Genetic Algorithm Usage in Water Quality Monitoring Networks Optimization in Gediz (Turkey) River Basin

Selection procedure of the optimum station combination for decreasing the station number from 33 to 14 in water quality monitoring network of Gediz river basin was applied using an optimization method. Gediz basin is one of the important basins and it covers 2.3% of the total surface area of Turkey. The technique includes two stages as the data preparation and the optimization. In the data preparation stage, firstly, alternative station combinations decreased and then station combination scores obtained from assigned selection criteria for point and nonpoint pollution management objectives. Finally, genetic algorithm applied to select the best combination. The results were compared with a prior solution that used dynamic programming as the optimization technique.     

Investigation of acute toxicity and the effect of cadmium chloride (CdCl2 . H2O) metal salt on behavior of the guppy (Poecilia reticulata)

In this study 96-h LC50 value of cadmium chloride (CdCl2 . H2O), a metal salt widely used in industry, was determined for the guppy (Poecilia reticulata, Pallas, 1859). The experiments were planned in four series of a total of 440 guppies employing the static test method of acute toxicity. 10 fish were placed in each replicate of each dose. The experiments were performed as four replicates, and behavioral changes in the guppy were determined for each cadmium chloride metal salt concentration. The data obtained were statistically evaluated by the use of EPA computer program based on Finney's Probit Analysis Method and a 96-h LC50 value for P. reticulata was found to be 30.4 mg/l in a static bioassay test system. This value was estimated to be 30.6 mg/l with Behrens-Karber's method. The two methods were in good agreement. 95% lower and upper confidence limits for the LC50 were 29.3 and 31.7 mg/l, respectively. The water temperature was kept between 21 and 23 degrees C. The behavioral changes observed in fish were, swimming in imbalanced manner, capsizing, attaching to the surface, difficulty in breathing and gathering around the ventilation filter.     

Polymer Supported Calix[4]Arene Derivatives for the Extraction of Metals and Dichromate Anions

Three newly synthesized polymer supported calix[4]arene ionophores (7–9) were synthesized, and their ion binding properties toward selected alkali (Li⁺, Na⁺, K⁺, Cs⁺) and transition metal (Hg²⁺, Ni²⁺, Cu²⁺, Co²⁺, Cd²⁺, and Pb²⁺) cations were investigated. It has been observed that these ionophores are not selective toward a particular metal cation but show better ion binding property as compared to monomeric calixarene derivatives (2 and 6). Ionophore 6 and its supported polymer were also employed in dichromate anion extraction experiments. The polymeric ionophore (9) was found an effective extractant for dichromate anion even at pH 7.     

Computational fluid dynamics assessment of damaging wind loads on the One Indiana Square tower

In this paper, we simulated damaging wind loads on the One Indiana Square tower in Indianapolis due to the storm of April 2nd 2006. We followed recommended practice guidelines for this urban wind modeling. First, a test case, Aerodynamics of Commonwealth Advisory Aeronautical Council (CAARC) building were modeled and simulated to compare with a publicly available experiment and other computational studies. Based on the modeling parameters in the CAARC study, then, as a clean building configuration, we modeled the One Indiana tower alone without surrounding buildings. Finally, the flow field around the tower including nearby downtown buildings were simulated. We used the Fluent flow analysis software tools. The domain was meshed using unstructured grids, the first boundary layer grid element being 10 cm (4 in.) and 15 cm (6 in.) in height from the tower and the ground for the CAARC building and the One Indiana tower, respectively. Two different wind directions of 260 \(^\circ \) and 280 \(^\circ \) at 137 km/h (85 mph) speed were considered to estimate wind loads on the One Indiana tower façades. Simulated pressure distributions on the tower and flow patterns over the downtown buildings were discussed to draw conclusions about the mechanism of extreme wind load that caused the damage. The simulations revealed that suction forces are almost twice higher hence more damaging at the corners of the west façades than straight wind. It was also seen in the simulation results that upstream building topology, specifically Chase, One America, and some low-rise towers, augmented the actual wind load unfavorably on the One Indiana Square tower. Although this study presents a specific case, the applicability of its findings are of more general interest. Similar wind events are common especially during storm seasons both in urban and suburban areas. In similar incidents, one can follow the same procedure to analyze their problems as certain modeling guidelines were followed in this study.     

Synthesis and Extraction Study of Calix[4]arene Dinitrile Derivatives Incorporated in a Polymeric Backbone with Bisphenol-A

Two new copolymers containing pendant calix[4]arene units with nitrile functionalities at their lower rim have been synthesized via nucleophilic substitution reactions involving 5,11,17,23-tetra-tert-butyl-25,27-bis(cyanomethoxy)-26,28-dihydroxy-calix[4]arene (3) or 25,27-bis(cyanometh oxy)-26,28-dihydroxy-calix[4]arene (4) with 1,5-dibromopentane and bisphenol-A. The phase transfer studies were performed by using liquid–liquid extraction procedures. It has been deduced from the observations that both copolymers show a good phase transfer affinity toward selected alkali, alkaline earth, and transition metal cations, unlike their precursor (3).     

