In Situ flushing of contaminated soils from a refinery: Organic compounds and metal removals

This article demonstrates the applicability of in situ flushing for the remediation of soil contaminated with petroleum hydrocarbons at a Mexican refinery. The initial average total petroleum hydrocarbon (TPH) concentration for the demonstration field test was 55,156 g/kg. After six weeks of in situ flushing with alternate periods of water and water/surfactant, an average concentration of 1,407 mg/kg was reached, achieving a total removal efficiency of 98 percent. At the end of the process, no hydrocarbons such as diesel; gasoline; benzene, toluene, ethyl benzene, and xylene (BTEX); or petroleum aromatic hydrocarbons (PAHs) were found. Iron washing achieved a removal efficiency of 70 percent, and for vanadium, the removal efficiency was 94.4 percent. The volume of soil treated was 41.6 m³ (38 m²), equivalent to 69.5 tons of soil. A rough calculation of the process costs estimated a total cost of $104.20/m³ ($114.00/m²). Our research indicates that there are a few studies demonstrating in situ flushing experiences under field conditions where both organic (TPH, diesel, gasoline, PAHs, BTEX) and metal (iron and vanadium) removals are reported. © 2004 Wiley Periodicals, Inc.     

Trace Element Contaminants in Sediments From the Noaa National Status and Trends Programme Compared to Data From Throughout the World

The National Oceanic and Atmospheric Administration's (NOAA) National Status and Trends (NS&T) Programme has analyzed samples of surface sediment collected at almost 300 coastal and estuarine sites throughout the United States since 1984. the overall distributions for concentrations of each element are approximately lognormal allowing a definition of geometric means and of “high” concentrations as those exceeding the mean plus one standard deviation of the lognormal distribution. Those mean and “high” concentrations should be useful for comparing the NS&T data set and with other reports on sediment contamination. A world-wide data set, constructed from data in the literature, was summarized in an identical manner. It was found, after excluding locally extreme values, that the NS&T and world-wide data sets yielded very similar mean and “high” concentrations for Cu, Ni, Pb and Zn. Chromium was the sole element showing higher summary statistics in the NS&T data set, a result attributed to NS&T sampling in areas of naturally (not contaminated) elevated Cr content. It remains undetermined, however, why the world-wide data set, even with exclusion of “hot spots”, yielded higher means and “highs” for Cd, Hg, As, and Ag.     

Sequential removal of heavy metals ions and organic pollutants using an algal-bacterial consortium

The residual algal-bacterial biomass from photosynthetically supported, organic pollutant biodegradation processes, in enclosed photobioreactors, was tested for its ability to accumulate Cu(II), Ni(II), Cd(II), and Zn(II). Salicylate was chosen as a model contaminant. The algal-bacterial biomass combined the high adsorption capacity of microalgae with the low cost of the residual biomass, which makes it an attractive biosorbent for environmental applications. Cu(II) was preferentially taken-up from the medium when the metals were present both separately and in combination. There was no observed competition for adsorption sites, which suggested that Cu(II), Ni(II), Cd(II), and Zn(II) bind to different sites and that active Ni(II), Cd(II) and Zn(II) binding groups were present at very low concentrations. Therefore, special focus was given to Cu(II) biosorption. Cu(II) biosorption by the algal-bacterial biomass was characterized by an initial fast cell surface adsorption followed by a slower metabolically driven uptake. pH, Cu(II), and algal-bacterial concentration significantly affected the biosorption capacity for Cu(II). Maximum Cu(II) adsorption capacities of 8.5+/-0.4 mg g-1 were achieved at an initial Cu(II) concentration of 20 mg l-1 and at pH 5 for the tested algal-bacterial biomass. These are consistent with values reported for other microbial sorbents under similar conditions. The desorption of Cu(II) from saturated biomass was feasible by elution with a 0.0125 M HCl solution. Simultaneous Cu(II) and salicylate removal in a continuous stirred tank photobioreactor was not feasible due to the high toxicity of Cu(II) towards the microbial culture. The introduction of an adsorption column, packed with the algal-bacterial biomass, prior to the photobioreactor reduced Cu(II) concentration, thereby allowing the subsequent salicylate biodegradation in the photobioreactor.     

Levels and distribution of organochlorine pesticides, polychlorinated biphenyls and polybrominated diphenyl ethers in sediments and biota from the Danube Delta, Romania

Concentrations of polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and organochlorine pesticides (OCPs), such as dichlorodiphenyltrichloroethane (DDT) and analogues, hexachlorocyclohexanes (HCHs) and hexachlorobenzene (HCB), were measured in sediments and biota (invertebrates, 11 fish species and cormorant tissues) collected in 2001 from the Danube Delta, the biggest European wetland. DDTs were the predominant pollutants in all samples. A high variability in the concentrations of pollutants within the same species was observed and this was related to sampling location, age, length and sex. DDTs were also the main organohalogenated contaminants in cormorant muscle and liver, followed by PCBs, HCHs, HCB and PBDEs. The present levels of DDTs in cormorant tissues are lower than levels measured in cormorant eggs sampled from the Danube Delta in 1982 and 1997, respectively. The variance of delta15N for herbivores was much greater than for carnivores, while carp and bream showed higher delta15N signatures than expected, probably due to a higher dietary proportion of benthos, typically more delta15N enriched relative to pelagic biota.     

