed. NAPL breakthrough is suggested to take place through cracks initiated on the upper soil surface.     

Artificial sweat enhances dermal transfer of chlorpyrifos from treated nylon carpet fibers

The dermal transfer and absorption of 14C-ring-chlorpyrifos from nylon carpet fibers was measured in skin penetration-evaporation cells with excised pig skin. Prior to application, synthetic sweat was applied to skin in half of the cells. Radioactivity was measured in receptor fluid, dermis, epidermis, tape stripping samples, and vapor trap samples during a 24-h period. The sum of radiolabel recovered from the dermis and receptor fluid represented the absorbed dose. There was no significant difference (p > 0.05) in percutaneous absorption between cells that received the synthetic sweat application and "dry" cells (1.3 +/- 0.3% of applied dose). There was significantly more (p < 0.05) radiolabel recovered from tape stripping (5.4 +/- 2.1 vs. 2.8 +/- 0.6%) and in the epidermis (4.5 +/- 0.8 vs. 3.1 +/- 0.3%) from cells that received the synthetic sweat application, which indicated synthetic sweat facilitated transfer of chlorpyrifos from a treated substrate to the skin surface. The measured value for percutaneous absorption of chlorpyrifos agreed with the value predicted from an empirical model previously developed for nitro compound-containing soil.     

Heavy and toxic metals in staple foodstuffs and agriproduct from contaminated soils

This article presents basic data on the content of Cr, Fe, Ni, Cu, Zn, As, Cd, Sb, Hg, and Pb in staple foodstuffs and agriproduct grown in Russia (Astrakhan region and the town of Belovo) and Egypt (Helwan region). The dependence of the concentration of metals in agriproducts on the content and chemical form of existence in irrigation water and soils is indicated.     

Methods for sampling and analysis of tropospheric ethanol in gaseous and aqueous phases

In this paper, we report on techniques for sampling and measuring ethanol in both the gas and aqueous phases of the lower troposphere. In the gas phase, the best sampling conditions were ensured by adsorption on Hayesep Q with a Chromosorb W AW coated with LiCl dryer (method 1) or by cryogenic trapping (method 2). An intercomparison campaign showed good agreement between both methods under various conditions. Method 1 (adsorption on Hayesep Q with dryer) is easier to set up and to carry away from the laboratory. Method 2 (cryogenic trapping) requires longer sampling time (up to 60 min while method 1 requires only 10-15 min). Method 1 is adapted to high concentrations of ethanol (>20 ppb) and low relative humidity (<30%). Method 2 gives more accurate results than method 1 for low ethanol concentrations (1-20 ppb). Comparing these results to previous studies, it is clear that sampling with appropriate solid adsorbents or with stainless steel canisters (with appropriate humidified air and short storage time) is adapted to urban or industrial environments where ethanol concentrations are high. Cryogenic sampling must be preferred for remote places where ethanol concentrations are low. Three techniques were tested for sampling ethanol in the liquid phase, namely solid phase microextraction, purge and trap injection, and direct injection. Among those, the latter was chosen for field measurements of ethanol in rain samples at an urban location. These first ever results at an urban location show concentrations ranging from <1 to 5 microM in rains, which agree with the expected range of concentrations. However, the purge and trap method showed detection limits that were 50 times lower and should be preferred for liquid phase ethanol measurements in rural and remote locations. Combining cryogenic trapping for the gas phase (method 2) and direct injection for the liquid phase is convenient and well adapted for a multiphase study of ethanol in the atmosphere, where simultaneous measurements in both phases are needed.     

Inclusion complexes of alpha- and gamma-cyclodextrins and the herbicide norflurazon: I. Preparation and characterisation. II. Enhanced solubilisation and removal from soils

The interaction of norflurazon with alpha- and gamma-cyclodextrins (CDs) yielded the formation of inclusion complexes at a 1:1 stoichiometric ratio in solution and in the solid state. Apparent stability constants of 50.7+/-1.6 and 37+/-1.7 M(-1) and an increase in herbicide solubility by up to five and fourfold for alpha- and gamma-CD, respectively, were determined from the phase solubility diagrams at 25 degrees C in water. Three processing methods (kneading, spray-drying and vacuum evaporation) were used to prepare norflurazon-CD solid inclusion complexes, which were characterised by infrared spectroscopy, differential scanning calorimetry and scanning electron microscopy. A high increase in the norflurazon dissolution rate was obtained with all the solid complexes with gamma-CD, but when alpha-CD was used, only the solid system obtained after the vacuum evaporation process showed a higher dissolution rate. This finding is a first step in the development of new, environmentally sound formulations of norflurazon (NFL), due to the capacity for increasing its dissolution rate and hydrosolubility, and thus diminishing the use of organic solvents. On the other hand, the effect of alpha- and gamma-cyclodextrin on the solubility of norflurazon in solution was also considered as a way of modifying its behaviour in the soil environment. Desorption studies of NFL from soils in the presence of alpha- and gamma-cyclodextrin were carried out using a batch equilibration method. The results obtained showed that alpha- and gamma-cyclodextrin greatly increased the removal of norflurazon previously adsorbed, proving the potential use of these CDs for in situ remediation of pesticide-contaminated soils.