Problems caused by land-misuse; the sample of Erzurum

In especially urban areas and their proximity, environmental pollution has reached a level which threatens both people and public health. Although environmental problems in Turkey have been studied for many cities, including Erzurum, no study is present combining all the environmental matters of the city with short definitions of problems it faces, therefore, this study attempts to reveal the definition of the scope and problem of pollution and land use problems in Erzurum and use of studies from developing cities elsewhere in the world for comparison of methods and solutions.     

An indicative method for determination of the most hazardous changes in slopes of the subsidence basins in underground coal mining area in Ostrava (Czech Republic)

Considering growing population and decreasing mineral resource reserves, the issue of undermining has been and shall remain very topical. This study aims to identify the mutual connections between mined out panels of a deposit and the final manifestations on the ground surface related to deep black coal mining. On the grounds of the identified connections, the study describes a method to simplify a common evaluation of undermined areas according to building site categories. Within the study, a demarcation of the areas was conducted in two localities in Czech Republic influenced by the effects of undermining in the Upper-Silesian Basin. In the allotment of the CSM Mine, an area unsuitable for founding structures was defined from the centre of the worked out workings to the distance of 175 m from the panel's edge, for which the corresponding break angle is 78.3°. Similarly, in the allotment of the Paskov Mine, an area unsuitable for founding structures was determined to the distance of 500 m from the panel's edge, for which the corresponding break angle is 50.2°. This demarcation may be implemented prior to deposit mining being aware of several physical-mechanical parameters of rocks in the deposit's overburden. Having mined out a particular section of a deposit, it is recommended to verify the values of break angle using the method described herein. The study may be applied as a relatively fast and effective method to evaluate future land use for planning.     

Solid phase extraction of Cd,Pb, Ni,Cu, and Zn in environmental samples on multiwalled carbon nanotubes

A simple and sensitive solid phase extraction (SPE) method on multiwalled carbon nanotubes (MWCNTs) is presented for the determination of cadmium, lead, nickel, copper, and zinc at trace levels combined with flame atomic absorption spectrometry. The effects of parameters like pH, sample volume, sample and eluent flow rates, eluent concentration, and volume and type of eluent on the recovery of trace elements was examined. The metals retained on the nanotube at pH 6.5 as α-benzoin oxime complexes were eluted by 10 mL 2 M HNO₃ in acetone. The influence of matrix ions on the developed method was also evaluated. The preconcentration factor of the method was found to be 50. The detection limits for Cd(II), Pb(II), Ni(II), Cu(II), and Zn(II) were found as 1.7, 5.5, 6.0, 2.3, and 2.4 μg L^?1, respectively. To test the accuracy of the method, the method was applied to TMDA-70 fortified lake water and Spinach 1570A standard reference materials. Addition recovery studies were applied to tap water and cracked wheat samples, and determination of the analyte elements was carried out in some food samples with good results.     

Assessment of imidacloprid toxicity on reproductive organ system of adult male rats

In the current study it was aimed to investigate the toxicity of low doses of imidacloprid (IMI) on the reproductive organ systems of adult male rats. The treatment groups received 0.5 (IMI-0.5), 2 (IMI-2) or 8 mg IMI/kg body weight by oral gavage (IMI-8) for three months. The deterioration in sperm motility in IMI-8 group and epidydimal sperm concentration in IMI-2 and IMI-8 groups and abnormality in sperm morphology in IMI-8 were significant. The levels of testosterone (T) and GSH decreased significantly in group IMI-8 compared to the control group. Upon treatment with IMI, apoptotic index increased significantly only in germ cells of the seminiferous tubules of IMI-8 group when compared to control. Fragmentation was striking in the seminal DNA from the IMI-8 group, but it was much less obvious in the IMI-2 one. IMI exposure resulted in elevation of all fatty acids analyzed, but the increases were significant only in stearic, oleic, linoleic and arachidonic acids. The ratios of 20:4/20:3 and 20:4/18:2 were decreased and 16:1n-9/16:0 ratio was increased. In conclusion, the present animal experiments revealed that the treatment with IMI at NOAEL dose-levels caused deterioration in sperm parameters, decreased T level, increased apoptosis of germ cells, seminal DNA fragmentation, the depletion of antioxidants and change in disturbance of fatty acid composition. All these changes indicate the suppression of testicular function.