Distribution of organochlorine pesticides, polychlorinated biphenyls and alpha-HCH enantiomers in pork tissues

The distribution of HCH isomers, DDT analogues and selected PCB congeners in pork organs collected from the same individuals raised in Romanian farms was investigated. Organochlorine pesticides (HCHs and DDTs) were the principal contaminants in all samples, while PCB concentrations were low, in accordance with previously reported concentrations from Romanian animal farms. The most part of the pollutant load in the body is retained in the adipose tissue, with HCHs ranging between 16 and 27.7 ng/g lipid and with higher concentrations of DDTs ranging between 65.9 and 334.5 ng/g lipid. The highest PCB levels (up to 32 ng/g lipid) were measured in lung and liver. The lipid-normalized concentrations in the brain were lower than in all other tissues due to the presence of the blood-brain barrier or due to a lower proportion of the neutral lipids such as triglycerides. The highest concentrations of DDTs were measured in muscle and fat, with p,p'-DDE being the principal contributor and with a variable contribution of p,p'-DDD and p,p'-DDT. In liver, p,p'-DDD has a higher contribution to the sum DDTs, while in all analyzed livers, the concentration of p,p'-DDT was very low. beta-HCH was the most persistent HCH isomer in all tissues, accounting for 40-97% of sum HCHs. For all animals, the highest concentrations of beta-HCH and HCHs were found in liver, while the lowest HCH concentrations were measured in brain and spinal marrow. Additionally, the distribution of alpha-HCH enantiomers in the tissues was discussed. In all samples (except 2 brain samples), (+) alpha-HCH was depleted and (-) alpha-HCH was enantioenriched. Enantiomeric ratios in brain were the highest measured values between all organs. For all studied animals, ERs increased in the order fat < muscle < liver < brain.     

Green marketing mix: A case study of Brazilian retail enterprises

The challenges posed by the limited availability of resources means that retail operations and methods must be revised and redesigned. Against the current backdrop of changes, companies are seeking to innovate the way in which they market their wares. Within this context, this article discusses the “green marketing mix” from the perspective of Brazilian retail enterprises. In addition, the study described in this article sought to identify and highlight the elements that should be considered when defining strategically each variable within the green retail marketing mix. As part of this work, a case study was carried out on two Brazilian retail companies. The case analysis revealed that despite defining themselves as “green,” when their retail marketing mix was analyzed, the companies presented differing degrees of sustainability. Furthermore, expanding the theoretical framework for the green retail marketing mix is a crucial issue in the services sector, and it has significant, practical repercussions.     

Ambient ozone in forests of the Central and Eastern European mountains

Ambient ozone (O(3)) concentrations in the forested areas of the Central and Eastern European (CEE) mountains measured on passive sampler networks and in several locations equipped with active monitors are reviewed. Some areas of the Carpathian Mountains, especially in Romania and parts of Poland, as well as the Sumava and Brdy Mountains in the Czech Republic are characterized by low European background concentrations of the pollutant (summer season means approximately 30 ppb). Other parts of the Carpathians, especially the western part of the range (Slovakia, the Czech Republic and Poland), some of the Eastern (Ukraine) and Southern (Romania) Carpathians and the Jizerske Mountains have high O(3) levels with peak values >100 ppb and seasonal means approximately 50 ppb. Large portions of the CEE mountain forests experience O(3) exposures that are above levels recommended for protection of forest and natural vegetation. Continuation of monitoring efforts with a combination of active monitors and passive samplers is needed for developing risk assessment scenarios for forests and other natural areas of the CEE Region.     

Trace Element Contaminants in Sediments From the Noaa National Status and Trends Programme Compared to Data From Throughout the World

The National Oceanic and Atmospheric Administration's (NOAA) National Status and Trends (NS&T) Programme has analyzed samples of surface sediment collected at almost 300 coastal and estuarine sites throughout the United States since 1984. the overall distributions for concentrations of each element are approximately lognormal allowing a definition of geometric means and of “high” concentrations as those exceeding the mean plus one standard deviation of the lognormal distribution. Those mean and “high” concentrations should be useful for comparing the NS&T data set and with other reports on sediment contamination. A world-wide data set, constructed from data in the literature, was summarized in an identical manner. It was found, after excluding locally extreme values, that the NS&T and world-wide data sets yielded very similar mean and “high” concentrations for Cu, Ni, Pb and Zn. Chromium was the sole element showing higher summary statistics in the NS&T data set, a result attributed to NS&T sampling in areas of naturally (not contaminated) elevated Cr content. It remains undetermined, however, why the world-wide data set, even with exclusion of “hot spots”, yielded higher means and “highs” for Cd, Hg, As, and Ag.     

Assessment of Viral Contamination of Five Brazilian Artisanal Cheese Produced from Raw Milk: a Randomized Survey

Food and Environmental Virology - Enteric viruses have been described as important contaminants in fresh and ready-to-eat foods such as sandwiches, deli meat and dairy products. This is a...